What are the requirements for the installation of electrical wiring in the room

1, indoor daily appliances of the power line, should be equipped with isolation appliances and short circuit, overload and ground fault protection of electricity. 2, mobile daily appliances socket line, should be equipped with isolation appliances and short circuit, overload and leakage protection of electrical appliances. 3, socket calculated load: known applicable equipment according to its rated power; unknown use of the equipment, each outlet according to the 100w. 4, socket rated current: known applicable equipment, should be greater than 1.25 times the rated current of the equipment; unknown applicable equipment should not be less than 5A. 5, socket line current carrying capacity: known use of equipment, should be greater than 1.25 times the rated current of the equipment; unknown applicable equipment should not be less than 5A. Applicable equipment, should be greater than 1.25 times the rated current of the equipment; unknown applicable equipment, should not be less than 5A. 5, the socket line current-carrying capacity: the known use of equipment socket power supply, should be greater than the rated current of the socket; unknown applicable equipment socket power supply, should be greater than the total calculated load current. 6, need to be connected to the grounding wire with the grounding of the day-to-day electrical appliances of the socket must be with the grounding holes. 7, for the plug and unplug 7, for plugging and unplugging of daily appliances with a high risk of electric shock, it is appropriate to use a switch to cut off the power supply of the socket. 8, in the wet place, should be used to seal or protect the type of socket, the installation height from the ground should not be less than 1.5m. 9, indoor sockets, if the installation height of 1.8m from the ground and above, can be used in the general type of sockets; less than 1.8m, it should be used in the safety type of sockets.