What are the methods of use and precautions for constant temperature incubator?

Use of operating methods

⒈ ⒈ operators need to carefully read the instructions, understand, familiar with the function of the incubator before turning on the power.

⒉ Turn on the power, press the power switch, then the power indicator light.

3. Adjust the temperature controller to the user's desired set temperature (this value should be higher than the room temperature plus 50C).

⒋ When the incubator display temperature reaches the set temperature, heating interruption, heating indicator off, in the standard ambient temperature after 90 minutes of power, the temperature can be kept stable, such as the box instant temperature exceeds the upper limit of the set alarm temperature (factory settings for 5 ℃) temperature controller temperature tracking alarm indicator light, and automatically cut off the power supply of the heater.

Cautionary note: If you open the glass door to take samples, the heater and circulating fan will stop working, when the glass door is closed, the heater and the fan can operate normally, so as to avoid contamination of cultures and overshooting of the temperature phenomenon.

Precautions and maintenance

⒈ instrument should not be used in high-voltage, high-current, strong magnetic field conditions, so as not to interfere with the temperature controller and the risk of electric shock.

⒉ Plating parts and surface finishes, should always be kept clean, such as long-term use, should be coated with neutral grease or petroleum jelly on the plating to prevent corrosion, the incubator outside the set of good plastic film dust cover will be placed in a dry room incubator to avoid moisture damage to the temperature control instrument.

3. This product has been strictly debugged before leaving the factory, the temperature control instrument menu set data, do not modify.

Sung the incubator shell must be effectively grounded to ensure the safety of use.

Please be careful not to place flammable or explosive materials in the incubator.

Careful not to place high acid and high alkali items to prevent the box from corrosion.