Electroplating is the process of plating a thin layer of other metals or alloys on the surface of certain metals using the principle of electrolysis.
Plastic spraying:
Plastic spraying, in fact, is usually referred to as electrostatic spraying, is the plastic powder sprayed on the parts, and then the use of electrostatic suction charm ability to suction charm plastic powder on the gold layer, through the high-temperature baking channel so that the plastic melted into a layer of protective film of a surface treatment method.
Powder Coating:
Powder Coating is a solid powder coating, and the general coating is completely different form, it is in the state of micro-fine powder exists, does not contain solvents, and does not contain water. When spraying, just directly spray the powder coating on the iron or aluminum material after suitable pretreatment, etc., and then get the coating film surface with excellent performance after baking and melting and leveling.
Electrophoretic paint:
Electrophoretic paint coating is the conductive coated material is immersed in the water diluted in the concentration of relatively low electrophoretic paint tank as the anode (or cathode), and set up in the tank with its corresponding cathode (or anode), in the two poles indirectly through the direct current for a period of time, the surface of the coated material is deposited on the surface of the uniform, fine, not dissolved in the water of the coating film of a special coating method.
Difference:
1, electrophoresis paint layer can completely cover the hidden, and other painting methods and can not penetrate the hidden outside.
2, electrophoretic paint layer of high and low potential thickness uniformity, while other ways of spraying paint sometimes high and low potential at the coating thickness gap is large, uneven.
In summary, electrophoretic paint compared to other painting methods, in some ways, more advantageous.