Is the floor heating system can also control the temperature like air conditioning?

Answer: the subject of this question, I guess you are the north or centralized heating users, in our southern or split heating system, floor heating system has always been able to control the temperature independently like air conditioning. I'm going to talk about the temperature control in the floor heating system in Sichuan.

The basic difference between centralized heating and split heating

Mentioning this issue, I guess we all know that the heat source is not the same, we are going to have an additional heat source boiler in the split heating system, which has a single-function and dual-function points, there is a difference between ordinary and condensing, it also has a wall-mounted and floor-to-ceiling differences.

The whole system in addition to the boiler, there are differences in the control system; in the centralized heating system, because it is the whole area of the same on and off, so there is no set control at home, and it is not possible to reflect the temperature difference demand. And in the home heating system, due to the use of personal gas heating, so in order to be more energy-efficient, more convenient to use, so based on the user's habits, household design control system.

In Sichuan, the floor heating system of several temperature control methods? Host control:

Such a heating system, indoor is no thermostat, but each circuit can be individually switched to adjust; it is the direct use of wall-hung boilers to sense the return water temperature to determine whether the indoor temperature to continue to warm up a kind of control, for example, we set the water supply temperature is set at 55 degrees, it is the return temperature is 45 degrees, when the return temperature is greater than or equal to 45 degrees to stop the The wall-hung boiler's operation.

The disadvantage of such a way is that because the wall-hung boiler is generally in the semi-outdoor (living balcony), the wall-hung boiler temperature probe is susceptible to interference with the outdoor temperature, bringing the return temperature of the detection is not allowed.

Host temperature control control:

Because of the temperature difference of the former, bringing high energy consumption or poor comfort, so the installation of a thermostat indoors, outdoor wall-hung boilers are directly connected to the thermostat. When the indoor thermostat senses that the ambient temperature is the same as the set temperature, the wall-hung boiler stops working; on the contrary, when the temperature inside the room is lower than the set temperature, the wall-hung boiler runs automatically.

Such a control system, the thermostat is usually placed in the large openings in the dining room, so that the indoor temperature to achieve the purpose of equalization, but also allows the user to easily manipulate, such as the first half of a key to set the indoor temperature, and then a key to return home to the indoor temperature, so as to achieve energy saving and convenient purposes; In addition, the entire heating system, each circuit can be manually switched to adjust.

Split temperature control:

In some large flat user families, the age structure of the personnel is not the same, so the winter temperature demand is not the same, so the last one can not satisfy such families. So we are on the basis of the previous one, in addition to the guest dining room set the thermostat, but also in each room set the thermostat, so that each room can set their own desired temperature, such as the parents room 22 degrees, living room 18 degrees, and so on.

Of course, such a control method is also very characteristic, because it must be noted that the temperature setting of each thermostat should not be too different, otherwise it is easy to bring too large a temperature difference, the phenomenon of increased energy consumption. Another thing is that the more controllers, the greater the rate of return, a few years after the return cost is higher.

Partition temperature control control:

In some villas or leapfrog house type, due to the split control in the villa will bring too many thermostat system, increase the rate of repair amount of problems, so often use partition temperature control control of such a control system. It is a thermostat control manifold for each floor, so that users only need to set the temperature of the thermostat for each floor, to achieve the temperature uniformity of the indoor floors, so as to achieve the purpose of energy saving, simple control.

In addition, the current wireless technology to expand the use of the above control system can be used in all wireless connection, so as to save the installation costs; can also be upgraded to the cell phone remote control, can also be mounted to the home intelligent control system, just for the floor heating system, the remote control of the cell phone in general is not of much practical significance.

In summary

In the split heating system, due to the use of single-family function, in order to be more energy-efficient, convenient, so each set of heating system has a control system; each circuit can be adjusted independently of the switch; each area can also be automatic temperature sensing control. Just when we choose the control system, will be based on the household situation, the structure of the staff to consider, the above content is only a popular introduction, for users to know the pros and cons can be, the actual use of much more complex.