Chapter I General
Article 4 In order to strengthen the university laboratory special equipment, facilities safety management, prevention of special equipment, facilities, safety accidents, to protect the personal and property safety of teachers and students, as well as teaching, scientific research order, according to the "People's Republic of China *** and the State of Special Equipment Safety Law", combined with the actual university, the development of this approach.
The second laboratory special equipment, facilities refers to the life safety, dangerous boilers, pressure vessels (including gas cylinders, the same below), pressure piping, lifting machinery.
Boiler, refers to the use of various fuels, electricity or other energy sources, the contained liquid heated to a certain
parameters, and the external output of heat energy equipment
Prepared for the scope of the volume is greater than or equal to the 30L pressurized steam boiler; the outlet water pressure is greater than or
equal to 0.1MP?a, and the power rating is greater than or equal to the 100?KW of pressurized steam boiler; outlet water pressure is greater than or
equal to 0.1MP? 100?KW pressurized hot water boiler.
Pressure vessel, refers to the gas or liquid, carrying a certain pressure of the closed equipment, the scope of its provisions
for the maximum working pressure is greater than or equal to
0.1MP?a, and the product of the pressure and volume is greater than or equal to 2.5MP?a.L gases, liquefied gases and liquids with a maximum working temperature higher than or equal to the standard boiling point of the Fixed containers and mobile containers; gas cylinders and oxygen tanks containing gases, liquefied gases and liquids with a standard boiling point equal to or less than 6?0 ℃ at a nominal working pressure greater than or equal to ?0.?2?M?P?a? and the product of the pressure and volume is greater than or equal to 1.0?MP?a.L.
Pressure piping, refers to the use of a certain pressure, for the transport of gases or liquids tubular equipment, the model
Surrounding provisions for the maximum working pressure is greater than
or equal to 0.1MPa gas, liquefied gases, steam media or flammable, explosive, toxic, corrosive, the maximum operating temperature is higher than or equal to the standard boiling point of the liquid medium, and the nominal diameter is greater than 25mm pipeline. Diameter greater than 25mm pipe.
Lifting machinery, is used for vertical lifting or vertical lifting and horizontal movement of heavy mechanical and electrical equipment, the scope of its rated lifting capacity greater than or equal to 0.5t lifts; rated lifting capacity greater than or equal to 1t, and lifting height of greater than or equal to 2m cranes and load-bearing forms of fixed electric hoist.
Chapter II Management
Article 3 of the special equipment safety should adhere to the principle of safety first, prevention first, energy saving and environmental protection. The state of special equipment production, operation, use of work to implement the classification, the whole process of safety supervision and management. Our university special equipment, facilities and safety implementation of school, college (unit) two-level management model, the use of units and their responsible for the use of special equipment, facilities and safety is responsible.
Article IV of the Laboratory and Equipment Management Division for the laboratory of special equipment, facilities, safety management of functional departments, responsible for overseeing the implementation of laboratory special equipment, facilities, safety management of specific methods, to assist the competent departments of the use of the unit to declare and apply for the use of registration procedures. Preparation of university-wide special equipment, facilities summary table. Assist the competent departments and safety inspection agencies to organize special equipment, facilities operators regular professional training and safety education, special equipment, facilities operators licensed to carry out inspections of our school.
Accident emergency plan, and regular emergency drills.
Article VI of special equipment, facilities, users are special equipment, facilities, safety management of the person directly responsible for, should obtain the appropriate safety qualifications to work with a license, the use of the process of strict implementation of operating procedures to ensure the safe operation of special equipment, facilities; should be special equipment, facilities, the use of the condition of the regular inspection, found that the problem should be disposed of immediately; in case of emergency, you can decide to stop the use of Special equipment, facilities and timely report to the person in charge of the unit.
Chapter III Purchase and Use
Article VII of the teaching, scientific research needs to purchase special equipment, facilities, units shall apply to the Laboratory and Equipment Management Division, after approval by the University Purchasing Center to arrange for the purchase.
Article VIII of the units should be purchased and used with production qualifications and qualified by the inspection of special equipment, facilities. Prohibit the use of state-ordered elimination and have been scrapped special equipment, facilities.
Article IX of the use of gas cylinders should be in the cylinder filling and leasing qualification of the operating unit to rent cylinders and fill the appropriate medium. Any unit on campus shall not use self-acquired gas cylinders, and are not allowed to fill any medium to the cylinder.
Article 10 of the units should be put into use before the special equipment, facilities, to the Laboratory and Equipment Management Division for registration procedures, the Laboratory and Equipment Management Division to the competent department for the use of the registration certificate, obtain the certificate of registration before use, and will be placed in the registration mark of the special equipment, facilities in a conspicuous position.
Article XI of each piece of special equipment, facilities should be in accordance with the requirements of the safety specifications to accept special equipment, facilities inspection agency for periodic inspection. Without regular inspection or test failed special equipment, facilities,
Not to continue to use. Regular inspection mark placed on the special equipment, facilities in a prominent position.
Article XII of the special equipment, facility managers should be used for special equipment, facilities for regular maintenance and regular self-inspection, and make a record; should be used for special equipment, facilities, safety accessories, safety protection devices for regular calibration, overhaul, and make a record; in the inspection of the expiration of one month before the expiration of the qualified inspection of special equipment, facilities, inspection agency to make Periodic inspection requirements.
Article XIII of the use of special equipment, facilities should be established by the management of the file, in the pieces of special equipment, facilities need to go through the end-of-life procedures should be transferred to the Laboratory and Equipment Management Division of the management of the file:
(a) special equipment, facilities, design documents, product quality certification, installation and use of maintenance instructions, supervision and inspection of proof of the relevant technical information and documents;
(a) special equipment, facilities design documents, product quality certification, installation and use of maintenance instructions, supervision and inspection of proof of the relevant technical information and documents.
(B) special equipment, facilities, regular inspection and regular self-inspection records;
(C) special equipment, facilities, daily use of condition records;
(D) special equipment, facilities and their affiliated instrumentation maintenance records;
(E) special equipment, facilities, operational failures and accidents records.
Chapter IV
Rules
Article XIV of the management at all levels and the relevant personnel should conscientiously fulfill their responsibilities, and effectively implement the "safety first, prevention first" management policy, the mismanagement of security accidents caused by mismanagement, according to the severity of the situation is seriously dealt with. Violation of laws and regulations in accordance with the law to investigate the legal responsibility of the parties concerned.
Article XV of these measures shall come into force on the date of publication.
Article XVI of these measures by the Laboratory and Equipment Management Division is responsible for interpretation.