Laboratory research work self-appraisal model
It is often said that: safety is higher than life, duty is heavier than Mount Tai. Laboratory of large-scale analytical instruments, part of the need to use high-pressure cylinders, to do a good job of high-pressure cylinder management, oxygen, nitrogen, hydrogen and other high-pressure cylinder storage to reach the experimental environment conditions. Flammable and explosive and toxic substances storage and distribution of the establishment of the necessary procedures and systems, familiar with the accident handling methods. Here is my laboratory work for you to bring self-identification, I hope you like!
Laboratory work self-assessment 1
Laboratory work is an important aspect of the quality of training students, so the management of experimental work to grasp the experiments as a breakthrough, through the experiments to stimulate the interest of students to improve the quality of the students, is an important part of the entire teaching program in our school, the leadership of the school over the years has attached great importance to the construction and management, and gradually standardize the laboratory work. Construction and management of the school over the years, gradually standardize the construction of laboratories, the formulation of "laboratory management regulations" and a variety of reasonable management system. The objectives of the laboratory are: prioritization of teachers, modernization of teaching facilities, standardization of instrument management, and informatization of experimental teaching. Evaluation for construction, evaluation for improvement, the laboratory work to a new level.
A teacher team prioritization
Teachers play an important role in the development of students, and science education, the subject of teachers put forward higher requirements, the average teacher is difficult to handle. School leaders are fully aware of this, in the teacher arrangement, constantly optimize the adjustment, and gradually constitute the present reliable, high-quality science teacher team. In recent years, the new curriculum reform, our school science teachers attentively participate in various types of teaching seminars at all levels.
Second, the modernization of teaching facilities
School leaders organized science teaching and research group has studied the "standardized laboratory construction standards for primary and secondary schools" and "standardized laboratory inspection and acceptance criteria", fully aware of the importance of the assessment. The establishment of science laboratories and instrument rooms, add a variety of experimental instruments, specimens, etc. It is no exaggeration to say that, with our existing teaching equipment and instruments, etc., fully capable of allowing students to carry out experimental teaching. In addition, also added multimedia equipment, more rich in teaching methods, so that the school's science teaching conditions and on a grade.
Third, the standardization of instrumentation management
As the school attaches importance to the management of experiments, so each semester the school plans and identification of laboratories are included in their own, and tasked with the implementation of specific personnel. Thus ensuring the implementation of the program. By the leadership, teachers, students form a top-to-bottom **** with the management, maintenance and operation of the ? Lifeline? Let the laboratory to operate in an organized manner, give full play to its potential functions.
1, the establishment of a sound management system to strengthen the management of instruments and equipment. From a practical point of view, the science teaching and research group has developed a series of rules and regulations from the acquisition of instruments to scrap, instrument lending to the return of a series of rules and regulations, in a timely manner to do a good job of the instrument subscription, instrument storage, instrument loss and compensation, etc., and often to do the inventory of the instrument, organizing, dusting. To do the account items in line with the fixed asset management, into the scientific management, modern management track.
2, with a good natural laboratory, play the role of equipment. We require teachers to effectively play the role of instruments and modern means to improve the effectiveness of teaching, after school for science and technology interest groups to bring a good environment for activities to cultivate students' innovative spirit and practical potential. At the beginning of the semester, we set up a schedule for experimental teaching and implement it strictly.
3, experimental teaching is a systematic process, the teaching of both the process, should also focus on the results.
Fourth, the laboratory teaching information
1, make full use of resources, attentively accommodate, absorb advanced teaching concepts, through the teaching and research group, the preparation of a series of activities, internalized into our self-teaching concepts, attentively undertake the activities of the municipal science group, give full play to the function of the laboratory.
2, give full play to the function of the blog, the release of the latest and most cutting-edge information on education and reform, fully encourage students to write a diary of experiments, give students the opportunity to succeed, enhance the students' information, but also will be the school of science education in a timely manner to be publicized, affirmation of the glittering.
Fifth, expand the way, taking into account other
School laboratory work and other work, the same is to promote the overall development of students a main position. In order to promote the overall development of students, cultivate students' innovative spirit and practical potential, we also vigorously carry out extracurricular scientific and technological activities, for students to build a platform to improve the potential for practical operation.
1, the use of laboratory attentively organize counseling, to participate in science and technology innovation contest.
2, attentive to the teacher demonstration experiments and student group experiments, after the end of the experiment to write the necessary insights, counseling students to write science and technology thesis, so far there have been several scientific thesis awards.
At the same time, our school also gives full play to the ingenuity of science teachers, the heart of the expansion, development of other scientific and technological activities, excellent school management, outstanding academic results, outstanding student results, but this is far from our ultimate goal, just the first step out of the long march, I believe that the management of our laboratories will be more of a higher level, and I believe that the effectiveness of our laboratories will be played better.
