Quality management refers to the determination of the quality policy, objectives and responsibilities, and through the quality of the quality system in the quality of the planning, control, assurance and improvement to enable the realization of all activities, EMBA, MBA and other mainstream business management education on quality management and its implementation of the method has been introduced. The following is my quality management personal work plan for you to organize a selection, just for reference hope to be able to help you.
Quality Management Individual Work Plan Selection 1
In 20_, the quality management work of my station will be in strict accordance with the "Laboratory Accreditation Guidelines" (CNAS-CL01, CL010, CL009), "Laboratory Accreditation Guidelines" and the "20_ Jiangsu Province, the quality of environmental monitoring". The requirements of "Key Points of Environmental Monitoring and Management Work", further optimize and improve the quality management system, carry out various quality control and quality assurance measures, strengthen the daily supervision, and strive to realize the whole field and process of quality management; start from strengthening personnel training, period verification, and traceability of quantitative values, etc., to further consolidate the foundation of the work, improve the quality of the work, ensure that the monitoring data and reports are accurate and reliable, and contribute to the "Three Clear Words". "The company's website has been updated with the latest information about the company's products and services, and the company's website has been updated with the latest information about the company's products and services.
First, strengthen the business training, and strive to improve the quality of monitoring personnel awareness and business skills
The quality of personnel awareness and business quality is the key to good quality management work, some of the personnel of the station for the quality of the awareness of the weak, the business quality of the problem is not high, vigorously carry out all kinds of quality and technical training: one is to learn the relevant technical specifications and methodological standards, focusing on the past two years, the new norms and standards promulgated by the State. National newly promulgated norms and standards, organizing no less than 15 centralized training, testing and evaluation of the effectiveness of training; Secondly, continue to strengthen the accreditation (certification) guidelines and this station system document learning, especially the laboratory accreditation guidelines, so that the monitoring work to further standardize the program, the form of learning is mainly room-level training and self-study; Thirdly, to take a combination of external training and internal training of large-scale The third is to take a combination of external training and internal training approach to the operation of large-scale instrumental analysts training, sending organic analysis, elemental analysts to participate in the ICP / MS, GC / MS training, outside the expert door-to-door on the continuous flow of analytical staff training; Fourth, with Agilent, the CDC and other units to jointly organize chromatography, spectroscopy, lectures on the application of the technology, using this platform to learn about advanced analytical techniques, exchange of experience and experience, through exchanges with the Yancheng Physical and Chemical Inspection counterparts to promote the exchange of large-scale instrumentation to improve the level of analysis; five from the actual demand, and actively participate in the higher units and accreditation, certification management bodies to organize various types of quality and technical training.
Second, in accordance with the principle of "continuous improvement" to continue to organize the revision and improvement of the system documents on this site
First, in view of the existence of problems in the management of my laboratory housekeeping, the development of the "laboratory housekeeping procedures"; second, in order to strengthen the management of instruments and period verification, revised The second is to strengthen the instrument management and period verification, revised "equipment management procedures", etc.; third is the atomic absorption, atomic fluorescence and other analytical raw records of the revision of EXCELL format, to improve the efficiency of data submission, the development of air sampler flow checking operations and records; fourth is the revision of the catalog of controlled documents in a timely manner, to supplement the new implementation of standards and specifications; fifth is the revision of the laboratory housekeeping problems in the station. standards and specifications; Fifth, revise and supplement other quality and technical records in a timely manner to ensure the timeliness, completeness and traceability of information records. Strengthen the use of records and archiving management, especially to strengthen the controlled quality record format improvement and use.
Third, to further strengthen the automatic monitoring quality control
Based on the "_ Provincial Water Quality Automatic Monitoring Station Management Measures (Trial)" (No. _X) and "_ Provincial Water Quality Automated Monitoring System Quality Assurance Implementation Rules" (No. _X) and the forthcoming "national key ambient air automated monitoring technology regulations", "national key cities water quality automated monitoring technology regulations" and other documents. Strengthen the city's water quality automatic station and atmospheric automatic station inspection, and actively participate in the provincial center organized by the standard sample assessment.
1, to participate in the province's air automatic station standard gas assessment, the assessment of the project for: SO2, NO;
2, to participate in the province's water quality automatic station standard sample assessment, the assessment of the project for: permanganate index, ammonia nitrogen.
