3C certification information is as follows:
I. Certification mode
Type test + initial factory review + post-certification supervision
II. The basic aspects of certification
2.1 Application for certification
2.1.1 Application unit division
2.1.2 Application documents: 1) the list of key components and/or major raw materials;
2) the differences between the various models of products within the same application unit are explained;
3) other required documents.
2.2 Type Test
2.2.1 Sample Delivery: Select representative samples from the certification application unit for type test
2.2.21)Inspection Items: 1) Safety Inspection Items
Product testing items for the product safety standards for all applicable items
2) Electromagnetic compatibility inspection items
2) p>Insertion loss
Nuisance voltage
Radiated electromagnetic nuisance
Harmonic currents
2.3 Initial factory review
2.2.1 Review content: the contents of the factory review for the factory's quality assurance capability review and product consistency checks.
2.2.2 Product consistency check 1) the certification of the product logo and the type test report should be the same;
2) the structure of the certified products (mainly related to the safety and electromagnetic compatibility performance of the structure) should be the same as the prototype of the type test;
3) certified products used in the safety parts and the electromagnetic compatibility performance of the main components should be the same as the type test declared and certified. Type test declared and confirmed by the certification body consistent.
2.2.3 Initial factory review time: In general, the type test is qualified, and then the initial factory review
2.4 Evaluation and Approval of Certification Results
The certification body of the type test and factory review results of the comprehensive evaluation, the type test and factory review are in line with the requirements of the certification body assessment, the certification is issued (each application unit issued a certificate of certification)
3). Unit issued a certificate of authentication
III. Certification commissioned by the documents to be submitted
3.1. product description (at least should contain the following):
3.1.1 product categories
3.1.2 product name and model
3.1.3 product instruction manual.
3.1.4. Safety design documents (including key structural drawings, i.e., design drawings that reflect creepage distances, clearances, number and thickness of insulation layers).
3.1.5. Electrical schematic diagram of the product.
3.1.6. Product wiring diagram.
3.1.7. Key components or raw materials list
3.1.8. The whole machine or component certified copies.
3.1.11 Description of combination/mix/composite situation;
3.1.12 Other issues that need to be clarified.
3.2. Photographs of the product sufficient to identify the main features of the product.
3.3. Product drawings: general assembly drawings sufficient to identify the main features of the product;
3.4. List of key parts and materials of the product:
3.4.1 Key parts and materials of the product covered by these rules
3.4.2 The list should include at least the names, models, specifications, supply units and incoming inspection of key parts and materials Project and other content.
3.5. Factory Profile:
3.5.1 Production (production scale, capacity and production history of the product under application);
3.5.2 List of key production equipment in the factory;
3.5.3 List of major testing instruments and equipment in the factory (including: name, model, specifications, quantity, accuracy, calibration period);
3.5.4 List of key components, materials, at least including the name, model, specifications, supply units and incoming inspection items. p>
3.5.4 Relevant quality management system document catalog and organization block diagram/table and responsibility documents.
3.6. Necessary certification product test reports.
3.7. Proof of registration of the principal and factory.
3.8. Designated certification bodies need other documents
D. CCC certification fees
CC fees: application fee + registration fee + certificate + product testing fees + factory review fee + travel (+ agency fees)