Laboratory work self-assessment 2
I do laboratory work has been more than thirty years. In its work, closely around the company's central task, based on the laboratory workstation, conscientiously fulfill their duties, conscientious, hard-working, working in this ordinary position. Study hard, work hard, is my work principle.
For this reason, mastered a hand over the laboratory technology. And in the leadership and colleagues care and guidance, through their own unremitting efforts, all aspects of the necessary achievements and improve, has now become the workshop technology veteran and operator. Now my work scene is identified as follows:
First, always strengthen their own learning, strengthen personal skills to improve the quality of business.
Laboratory work is the lifeblood of the production plant, reliable data supply is the basis for the sales department to speak. Therefore, it is very important to do a good job in the laboratory. I do as a laboratory old staff, in order to do a good job in the laboratory, it is necessary to strengthen learning, and constantly improve personal skills and business level. In the actual work, must have the perseverance of the tenacity and excellence of the drill, learning by doing, hard thinking, more accumulation. By a good learning effect.
First, a systematic study of laboratory expertise. After purchasing, borrowing from colleagues, online downloads and excerpts of past data from the laboratory and other forms of serious learning to master the laboratory knowledge and methods, and strive to improve the practical operation of the self and theoretical level.
Secondly, after learning, mastered the theoretical basis of the assay, the working principle and the relevant operation process.
Third, learning to memorize the relevant management system, such as the management of laboratory testing work, quality supervision work management, laboratory drug management, laboratory instruments, equipment management, and laboratory environment management. Take the laboratory as the entry point into the quality management work. Enterprising to participate in the group's organization of the laboratory examination and technical competition activities, increased insight, rich experience, in order to improve business skills, improve the quality of work, and with better results in the examination of the senior laboratory technician qualification certificate.
Second, serious and practical, objective and rigorous.
I as a laboratory, always with a high degree of responsibility, in the actual work process, in line with the principle of objectivity, rigor, meticulous, in the daily analysis of the work to be realistic, careful review, the courage to be responsible for the strict implementation of laboratory rules and regulations, the operating procedures of the instrument and the relevant quality standards. Strictly review and audit the unrealistic and unreasonable data, and resolutely implement the three-level checking work to ensure that the data is correct and not a problem before reporting.
Third, strengthen the safety education, improve safety awareness.
In the laboratory work safety awareness and environmental awareness is quite important. In practice:
First, the strict implementation of the company's various safety regulations to ? The seven think not to do it? The principle of self-restraint, always put safety in the first place, and forge ahead to participate in the safety activities organized by the company, adhere to the grasp of safety without letting up, and explore ways to be more secure, really put safety into practice. Before going on duty, the requirements of their own work must be invested, to do? One minute on the job, do their duty for sixty seconds? Take every job seriously, memorize the safety measures, God check around the security risks, do not panic in case of trouble, timely return, make a good record, stick to the post.
Secondly, environmental protection is also quite important, to do each chemical reagent and need to deal with the waste gas, oil samples, centralized classification and disposal, not randomly dumped. These are very influential on the environment. Such as in the scrubbing bottles, do not casually pour the oil-stained sewage. At the same time, attention to the ventilation of the laboratory and a variety of chemical reagents and oil samples management issues, to achieve smooth, neat and so on.
Fourth, the work attitude and diligence
I love my job, correctly and seriously treat every job, do a good job in the work before the individual work plan, there is a primary and secondary successive and timely completion of the work task. Enthusiastic service to all production units, as long as there is a need, I will be enterprising seriously to serve everyone, seriously abide by labor discipline, to ensure that the work task is completed on time.
In terms of style, can abide by the rules and regulations, solidarity with colleagues, pragmatic, optimistic, always adhere to a rigorous and serious work attitude and meticulous work style.
Looking back at the work experience and achievements over the years, it is also considered to have eyes **** to see. But in some areas there are still deficiencies and shortcomings. For example, there are creative ideas for work is not a lot, individual work is not perfect.
In the future work, we must continue to work hard to improve, and constantly learn the new business and new technologies, and strictly abide by the rules and regulations, so that the ideological awareness and efficiency of the work into a new level, a new stage.
The future work can be expected to be more heavy, the requirements are higher, need to master the knowledge of higher and wider. To this end, I will work more diligently, study hard, and strive to improve their own cultural quality and a variety of work skills to adapt to the needs of a higher and newer laboratory jobs to meet the new face of the net victory in 20 ___, for the safety of production in 20 ___ lay a solid foundation.