Quality Management Individual Work Plan Selection 2
20_ years of hospital work is focused on meeting the review of grade hospitals, continue to carry out in-depth hospital management year activities, medical quality Miles activities and create a smoke-free hospital activities. Further establish and improve the management system of the department, strengthen management, the use of CR large-scale instruments, maintenance and installation of DR large-scale instruments and departmental hygiene and other related detailed training, the implementation of the post responsibility system, the job duties have been refined, and informed the staff of the department and the patient's safety and security protection, and to strictly prevent errors and accidents and safety accidents. The writing of the report further suggested that there are abnormal manifestations of the key description. The description of lesions should really reflect the process of observation. Abnormal signs should describe its location, size, shape, density, edge, number and its relationship with neighboring tissues, organs, or with normal tissue shifting band, etc., there is a differential significance of the negative manifestations should also be described, the description should be as far as possible to use medical terminology. "Radiology as an important hospital examination room and window, we have to pay close attention to and refine the management of the department, from the management of the benefits for the department to move into the new medical building after a new atmosphere for the work of the previous station."
1, invite experts from higher hospitals to our department for guidance and its training.
2, rigorous implementation of CR, DR examination "billing commission" and other methods.
3, to further establish and improve the department's management system to strengthen management. The establishment of a quality control group, the casting of photos, scanning, imaging quality of regular inspection and occasional spot checks, and further establish a sound quality management program, comprehensively improve the overall quality of technical staff; seriously Summarize the experience, vigorously consolidate and promote the results of the quality management team activities. And draw on the quality management team activities carried out in other places in the formation of outstanding activities and good experience and practice, exchange of quality management experience, discussion, development of rectification plans and measures. In the event of special circumstances held at any time, to discuss issues and summarize the work. Ultimately, we must adhere to the patient-centered service concept, to improve the quality of medical care as the theme, the pursuit of social benefits, the maintenance of the group quasi-benefits, to ensure the quality of medical care and medical safety, to build a harmonious relationship between doctors and patients, to provide patients with a good medical environment.
Quality management personal work plan selection 3
Production department in the product quality there have been several quality accidents, although a variety of reasons, such as the real stone paint prototype equipment and the transformation of the pipeline, it is difficult to do a hundred percent in place in the flushing, and the production of equipment equipped with insufficient equipment from the removal of the Jinding to install some of the equipment, use of the The years of use of some of the equipment removed and installed from Jinding are relatively long, the function and performance are not very stable, resulting in the alternate use of the existing equipment, leading to some products can only be specified in the alternate production of 1 or 2 machines, such as real stone paint, texture coatings and thick slurry-type products. There are also coloring personnel with different skills, also led to some coloring products have problems.
Through the analysis of product quality problems, 20_ years of quality management on the work plan is as follows:
1, to strengthen the quality of staff awareness:
At present, some employees still exist in the quality of their own, indifferent to the attitude of the production phenomenon that only care about the yield regardless of the quality of the production; this is related to the cultivation of quality awareness of the staff, to establish a sense of quality crisis, and the implementation of product quality responsibility system is not doing well, next year. Responsibility system to do a bad job, next year to start implementing the "quality management system", increase the control of the production process.
2, the establishment of full participation in the quality of the concept:
What we lack now is the full participation of the quality of consciousness, there is still product quality is out of the test, not out of the production of the misconception that the quality of the problem did not analyze the causes in a timely manner and to find a solution; sometimes there will be a production site management, but the implementation of the phenomenon of not in place. In short, it seems: product quality if only a few people up to management, want to do the best is impossible, it needs all levels of management personnel to actively cooperate and participate in the production department in the future production process, we must strengthen the process of control of the assessment to increase the product qualification rate of the factory to meet the standard.
3, the lack of quality record control:
Products throughout the manufacturing process, how to complete the record of the product process quality status is particularly important, if there is a perfect quality record, it will provide an accurate basis for product design changes, technical analysis, data search. Strengthen the engineering single implementation process control and assessment, but a lot of work also needs the assistance of the technical department to strengthen the details of the management.
4, in view of the above problems, the Ministry of Production decided in _ every quarter of the year, the process workers, color workers, part-time measurement by the technical department to assist in a training.
Quality Management Individual Work Plan Selection 4
In order to steadily improve the engineering and technology section of the technical level of all employees, the management level and the level of service for the project; continuous improvement of the company's quality management system; to promote the smooth implementation of various quality management activities and technical services, and the successful completion of the company's issued by the quality of the management work indicators, specifically Developed 20_ annual quality management work plan:
First, the project quality control objectives:
Engineering Technology Section around the company's overall deployment of quality management work, the strict implementation of the national mandatory quality standards, the construction department of the local standards and quality requirements, and strive to achieve the following goals:
unit project quality acceptance rate of 100 percent;
File acceptance rate of 100%;
Zero major and above quality accidents;
(4) process (sub-projects) a pass rate of 90% or more, after rectification of the pass rate of 100%.
