First we electric hot water bag water filling plug. Open the small funnel diagonally against the bottom of the water filling port baffle, pay attention to make sure that the small funnel inserted into the bottom of the small funnel in the small funnel into the thread with the matching beverage bottle. Then fill the hot water bag with water, the amount of water should correspond to the product you purchased.
Then expel the air from the hot water bag. Twist the water filling port so that it is at the highest point, then slowly lower it, plug the water filling port with a small plug, and finally use a towel to dry the water stains on the charging socket and the body of the bag. Attach the cover, screw it on and it's ready to use again.
Commonly used quilt warming artifact in winter. Hot water bag literally means a bag with hot water inside. Modern hot water bag heats up the easy-to-heat substance inside by electric heating device, which eliminates the trouble of filling hot water, so electric hot water bag and electric hot cake are getting more and more people's favor.
Winter is the hot water bag to show their hands, but only use the hot water bag as a simple heating device, it is a little too big. In fact, it has a lot of unexpected health care uses to promote wound healing, with a hot water bag filled with warm water on the hands of hot compresses, the beginning of the hot quite comfortable, continuous compresses for a few days, the wound was completely healed.
Precautions: should not be filled with boiling water, 90 degrees Celsius hot water is just right, so you can prevent the rubber from aging in advance, do not fill too full, filling the hot water bag to 2/3 on the line, and then exclude the air inside the bag, the plug screwed tightly, and after the use of the water should be poured out, and then blow some air to prevent the inner wall of the adhesion, hanging upside down.