Laboratory work self-assessment 3
20__ year, in the center of the strong support and guidance, the testing laboratory to fully implement the two levels of the company? Great? Dry? The company has a lot of experience in the field of medical technology and has a lot of experience in the field of medical technology. Fast? What's going on? On? The spirit of all staff to work together, unity, and successfully completed the work of the task. Achievements must be achieved. Now the main work of this year is identified as follows:
First, the main work to complete the scenario
1, the new arrival of material testing and acceptance
20___ detection of various types of new arrival of 341 times, including wire and cable 198 times, conveyor belts, 56 times, petroleum products, 60 times, 18 times the plastic mesh assumption of the belt, polymer products, 9 times.
53 batches of unqualified products were detected throughout the year, of which:
(1) 33 times of unqualified cables were detected, due to unqualified DC resistance of the conductor 13 times, unqualified tensile strength of the cable sheath 16 times, and unqualified structural dimensions 4 times;
(2) 2 times of unqualified conveyor belts were detected, which were unqualified for the longitudinal tensile strength; (3) unqualified plastic nets were detected False top belt 17 times, due to alcohol blowtorch combustion test failed 2 times, mesh edge length failed 15 times.
The testing of new arrivals is carried out strictly in accordance with the relevant regulations and acceptance standards, effectively controlling the entry of unqualified products into Shendong, and strictly controlling the quality of the company's material quality and safe use of the quality gate.
2, fluid iron spectrum analysis
At present, the laboratory is responsible for the entire mining area 14 mines, 11 washing and loading system, such as 63 teams in the use of equipment fluid iron spectrum analysis and moisture testing. Up to now it has analyzed ___395 points, found 1390 abnormal points, 35 serious problems. The detection of abnormal points to the equipment preventive maintenance supply an accurate basis.
Key tracking and analysis of Haragou mine 22216 comprehensive mining face water quality, complementary Lianta mine __404 comprehensive mining face coal mining machine and Shangwan mine __205 comprehensive mining face coal mining machine left rocker arm planetary head, are correct diagnosis and effective prevention.
(1) Haragou mine 22216 face synthesized mining face underground reuse water has obvious precipitation, resulting in serious clogging of the hydraulic support pilot cartridge. After the water quality iron spectrum analysis, anti-rust performance measurement and mechanical impurity analysis, and combined with the water quality laboratory report, it was concluded that: iron ions in the water source in the process of following the flow of water, and the pipeline in contact with the air, constituting an insoluble iron oxide hydrate is the main reason for the clogging of the filter cartridge.
(2) The planetary head of the left rocker arm of the coal mining machine in the __205 comprehensive mining face of the Shangwan Mine has continued to be abnormal since July 20, with serious wear and tear. After shortening the sampling period, drawing 11 consecutive trend charts, and combining the results of industrial endoscopic observation, the following conclusions were drawn: the degree of wear is gradually increasing, mainly manifested as fatigue abrasive particles and laminar abrasive particles increase in size, with an average particle size of __0?m, indicating that all parts of the gear box are seriously worn, affecting normal operation, and it is proposed to dismantle the gear box and replace it. After dismantling and inspection, it was found that the first level of flange and bearing outer ring had contact friction wear, and the bearing outer ring had up to 1 meter of damage.
3, auxiliary transportation vehicle inspection
Completed the company's 14 mines totaling 20___ sets of vehicles into the annual inspection. Test items include light intensity, side slip, one-axle brake, two-axle brake and parking brake, of which all qualified vehicles are 1532, accounting for 73,9% of the total number of vehicles; brake test qualified vehicles are 1583, accounting for 76,4% of the total number of vehicles; light test qualified vehicles are 18__, accounting for 87,4% of the total number of vehicles; side slip test qualified vehicles are 1955, accounting for 94,4% of the total number of vehicles. , accounting for 94,3% of the total number of vehicles. Auxiliary transportation vehicle testing for the safe operation of vehicles to provide security, and for vehicle management data support.
4, equipment fault diagnosis
20__ year has been carried out on-site fault diagnosis 226 times, the volume of business in 20__ increased by 21, 5%, the diagnosis of the improvement of the level of business is to diagnose the basis of the increase in the volume of business. Among them: vibration analysis 37 times, chain test __5 times, equipment arrival acceptance test ___ times, material hardness test 35 times, in-use conveyor belt belt surface test 8 times, other items 29 times. The improvement of diagnostic level effectively eliminates the hidden danger of the equipment, avoids the equipment failure, and provides a reliable guarantee for the effective operation of the equipment.