Second, the main work
(a) sound and perfect engineering quality assurance system, solid quality work foundation. The establishment and improvement of quality assurance system as the focus of strengthening quality management. Combined with the actual company, the establishment of a perfect quality management organization, the formation of the company in charge of the leadership of the vertical responsibility and engineering staff focus on management and cross-checking the combination of learning management mode, to achieve quality management work of scientific, standardized, procedural and institutionalized.
(b) Improve the quality management responsibilities of personnel at all levels, so that the responsibility for the content is clear. The company's manager in charge of quality management work on the unified command and deployment of the unit's quality management work is responsible for the overall responsibility. At the same time, we should decompose the quality management and control objectives at all levels and implement them to each level of management personnel. Only give full play to the accountability of quality management personnel, in order to improve the level of quality management to a new level.
(C) strengthen internal communication. In order to ensure that the quality management system operation continues to be effective, to achieve the quality objectives, engineering and technology section through various channels and forms such as: quality analysis and technical exchanges, the organization of thematic activities (quality month, 100 days of competition), etc., to promote the effectiveness of the operation of the quality management system. Timely reporting of quality monthly report, the quality problems in the construction process should be analyzed, detailed description of the quality problems rectification situation. Engineering Technology Section from time to time held a quality analysis meeting, the stage of quality management work, project quality situation for statistical analysis, to identify deficiencies or problems, the development of corrective and preventive measures.
(d) Strengthen the quality of integrity management, comprehensively carry out the creation of owner satisfaction project. The company should be effectively in line with the improvement of quality, improve service for the purpose of ensuring that the "three implementations", one is the implementation of measures in place, the company to improve the quality management methods, quality control measures, check the implementation of the "three inspection system" and other measures to implement the situation; two is the implementation of the regulatory tools In place, the engineering technology section to develop project quality supervision and inspection plan, the key processes of the project, the key control points must be monitored and inspected; Third, the implementation of the responsibility goal, to clarify the responsibility goal, detailed decomposition to the project department, each team (work team), a clear responsible person, to determine the management responsibilities, the formation of objectives, responsibility management system, regular assessment of the completion of the target. In the process of project construction, we should carry out customer (owner, project manager, etc.) satisfaction surveys for customers' express requirements (contract, drawings) and implied requirements (progress, quality), find out the weak links in the management, formulate corrective and preventive measures, pay attention to the rectification of owner's feedback and tracking of the effect, so as to effectively achieve the effect of improving the quality and service, and achieve customer satisfaction. For owners to reflect the strong, there are serious quality problems of the project will be investigated to the end, the relevant person in charge of a certain economic penalty.
(E) do a good job of staff training, and steadily improve the technical level of staff and management level. Engineering Technology Section of several technicians just graduated not long ago, work enthusiasm and initiative is better, but the technical and theoretical knowledge reserves are insufficient, the lack of practical experience, in the theory of practical, construction site daily affairs, the handling of emergencies, engineering quality control details and key points and so on there is still a lack of. In the daily work need to strengthen the new staff to help, help, bring, so that they can become a unique technical talent, while improving the overall quality of engineering and technology section.
(F) do a good job of project services. Before the start of the project, according to the scale of the project for the project reasonable deployment of technicians, with the project department to do a good job of drawing review and technical briefing; in the main process acceptance, the Engineering Technology Section in conjunction with the Ministry of the project to do a good job of self-testing and rectification work, to ensure that the acceptance of the process of the acceptance of the pass rate of 100 percent.
Quality Management Individual Work Plan Selection 5
A, 20_ annual quality excellence target
1, create structure of excellence project 4: yingdong district youth activity center project, Anhui Province highway engineering technical school teaching building project, Anhui Yueying furniture limited company office building project, yingshang industrial park Guanying Road, public rental housing, a section of the project.
2, create "Amber Cup" 1: Anhui Province Highway Engineering Technical School teaching building project
3, create "Paeonia Cup" 1: Lixin Tianyu Hotel project
4, create "Yingzhou Cup" 1: Industrial and Commercial Bank of Fuyang Branch project
5, to create water conservancy and hydropower projects at the provincial level quality standardization site 2: Langxi Wangjiamen Reservoir Project, Feidong County, 20 _ annual Heyu 15 small provincial-level reservoirs in addition to the reinforcement of the project
Second, the quality of management work target
1, the annual completion of the project quality rate: 90%
2, the annual completion of the project a pass rate: 100%
Third, the quality of basic management work:
1, to strengthen the quality of basic management work, the preparation of the quality of management work requirements, so that the quality of management work is standardized, procedural, standardized.
