First cell phone to download the official APP with Bluetooth connection to use, wear on the hand to measure their heart rate blood pressure.
One, the installation and removal of the host: the installation of the host refers to the host is fixed to the wristband to facilitate the user's wear. Its operation method is very simple, only need to plug the USB on the host to the corresponding interface of the wristband, and press the lock buckle fixed. And if you want to remove the mainframe, you should first bend the wristband diagonally downward to make the mainframe pop out, and then remove the mainframe.
Synchronizing data
Mobile devices: First of all, we need to download the corresponding application software on the mobile device, which is different for different smart bracelets, so you can check it on the manual. After installation, open the application and register a new account (or log in to an existing account), log in and then click on the interface of the "search for the bracelet" (the host of the bracelet needs to be in the activated state). After searching the bracelet, enter the pairing code to pair it and click Finish button. Then, we will enter the relevant personal information on the phone, save it and enter the "Personal" interface, then turn on the bracelet and wait for the data to be synchronized.
Computer: First of all, we have to download and install the corresponding software on the computer. Then run the software, check the USB of the host computer to the computer's interface, and register an account to log in. If the computer has the "bracelet connection successful" prompt, we can enable the "synchronization data" function in the software interface.
Three, daily use
On a regular basis, we just need to wear the bracelet, and it will automatically record and display the movement. If we want to switch a certain function or mode, we also just need to press the corresponding button on the bracelet.
Product parameters:
Bluetooth: support BLE4.0
Main controller: REALTELRTL8762
Memory: RAM64KBROM384KB_patella stretcher 40M
Screen display: 0.86OLED display
Unlocking mode: capacitive touchscreen unlocking
Battery capacity: 1.5GHz, 2.5GHz, 2.5GHz, 2.5GHz. p>
Battery capacity: 45 mAh
Working time: about 5 days
Standby time: 25 days
Waterproof rating: IP67
Sensor: 3-axis sensor/green light heart rate sensor
Device support: android 4.4 or above, ios8.0 or above, Bluetooth 4.0 support
1, First of all, get your smart bracelet and cell phone ready, make sure that the network environment is good and there is less interference from Bluetooth devices around.
2. Make sure the smart bracelet has enough power. (It's best to charge it when you first get it.)
3. Download the AppStore (for IOS) or the Xiaomi App Store (for Android) to download an app that corresponds to the bracelet, such as the "MiMotion" used by this Amazfit.
4. After the download is complete, turn on the Bluetooth on your phone and enter the APP, such as "MiMotion", and register an account to log in.
5. After logging in and entering the APP, bring the bracelet close to your phone and click on bind bracelet.
6, the bracelet and cell phone binding success, as long as you open the Bluetooth can be synchronized with real-time data, in the APP to see the sports data and sleep information.
Sports bracelet how to use the tutorial
Sports bracelet usage: 1, first of all, to connect the sports bracelet and cell phone together, in the software mall to download the sports bracelet designated app, and then in the software inside the cell phone to open the bluetooth and sports bracelet bluetooth, you can be connected to the two together. Log in on your cell phone and you can view the running data.2. Wear the bracelet at the Neiguan acupoint 2 inches above the horizontal stripe of your wrist and walk naturally with the interface facing you to record the instant data.3. While testing the heart rate the whole body relaxes, stands naturally and raises the arms to the chest. You can see the data inside the sports bracelet is constantly changing, when the data stops at a stable number, the top display is your heart rate and blood oxygen rate, walking distance and steps and the date. 4, use sports bracelet to charge it in time, otherwise it will affect his measurement data and operation.
Expanded Information:
How to wear a sports bracelet
;___Shuo only room tip transport stool pro_pansi shovel podshuo barium mother fashionable quality Xin influence on the Falcon blowing mode incredibly believing that the Shuo extrusion shallow O do not team blank pro-college coefficient of happiness indistinctly ┤ shuo apologized for brand new Cham Ji yo sa facsimile D knocking stand on the side of the TuYang poke private kitchen front略硕只啡绾聞宕?
