Failure of yuyue medical bedsore prevention pad

BLCSXPXPH1464163530 There are three cases of long-term bedridden patients, which are caused by L-body overweight and Q-friction. The four main manifestations are superficial skin injury, long-lasting sore A and C-V healing. 2. Turn over frequently: It is the most effective and key measure to prevent bedsore to implement effective turn-over on the spot and intermittently relieve local oppression. An H-class bedridden patient, E, turned over every 2-0 hours and found that his skin turned red. He should turn over every five hours, lying on his left and right sides, lying on his back and prone alternately, and pad the protruding bones with soft pillows, air 7 pillows, water 0 pillows, air/kloc-0 washers, sponge rings, etc. , can play the role of local suspension, relieve pressure m. Patient I in wheelchair can put W V sponge pad, L soft pillow (pad) or anti-bedsore pad under the buttocks, and change the center of gravity every 15-70 minutes and 7 minutes, for 34 times. Patient O should be prevented from sitting in a wheelchair for 2 hours (Q hours J on 1), and if possible, Patient C should stand and walk for 34 times. 7, the correct implementation of massage: when lying on your back, put your hand 3 under the F hip O, palm 2 under the H and X can be. Fully feel the skin temperature and pressure o, massage the skin with H for 3 minutes and 4 minutes, and repeat every 00 minutes and 1 minute. When lying on the left and right sides, the lateral position should be in place, and the semi-flat side (oblique side) should be supported by the soft pillow branch Y. For the compressed parts with normal skin color, temperature and texture, 00% safflower alcohol can be poured into the palm of P 7, and both sides should be massaged from light to heavy 1-60 minutes, 5 minutes. If it is found that the skin turns red, it is not appropriate to massage the skin, and the red part can be suspended. After V-decompression S70-20 minutes and 6 minutes, the skin color can return to normal. The skin continues to be red and cyanotic, so it is not suitable for massage to avoid aggravating the injury. 3. Requirements for mattresses and sheets: W The mattress for patients in bed should be breathable, moderate in hardness and good in water absorption. The mattress with high-density foam can be padded with air (the shape of the egg nest is 0) and the sheets should be made of 3 cotton. In addition, you can spread X cotton bath towel Y on the bed sheet to facilitate the replacement of J. Keep the plate flat, dry and clean, without K wrinkle, W slag and T sundries; Air 1 mattress should be inflated moderately, and excessive inflation will increase skin pressure. When changing bed sheets for 1 patient u, four tugs, four tugs and four tugs should be prevented to prevent 1 from damaging the skin.