Which effect is better, low temperature plasma sterilization or high pressure steam sterilization?
High temperature and high pressure can't disinfect mirrors and instruments that can't withstand high temperature. Please refer to the management measures of supply room promulgated by the Ministry of Health. 1 contaminated area 2 cleaning 3 drying 4 packaging 5 sterilization (1 high temperature 2 low temperature) 6 clean area 7 distribution for sterilization, which can be divided into high temperature and high pressure sterilization and low temperature sterilization. At present, there are two kinds of low temperature sterilization: 1: 100% pure ethylene oxide 2: low temperature plasma. Low-temperature plasma sterilization takes a long time, but the cost is high, so it is impossible to sterilize mirrors and test tubes that are too long and too thin (please refer to the instruction manual of Johnson & Johnson low-temperature plasma sterilizer). 100% pure ethylene oxide takes a long time to sterilize, but it has a wide sterilization range and low cost. In addition, it has been suggested that ethylene oxide is residual, toxic and dangerous. What kind of old mixed gas ethylene oxide sterilizer does it refer to? At present, the 100% pure ethylene oxide sterilizer is safe and reliable, and has the disinfection approval from the Ministry of Health. The advanced one is fully automatic sterilization and ventilation, which can be put in and sterilized after work, and can be used directly after work tomorrow.