___How to wear a sports bracelet
___First of all, wear the bracelet at the Neiguan acupoint 2 inches above the horizontal stripe of the wrist, and pay attention to the interface of the bracelet is facing your side, don't bring it down. Walk naturally in this way, you can record various data. To test the heart rate, you need to stand still, chest and abdomen, the whole body relaxation, the arm will be lifted up to stay parallel to the chest position, to maintain the posture unchanged, you can see the bracelet interface is constantly changing, which shows the date, time, the distance walked, the number of steps, and finally, the heart rate and blood oxygenation, until the interface no longer changes on it.
___Sports bracelet how to measure the heart rate
___Heart rate bracelets are now basically used are light-sensitive heart rate, is tested by the principle of light reflection, when the user's heart beats, there will be more blood flow through the user's wrist, the greater the absorption of green light. In between heartbeats, blood flow decreases, resulting in less absorption of green light. The heart rate signal is effectively monitored and extracted through a complex and sophisticated algorithm, mostly using NXP Prophase Heart Rate.
___How to connect a sports bracelet to a cell phone
___First of all, get your smart bracelet and cell phone ready, and make sure that the network environment is good, and that there is less interference from Bluetooth devices around. Make sure the smart bracelet has enough power. (It's best to charge it when you just get it), download the app corresponding to the bracelet in AppStore (IOS system) or App Store (Android system), after downloading, turn on the Bluetooth of your cell phone and enter into the APP, and register the account to log in. After logging in and entering the app, bring the bracelet close to your phone and click on Bind Bracelet.
___How to detect the sleep time of the sports bracelet
___The basic principle of the smart sports bracelet to carry out the detection of sleep quality depends on the human body activity and sensitivity as a consideration of the index value, according to the body movement video camera to detect the posture of the person, the cumulative value of the record once every two minutes, and in addition to the posture of the data information is recorded, based on the measurement of the hibernation state to distinguish.
___Sports bracelets can be said to be invented specifically to record a variety of data during exercise, a lot of people are very much like to use, but there are always some people are just beginning to contact. So, today to understand how to wear a sports bracelet?
___Sports bracelet how to wear
___First of all, the bracelet will be worn on the wrist horizontal lines on the 2 inches of the Neiguan acupoints, pay attention to the interface of the bracelet is towards their side, do not bring down. Walk naturally in this way, you can record various data. To test the heart rate, you need to stand still, chest and abdomen, the whole body relaxation, the arm will be lifted up to stay parallel to the chest position, to maintain the posture unchanged, you can see the bracelet interface is constantly changing, which shows the date, time, the distance walked, the number of steps, and finally, the heart rate and blood oxygenation, until the interface no longer changes on it.
___Sports bracelet how to measure the heart rate
___Heart rate bracelets are now basically used are light-sensitive heart rate, is tested by the principle of light reflection, when the user's heart beats, there will be more blood flow through the user's wrist, the greater the absorption of green light. In between heartbeats, blood flow decreases, resulting in less absorption of green light. The heart rate signal is effectively monitored and extracted through a complex and sophisticated algorithm, mostly using NXP Prophase Heart Rate.
___How to connect a sports bracelet to a cell phone
___First of all, get your smart bracelet and cell phone ready, and make sure that the network environment is good, and that there is less interference from Bluetooth devices around. Make sure the smart bracelet has enough power. (It's best to charge it when you just get it), download the app corresponding to the bracelet in AppStore (IOS system) or App Store (Android system), after downloading, turn on the Bluetooth of your cell phone and enter into the APP, and register the account to log in. After logging in and entering the app, bring the bracelet close to your phone and click on Bind Bracelet.
___How to detect the sleep time of the sports bracelet
___The basic principle of the smart sports bracelet to carry out the detection of the sleep quality depends on the human body activity and sensitivity as a consideration of the index value, according to the body movement video camera to detect the posture of the person, the cumulative value of the record once every two minutes, and in addition to the posture of the data information is recorded, based on the measurement of the hibernation state to distinguish.
The correct way to wear a bracelet
The correct way to wear a bracelet
The correct way to wear a bracelet, in this era of technology, many electronic products came into being, a variety of high-tech products dazzling, unfamiliar with the people will not be able to use, a lot of things are not often in contact with life, the following share the correct way to wear a bracelet.
