Guangu magnetic polishing machine operating points
1: Before starting magnetic polishing, the surface of the workpiece must be cleaned of oil and dirt. The polishing fluid cannot remove a large amount of oil and dirt, otherwise the workpiece will The polishing needle, water, and polishing barrel may turn black.
2: Cleaning fluid must be used when cleaning the magnetic polishing needle and polishing barrel.
Magnetic Polishing Machine Maintenance and Troubleshooting Methods
1: The magnetic polishing barrel is leaking. There is a magnetic polishing needle stuck on the bottom of the grinding barrel, which can be removed with pliers and add some glue
2: The timer does not flash and the start switch is not pressed. Press it to start timing.
3?: Please change the water in time when the water in the magnetic polishing bucket is overheated (the normal water temperature range is controlled within 50°C).
4:? The magnetic polishing machine vibrates greatly. Check whether each corner of the machine is in a stressed position and adjust the height and length of the Forma wheel.
5:? The indication is normal, but the machine does not work. Check whether the voltage is lower than 220V; whether the magnetic polishing needle is placed excessively.
Magnetic polishing machines have many wide applications. We should be more grateful to the development of science and technology. It is precisely with the continuous progress of science and technology that we can have such a good tool polishing machine
It has made such a great contribution to our modernization and manufacturing. So is there anything you need to pay attention to during the operation of the polishing machine
Because it is electric, you must pay attention to safety when operating it, otherwise you will be harmed
Causing potential safety hazards, safety training must be carried out before operating the high-speed polishing machine, so as to avoid danger.
Guangu Technology (Suzhou) Co., Ltd.
Main business: magnetic polishing machine, magnetic grinding machine, magnetic deburring machine, magnetic grinding steel needle, translational magnetic polishing machine
Aimed at: polishing and cleaning copper parts, removing oxide scale from copper parts, polishing and cleaning aluminum parts, deburring aluminum parts, removing oil stains from stainless steel parts, removing weld spots from stainless steel parts? Polishing and cleaning of various medical devices, and removing stamping parts It has very good results in polishing and cleaning CNC machined parts, deburring inner holes, polishing and deburring aluminum radiator plates, and cleaning and deburring special-shaped parts.