What is the status of the company spray plating? From October 2006 to July 2008, I worked for a company that is said to be the originator of nanojet plating, and analyzed the status of companies that invested in nanojet plating technology during this period (October 2006 to July 2008).
This company advertises its products with high quality design, which is the best in nanojet plating technology.
The company's advertisements are high-grade design, first-class expertise, modern management concepts, advanced production processes have been through the Foxconn, Dibit Note, Hewlett-Packard and other well-known electronic enterprises technical testing. Products are exported to Europe, America, Thailand, Southeast Asia and the Middle East and other countries. And has strong technical force, advanced equipment and first-class professional and technical personnel, management personnel. We can provide customers with professional and perfect solutions and rapid technical support. In 2005, nano spray plating has been promoted to the market for nearly 4 years, in the end, the investment in the use of nano development of the world's leading level of nano spray plating technology: simple operation, high technology content, can be in a certain range to replace the water plating and vacuum plating, safe and harmless, green, all raw materials all tested by the SGS does not contain the 8 heavy metals, can be applied to the EMI industry, the performance of the EMI / rf2 Technical specifications.
Note: Foxconn, DiBiT these two companies is my service to the company during the responsible customer, from the customer to send samples of the sampling process, has been by my follow up, the company has been too high to the customer sample requirements or the need for special coatings blending on the grounds that did not move. All the above two companies are used to test the sample and sent to other customers, there are some parts as scrap recycling. Not at all provided to the above companies, I do not know how to pass the above two companies technical testing, debatable
It looks or sounds good, but in the end why the market can not buy or see the surface of the product using nanojet plating treatment? What's going on? Here are a few examples for your reference:
Case 1: At the end of 2006, Guangzhou, a craft watch factory to understand the process of nanojet plating, in the early part of 2007 to invest more than one million to open a branch. For the introduction of nanojet plating technology. After the use of the technology found that there is no way to adhere to the surface of the resin products, spray plating out of the bad resin crafts piled up in the warehouse, repeatedly asked the supplier to provide technical support, the supplier to the company has not paid the final payment for the reason of refusing to provide. Finally, the company withdrew from the branch, no further.
Case 2: At the end of 2006, in order to show that nano-spray plating can be automated production, the company to participate in the way, to deceive their friends to participate. It is said to invest 3 million, in Dongguan Liao Bu Town, a place designed and manufactured so-called world's first nano-spray plating automatic production line, since April 2007, so far, open N times, only after several rework made more than 1,000 pieces of plastic and hardware products, and due to the surface of the product in the so-called 10,000-class dust-free automated workshop production out of the surface there is a dust spot, the customer did not accept.
Case 3: In May 2007, a craft factory in Longgang, Shenzhen, in order to suit the growth of market costs, after understanding the process of nano-spray plating, in the investment of more than a million to expand the new plant. For the introduction of nanojet plating technology. And by a nano spray plating company in Dongguan is responsible for the design and construction of the production line, the contract amount of 800,000 yuan, the completion time is 45 days.
After two and a half months, it was delivered to the company began to put into trial production, after the use of the company's design and construction of the dust-free automated workshop production out of the surface of the product and the dust point and granular, and the plating layer can not be attached to the surface of the product, the cost of production is much higher than expected, than the cost of outsourcing plating is high. Due to the technical support in the contract and delivery time limit compensation instructions, and ultimately because of the failure to meet the requirements of the user, Dongguan, a nano-spray plating company only responsible for their own design and construction of the production line dismantled back to the company. And compensation for the company's losses.
Case 4: In April 2007, Dongguan Dongcheng, a lighting factory, Dongguan, a nano spray plating company to participate in the way, in Dongguan Dongcheng, a place to design and manufacture a nano spray plating manual production line. Since July 2007 built in October, due to high cost, just after several rework, for a Yangzhou enterprise processing a batch of plastic products, the defective rate of 70%, resulting in customer losses, processing costs than expected 60% higher than the direct loss of more than 10,000, and the surface of the product in the so-called 10,000-class dust-free automated workshop production out of the surface there will be a dust spot, the customer did not accept, the processing fee has not been paid.
In the same period of time, the customer was not accepted and the processing fee was not paid.
The same period promised nano spray plating technology is not for sale lighting companies to encourage the company to build a nano spray plating hanging automatic production line in Zhongshan, behind the back of the encouragement of business people to promote vigorously during the Zhongshan Lighting Exhibition.
The automatic line was completed in November 2007, and will be in Dongguan Dongcheng somewhere in the nano spray plating manual production line relocated to Zhongshan. As of now, the company has not produced a batch of products since it was put into operation, did not produce any economic benefits, and behind the scenes will be the company's training of technical personnel sold to other customers.
Case 5: a friend emailed me, asked: technology is not mature, the boss know? The answer is yes, in June 2007, in Dongguan Chashan, a sports equipment factory know the head (a seventy-year-old man) personally to the Division to understand the nano-spray plating technology, it happened that my colleagues and colleagues together to receive, in the second half of the boss to come over to recognize and introduce the nano-spray plating technology.
After the guests left, the boss told me and another colleague: "This person is a hall master of Taiwan's Zhulian Gang in the early years, it is best not to do business with him, do not contact in the future."
What does this tell us? Personal opinion is that he knows that his skills are not able to meet the needs of customers, other people I can cheat. This person can not, because he must have been once a hall master of the Taiwan Zhulian Gang, even if it is many years in the past. He was worried that if the time to do not make the product and caused the other side of the loss, Taiwan Zhulian Gang can not afford to mess ah.