Hello friend! The following brief introduction for your reference: stainless steel cartridge
Stainless steel cartridge disinfection:
Filter cartridges should be sterilized with steam before use, and the disinfection is divided into two kinds of disinfection in the steam sterilizing cabinet and online disinfection.
1. Sterilizer disinfection: Take the cartridge out of the plastic bag and place it in the sterilizer at 121℃ for half an hour.
2. On-line disinfection: install the cartridge in the correct way in the filter (fixed plate and cartridge spacing 0.5mm) through the steam for half an hour.
Stainless steel cartridge installation:
1. Wet the O-ring, slowly insert the cartridge vertically;
2. Don't tighten the cartridge too much;
3. Avoid touching the cartridge directly with hands;
4.
4. Rinse the cartridge well before use.
Stainless steel cartridge replacement:
1 Receive the replacement of stainless steel cartridge production instructions, make sure that the system has stopped running;
2 Prepare the appropriate stainless steel cartridge (specifications, materials, size, O-ring material, type, etc.), disassembly and removal of stainless steel cartridge. material, model, etc.), disassembly tools, collection buckets, rags, etc.;
3 Thoroughly clean the stainless steel filter housing, empty around the filter and leave the operation area. Bring protective gear;
4Disconnect the stainless steel filter, which needs to replace the stainless steel filter element, from the system. Slowly open the exhaust port at the top of the filter to depressurize it, and pay attention to safety in the process to prevent material or liquid from splashing;
5 Empty the material inside the stainless steel filter, open the filter cover with tools, take out the stainless steel cartridge, and load the stainless steel cartridge in a plastic bag to be cleaned or scrapped;
6 Clean the inside of the stainless steel filter with clean tools and wipes to be loaded. Clean stainless steel cartridge;
7 Open the plastic bag at the open end of the stainless steel cartridge and check whether the O-ring is intact and in place;
8 Install the inflow of materials according to the method of inflow from the outside of the cartridge and outflow from the inside of the cartridge;
9 Wet the O-ring and the cartridge seat socket with a suitable wetting agent (e.g., water) and hold the stainless steel cartridge near the O-ring end, vertically place the stainless steel cartridge in the O-ring and the cartridge seat socket. end, vertically insert the stainless steel cartridge socket completely into the stainless steel cartridge seat socket, insert the stainless steel cartridge, remove the stainless steel cartridge packing bag, then install the metal housing, and tighten the stainless steel filter with a tool;
10Close the stainless steel filter discharge port, open the bleeder valve at the top of the housing, slightly open the inlet valve, so that the material enters the housing until the liquid overflows from the housing's top bleeder valve overflows, at this time close the bleeder valve. Pay attention to check the disassembly place, whether there is leakage;
11 Slowly open the outlet valve of stainless steel filter until it is completely open. Indicates that the replacement is complete;
12 Clear away the tools used for replacement and cleaning tools. Clean up the surrounding sanitation.
Introduction of stainless steel cartridge:
Become a stainless steel cartridge has the characteristics of high precision, good permeability, high strength, strong corrosion resistance, easy to clean and backwash, not easy to damage, no material detachment. The stainless steel cartridge is mainly used for filtration of polyester, oil, pharmaceutical, food and beverage, chemical products, and also used for filtration of water and air and other media.
Become the stainless steel cartridge size specifications cover a wide range of all sizes and specifications parameters can be designed and produced according to customer requirements, but also according to the use of working conditions and requirements of the design of the recommended products. BeiCheng stainless steel cartridge connection interface variety is very convenient, according to the user to choose the appropriate connection, the main connection includes: standard interface (such as 226, 226NC, 222, 222NC, A222, B222, 220, 215, plane through DOE, DHKC, SK, SKNC, PT34-44, 34, 37, 4M, 19H, A22, DH116NC, IS116, M20, M30, M36, M42, etc.), fast card snap connection, a variety of threaded connections, flange connections, tie rod connections, special customized interfaces and other various connections. Material: stainless steel SUS304, SUS316L, etc., super stainless steel: Monel, Hastelloy, etc..
The main twelve advantages and characteristics of the stainless steel cartridge:
"1" Be presented series of filtration technology using the international advanced high-precision vacuum welding, original standardization of technology and process (Be presented through continuous innovation and development, the future will have more ultra-precision filtration technology to serve the world);
"2" range of precision: usually from 0.1 ~ 200 micron or more, applicable to a wide range of precision;
"2" precision range: usually from 0.1 ~ 200 micron or more. High-pressure resistance is very outstanding, especially for high compressive strength requirements and filtration particle size requirements of uniform occasions;
"4" low filtration impedance, permeability is very good;
"5" the material is high-quality food hygiene-grade stainless steel, wear-resistant performance is very good;
"6" the original world's advanced precision manufacturing process technology, the filter cartridge as a whole, smooth and no dead ends are easy to clean, without any material shedding;
"6" world advanced precision manufacturing technology, filter element overall smooth and no dead ends are easy to clean, without any material shedding.
"7" cold resistance is very good, the use of low temperature up to -220 degrees below (special ultra-low working temperature can be customized);
"8" heat resistance is very good, the use of temperature up to more than 650 degrees (special ultra-high working temperature can be customized);
"9" strong alkaline, acid corrosion and other working environments;
"10" has excellent backwash regeneration. 10" has excellent backwash regeneration performance, can be used repeatedly for a long time, especially suitable for continuous and automated operation process, is any kind of filtration materials can not be compared;
"11" a very wide range of applications for a variety of gases, liquids, solids, acoustic waves, light, explosion-proof and so on, (the main connection: the standard interface, < such as 222, 220, 226>, fast interface connection, threaded connection, flange connection, tie rod connection, special customized interfaces and so on.)
"12" comprehensive performance is significantly better than plastic powder, ceramics, fiber, filter cloth, filter paper and other types of filter materials. With high precision, high efficiency, long life and other special advantages.
Turn left | turn right
Turn left | turn right
Turn left | turn right
Turn left | turn right
Turn left | turn right
Turn left | turn right
Turn left | turn right
Turn left | turn right
Turn left | turn right
Turn left | turn right
Turn right
.