1. Reserve a certain expansion space appropriately, so as to increase or decrease equipment when replacing products;
2. When arranging the equipment, pay attention to setting the lifting device to make full preparations for equipment maintenance, disassembly and moving position;
3. Carefully consider the possibility of interchangeable use of the same or similar equipment, and arrange the same equipment or equipment with similar operation steps in the same area as far as possible, which can reduce the work of mobile equipment;
4. In order to facilitate the reorganization of the production line and the adjustment and movement of the equipment in the future, when the equipment passes through the hole in the floor or operation platform, try to reserve a suitable space according to the size design of the largest equipment, and calculate the concentrated load according to the weight of the largest equipment;
5. In order to facilitate the entry and exit of large equipment, the transportation route and installation mode of the equipment should be considered when arranging the equipment, and lifting access doors should be set on the external walls of each floor.
Mainly pay attention to these aspects, but I suggest that you can consult CEIDI Sidi if necessary. They have more than 10 years of experience in laboratory decoration design and have done many successful cases, and they know this. I'm glad to answer your question. Give me a big compliment.