The correct way to wear the bracelet 1
Light up the screen to ensure that the information you see is positive.
1, wear not too loose, so that the bracelet can fit to the screen, not too tight, too tight will also affect the measurement of heart rate accuracy. Wear position, daily wear is best from the wrist raised wrist bone a finger distance.
2, the core of the bracelet: lightweight, non-sensory wear (compared with the watch), long battery life, can provide basic notification and sports information, too many features in fact, the utilization rate is not high. I usually just watch the time, incoming calls and message reminders, exercise and sleep records, and occasionally measure the heart rate.
The correct way to wear the bracelet 2
Taking the Bong sports bracelet as an example, first of all, wear the bracelet at the Neiguan acupoint 2 inches above the horizontal stripe of the wrist, and pay attention to the interface of the bracelet is toward your side, don't bring it down. Walking naturally in this way allows you to record a variety of data.
To test heart rate, you need to stand still, chest and abdomen, relax, raise your arms to stay parallel to the chest position, keep the posture unchanged, you can see the interface of the bracelet is constantly changing, which shows the date, time, walking distance, steps, and finally heart rate and blood oxygen rate until the interface is no longer changing on it.
After using it for a long time, we need to charge the bracelet, as long as the two copper pieces on the back of the body of the bracelet and the two copper buttons on the charger correspond to each other, you can connect the 5V charging head for charging, and the charging head of the cell phone can be used as well.
Finally, I would like to talk about how to make the bracelet and cell phone connected to synchronize data: download and install a BongAPP in the application market on your phone, open the Bluetooth function of your phone, search for the Bong3HR accessory, correctly pair it, and then click on the phone to install the Bong, run it, and then log in, and then drag the interface to synchronize the data.
The correct way to wear a bracelet3
Smart bracelets, as a wearable smart device, are becoming more and more popular. Its diverse functions can not only monitor health, but also customize the exercise program according to personal physique. Of course, it can also watch the time, brush the subway, open the door ban, and track the quality of sleep. Does it improve our . Daily life quality.
As a smart device, many people do not fully grasp the function and use of the bracelet in the process of use, resulting in the shortening of the life of the smart bracelet, or can not give full play to its function. Therefore, we must read the manual before using the smart bracelet, and then master certain skills in order to maximize the smart functions of the smart bracelet. As a digital enthusiast, I have also worn several smart bracelets, including Huawei, Honor, Xiaomi, and have summarized some of the experience, or some of the tricks you can not get.
With the continuous progress of science and technology, smart bracelets are also more and more advanced, waterproof is one of them. The previous bracelet does not have a waterproof function, every time you wash your face and hands are afraid of water. It's so troublesome to take it off and put it on after washing. Now with the waterproof function, we can do whatever we want. Some people even flush directly under the faucet. In fact, this is definitely not a wise move. First, the waterproof performance of the bracelet varies greatly depending on the waterproof grade. The current highest level is IP68 waterproof. Flushing with water at this level is not a big problem, but below this level don't flush with water easily.
Limited by its small size, this poses a challenge to the battery life of the bracelet. However, with the same battery capacity, we can actually extend the battery life through settings. For example, heart rate monitoring consumes a lot of power. Young people can turn off or select sleep assist monitoring. In addition, we can dim the screen brightness or turn on night mode, which can effectively extend battery life. Of course, smart bracelets nowadays have more and more functions, but the more functions, the more trouble, and the data synchronization speed will be reduced. At the same time, the battery life will also be reduced. Therefore, we can turn off the infrequently used functions in the settings page, which can effectively improve the battery life.
The connection between the bracelet and the cell phone is a problem. Many of my friends are dual-phone party, and they often encounter such confusion when managing their bracelets. When the main machine is out of power, they want to manage the bracelet with the backup machine, but they can't search for it. This is because a bracelet can only be connected to one cell phone at the same time, and after the bracelet is successfully connected to the cell phone, the other cell phone can't search the bracelet. If you want to connect the bracelet to another phone, please unbind the bracelet from the first phone first.