Small sewage treatment equipment pipe clogging how to deal with

Summary: small sewage treatment equipment is used in urban and rural areas to deal with domestic sewage equipment, it is easy to pipe clogging in the process of use, the general common causes are divided into chronic clogging and foreign objects falling into the blockage caused by two kinds of treatment methods are different. In order to prevent sewage treatment equipment often pipe clogging, should do a good job of pipe prefabrication, the use of high-quality pipeline materials, regular pipe desilting and so on. Below to understand a small sewage treatment equipment pipe clogging how to deal with it. A small sewage treatment equipment pipeline clogging how to deal with

The use of small sewage treatment equipment to deal with domestic sewage is a requirement of modern environmental protection, in the actual operation of the sewage treatment equipment pipeline clogging is a common problem, encountered this problem should be how to deal with the solution?

The causes of sewage treatment equipment pipeline clogging for many reasons, can be divided into two overall situations, the treatment method is different:

1, chronic clogging

Pipeline fluid material (such as domestic sewage oils and fats, etc.) through the accumulation of years, slowly attached to the pipeline wall, so that the pipeline gradually become thin, until clogging. As many small sewage treatment equipment is used in the A/O or A2O process, this situation is inevitable, and you can only hire someone to remove the sludge.

2, foreign matter falling into the blockage caused by

There may be large particles of foreign matter in the sewage, in order to prevent large particles of foreign matter into the integrated wastewater treatment equipment, sewage in the equipment before entering the need to place the grille will be larger foreign matter isolation; if the grille is damaged or can not play a role in this case, may occur, you need to take out the wastewater treatment equipment in the foreign matter, and replace the damaged grille.

Second, how to prevent sewage treatment equipment pipeline clogging

Sewage treatment equipment to deal with a lot of sewage every day, and sewage impurities into the pipeline may cause pipeline clogging, in order to avoid this situation, it is necessary to do:

1, according to the user's requirements and the environmental characteristics of the construction site to carry out the pipeline pre-fabrication, in accordance with the requirements of the planning before the use to Check the pipe standard, quantity, sign and quality.

2, pipe prefabrication, should be considered in advance whether the transportation and installation is convenient, leaving the adjustment of the mouth, prefabrication is completed, the pipe inside clean, closed mouth closed.

3, the use of the pipe requires a flat surface, no cracks, burrs, bumps and other defects, each section of the pipe labeled with the raw material standard of the steel pipe and the direction of the use.

4, after the pipe rack is made, it should be rust-proofed in time and well symbolized.

5, in order to prevent chronic clogging, pipeline desilting treatment should be carried out regularly.