5, the national laboratory accreditation successfully
20__ March 21, testing laboratory successfully through the China National Accreditation Board for Conformity Assessment on-site review, April 20, 20__ to obtain the certificate of laboratory accreditation. The accredited projects cover 11 products***98 test items in three categories: non-metallic materials, wire and cable, and petroleum products, and the test reports issued are recognized in more than 60 countries in the Asia-Pacific region.
6, Shaanxi Province, the successful acquisition of measurement certification
20___ ___ month 15, the testing laboratory successfully through the Shaanxi Province, measurement certification, and to obtain a certificate of conformity. Measurement certification program contains non-metallic materials, wire and cable, petroleum products, three categories of 17 products **** 99 detection test items, can issue impartiality test data, the report has legal effect.
7, the laboratory technical standards
Testing laboratory identification of iron spectrum analysis cases and belt conveyor drum shaft ultrasonic flaw detection in the Shendong mine application effect, reference to national standards and industry standards, analyze the statistical testing data, and constantly improve the judgment conclusion. After a year of data accumulation, the "Technical Standard for Iron Spectrum Analysis of Coal Mining Equipment Oil" and "Technical Standard for Ultrasonic Flaw Detection of Belt Conveyor Drum Shaft" were compiled and completed, and reviewed by an expert group organized by Shenhua Group Company.
The four patented technologies involved in these two standards have been applied to the State Patent and Technology Bureau by the Science and Technology Development Department of the Group. They are: the whole shaft penetration flaw detection method for belt conveyor roller shafts, the bearing housing insertion flaw detection method for belt conveyor roller shafts, the neck or unloading groove flaw detection method for belt conveyor roller shafts, and the equipment quality control method utilizing rotary iron spectrometers.
8, belt conveyor roller shaft flaw detection
From ___ month of 20__, the testing laboratory began to test the key parts of the whole mine roller, **** completed 280 roller shaft testing. Detection process found 17 roller defects, of which 5 defects smaller can continue to use, the rest of the ___ has been successively replaced, the beginning of detection so far the company did not occur belt conveyor roller shaft fracture accident.
The company's 14 mines are equipped with ultrasonic flaw detector, the organization of the company's mines, washing, transportation and marketing, maintenance center, equipment management center **** 18 units of 26 technicians to understand the ultrasonic flaw detector training, 24 people to obtain the second level flaw detector qualification certificate.
9, personnel training certification scenarios
20__ testing laboratory **** completed 32 training, **** organization 84 people to participate in, of which 24 units of self-training, outsourcing training 8 times, **** 22 people to obtain the qualification certificate of the relevant business.
In response to the technical weakness of the newcomers, the corresponding training program was developed in three stages.
(1) point to point training: the first expatriate learning, and then after the second lecture to drive the whole staff to learn, and take the form of teachers with apprentices to strengthen the training effect.
(2) business cross-training: each person is assigned to master 1 to 2 instruments, to all staff lectures, mainly to take the morning meeting training.
(3) the preparation of electromechanical testing business manuals and typical cases: the preparation of electromechanical business cell phone and carry out theoretical and practical training, after the continuous tracking of motors, gearboxes and other equipment, identification of equipment failures occurring in the regularity of the case of prevention of equipment failures are written for the entire staff to learn.
Second, there are problems
1, the level of equipment failure diagnosis can not meet the needs of the development of Shendong: At present, equipment failure diagnosis of the instrument, means to basically meet the needs of the daily work, but the personnel to analyze the technical skills are not up to the requirements, only to collect data and simply analyze the data, can not determine the root cause of the failure.
Reason one: personnel business basic quality is poor, the need for professional training;
Reason two: diagnostic personnel are fewer, more business, there is not enough time for research and analysis of data, resulting in less experience.
2, chemicals, tools, accessories procurement cycle is long: due to the special nature of the testing laboratory equipment, the material supply center has no corresponding spare parts; reported the slow progress of the procurement of material plans, which seriously affects the normal development of the testing work.
3, the new arrival of material testing and acceptance of the project is not complete: the laboratory can only carry out three categories of material testing and acceptance of 17 products, far from meeting the arrival of Shendong acceptance of the needs of the material supply center each year the arrival of about 5 billion yuan of spare parts, but only acceptance of less than ___ billion yuan. We need to continue to expand the testing program, improve the detection ability, from the source to completely eliminate unqualified products into the Shendong.
4, the labor force has become a destabilizing factor in the detection of work: the current testing laboratory **** 27 personnel, of which ___ for the labor force. Because of the low pay, laborers are unstable, mobility and other factors, resulting in detection and inspection level can not be steadily improved.
5, the low quality of personnel business, the need to strengthen professional knowledge training: testing laboratory personnel specializing in a large difference with the business engaged in, the knowledge structure of the transition difficulties, the need to strengthen professional skills training.