Standard electric nursing bed bed using Shanghai Baosteel Q195 cold-rolled steel plate 1.2 mm thick, a stamping molding, the surface of the weld; frame using 1.5mm wall thickness of the steel pipe, the use of carbon dioxide gas shielded welding full welding process.
The headboard and footboard are made of imported ABS material with smooth surface; the switch is located outside, which can be easily loaded and unloaded, and can be inserted into the bedside card.
ABS guardrail, the use of damper device to control the speed and noise, caregivers with a hand with a small force can be easily operated lift
Configuration of φ130 center-control dynamic casters, high stability linkage system, stable and convenient brake. The main body of the caster adopts aluminum alloy die-casting process, sealed bearing, waterproof, dustproof, double wheel cake design to increase the landing area, increase stability. Polyurethane material does not lose color and is wear-resistant.
Configuration of Denmark LINAK safe voltage linear motor, stable and reliable performance, with a battery, continuous power outage work for 4 hours. No noise, long service life, is generally 3 times the domestic motor.
The bed is equipped with two foldable infusion rack jacks and four drainage hooks on both sides of the bed; the bed is equipped with a basin rack.
Can be controlled by the hand-held switch for various functions: the overall lift 500-700 mm; backboard and the horizontal plane angle of 0-70 degrees, calf board and the horizontal plane angle of 0-20 degrees, thigh board and the horizontal plane angle of 0-30 degrees; the overall bed tilt angle of ≥ 12 degrees forward and backward.
9, the hospital bed as a whole using Switzerland "Golden Horse" automatic spraying line, the use of Akzo powder electrostatic spraying, color and luster bright, firmly attached.
Manual nursing bed bed frame bending round the outer diameter of the tube should be smooth spraying layer should be smooth and even, uniform color;
Bed and bed frame assembly should be fixed firmly, shall not be loose. Handle rotation is flexible, can be folded back when not in use;
Three shaking bed back bed can be adjusted range: 80 ° ± 5 °, thigh position adjustment range: 40 ° ± 5 ° and the overall range of lifting: 520 ~ 720mm; double shaking bed back bed can be adjusted range: 80 ° ± 5 °, thigh position adjustment range: 40 ° ± 5 °; ordinary beds that is the height of the fixed for about 500mm.