2, strengthen the project quality control efforts, especially for public **** facilities projects, livelihood projects and social impact of the quality control of projects, the preparation of project engineering quality control plan, set the project engineering quality control points, from point to point and line to face quality control.
3, the full completion of the new project quality management needs of the quality of service guidance work, complete the monthly, quarterly, annual report on the quality of the project, the quality of the performance statement report work.
4, standardize the quality of basic management workflow, strengthen the site quality management system.
5, strengthen the development of the construction industry, the direction of understanding, strengthen the surrounding environment, the development of the industry to understand, learn, broaden knowledge, especially for some specialized knowledge learning, in line with the principle of seeking truth from facts, innovative work methods, improve the quality of the project.
6, strengthen the quality consciousness, establish quality brand, in the project project before the start of the company and the project signed a quality target responsibility, clear project quality requirements, in strict accordance with the quality of engineering excellence management measures to ensure that the company's quality management objectives.
Fourth, the process of quality control measures:
1, strengthen the control of structural and decorative quality of the disease, summarize and analyze the reasons for the reduction of the root cause of the disease from the source, especially to strengthen the quality of the secondary structure of the control efforts.
2, the quality of hidden works to do a good job of pre-control measures, the implementation of the "three inspection system", strengthen the acceptance procedures, strict process control.
3, strengthen the floor cracks, concrete sub-projects, pouring zone, template support and installation, reinforcing steel binding, ground sand, building energy efficiency and other quality control, comprehensively improve the quality of the project, and do a good job of excellence in the organization and planning.
4, for the characteristics of water conservancy and hydropower projects, to strengthen the ability to control the quality of water conservancy and hydropower projects in the early stage of quality control and process quality control measures.
5, to strengthen the project process planning, implementation, inspection and control work, in the daily work, often found and answer the actual problems of the project, the quality of the problem to a minimum.
6, strengthen the control of key parts, key processes, improve the operating level of the operating layer, through the quarterly assessment, monthly spot checks, hidden pre-inspection and other ways to check the project, the problems identified by issuing rectification notices, and tracking review. The problems of each project will be inspected and statistically analyzed, and then targeted to the project services and training, so that pre-control measures in place, the quality of the disease is reduced.
7, in the project quality inspection, some project highlights are summarized, edited, and timely communication of information with other projects, to achieve a good atmosphere of "compare, learn, catch up, help, and surpass".
Fifth, the project quality control measures
1, to strengthen the mandatory provisions of publicity, training and inspection work; through the inspection found that the project violates the point of the project decoration stage, in the future work to increase the project decorative pre-construction and renovation of the construction process of the inspection, strict control of the project in violation of the standards, norms and other issues occur.
2, the structural engineering, decoration works often appear in the field inspection of the disease *** with the analysis, reduce the emergence of the disease, improve the overall level of engineering quality, for the realization of the goal of excellence more engineering highlights.
3, strengthen the excellent project decoration detail inspection, supervision work, strengthen the construction of detail practice inspection efforts, so that project management personnel and construction personnel on the details, highlights of the project fundamentally have enough attention.
4, in the entity quality control, increase the pre-control efforts and process control, in the construction process, careful inspection, never let go of the problems that exist in the inspection, the more problematic projects, issued quality inspection control records, and review on schedule. And the organization of the project on the model project visits to learn, so as to promote the company's overall project entity quality continues to improve.
5, on the excellent project to increase service and control, from the project started, to "fine engineering", "Yingzhou Cup Project" and other quality objectives to strict requirements, the implementation of a monthly inspection, each quarter an assessment of the project control system, the excellent project quality training, providing The quality of the project to create quality training, provide the necessary technical support, and increase the process of supervision and inspection efforts.
In short, in 20_ to strengthen the process of quality supervision and control, to ensure that the overall quality of the better trend, in accordance with the company's requirements for pre-planning, develop goals and decomposition, strengthen the construction process control, from the process of each process to start, strictly in accordance with the procedures for the implementation of the quality of the management work to further improve the quality of work, and continue to move to a new level.
Quality Management Individual Work Plan Selected Related Articles :
★ Quality Management Department Annual Work Plan Selected
★ On the quality of the employee's personal work summary and plan selected
★ 2020 Workshop Quality Inspector Individual Work Plan Selected
★ The quality of the employee's year-end Work summary and plan model 5
★ Quality inspector personal work plan model selected
★ Quality Department annual work plan model
★ 2020 latest quality inspector personal work plan model template
★ Quality management work summary five
★ Quality Department annual work plan five selected
★ Quality Employee 2020 year-end work summary as well as work plan sample selection