Two, gong machine, this is a tool that can be held in the hand, like a pen as convenient, but its speed is consistent. Third, the electronic machine, this object is also hand-held, is also very convenient, and its rotation speed can be adjusted, you can polish the fine parts of jade. Third, the Suzhou horizontal car.
The dental machine, the dental machine was borrowed by jade cutters from the dentist's medical equipment, and its flexibility is by far the best of all models, so it is mainly used for detailing, and has little application in rough and heavy work.
Carving machines are distinguished by the size and power of their carving motors. In the processing of large jade, choose high power to meet the demand. And for small handicrafts carving choose small power motor is more profitable. Pay attention to the adjustable speed range of the carving head motor.
Towel: the first to protect the goods; the second to prevent the movement of jade. Sponge: used to absorb water and see the degree of rubbing. Iron sand board: used to grind the sand bar. Table lamp: is to see the polishing details more clearly and carefully. Jade jadeite carving and polishing methods a common 3 polishing methods using a hanging mill polishing.
This kind of small ceiling fan then socks start must be the kind of situation you said, such as Song stare Dan if you fixed its shaft, then the ceiling fan immediately burned wild disturbance. It is a synchronous motor. If if you start, turn still slow should be bad. Either the coil is burned or the shaft is bad.
Jadeite: reflective luster presented by the hard glassy luster, luster reveals a cold chill, so it is called the cold heart of jade. Gloss different jade: the surface presents a strong and weak inconsistent grease luster, the luster is soft, warm, so people understand the warmth of the jade.
Jade ring how to carve, using what kind of equipment.
1, the first carving tool: iron dao weight is the name of an ancient tool, refers to the rotating use of a variety of round carving tools. Mainly using steel material most, so also called iron weight.
2, lightening: generally large and powerful factories have this process, the use of special tools and materials, in front of the carving process excess scars and "sand" grinding and smoothing, for the next grinding and polishing process to lay a good foundation.
3, ancient stone stool carving jadeite finished. As shown in the carving with the foot, and then the hand constantly to the knife mouth to put the jade sand, this carving process is very slow, often take years to complete a piece of work.
4, ancient carved jadeite jade is cut with a special line: natural jade are not regular, the very beginning, people made use of the rope. This inspiration may come from the friction fire at that time, repeatedly rubbing the rope against the jade stone to make it heat up and then rupture.
5, is carved into the surface of the carving material to form a depression, so that the text or pattern concave in the hook edge under the lower than the plane of the material is a carving technique, relying on skillful and accurate techniques, so that the lines have the effect of rise and fall and staccato, depth. Internal Carving. Internal carving is a jade carving technique that goes deep into the interior of the jade material to carve out round and relief shapes.
Full-automatic CNC jade carving machine can carve jadeiteIn general, the jade carving machine jade carving machine application in our life, production can be seen everywhere, science and technology to witness the quality, which leads the fully automated machinery industry continues to progress forward.
, carving jade tools are mainly carving machine, electric drill, polishing machine and wax pot. 2, the basic process is first of all the jadeite with a chainsaw to cut out the embryo, square or garden shape. 3, the carver and then by virtue of the appearance of the jade carving the need to draw lines, and then put it into the carving machine.
Yes, you have this jade carving machine, can carve silver, gold, copper.
Polishing powder: polishing powder is specially used to polish jade and jadeite products, commonly used for iron oxide, oxide knot, aluminum oxide polishing powder, natural diamond powder. According to the actual situation and the use of different kinds of polishing powder. CNC engraving machine: the general market existing electric jade engraving machine.
Computerized jade carving machine than CNC jade carving machine operation is complex, covers a larger area, so the processing requires a lot of space. CNC jade carving machine is a handle control, the computer in the jade carving machine functions in the handle are available, the equivalent is to say that the computer needs to control the function of the jade carving machine centralized and optimized in a handle up.
Tailor-made design, to design a perfect subject for the jade, suitable design to make a piece of material to achieve the most beautiful realm, according to the material ShiYi. After the design is good, you can start carving, chopping large, with a jade carving machine to polish the basic shape of the carving subject.
jadeite with what carving jadeite how to use what carving1, relief carving is one of the more commonly used method of jadeite carving, is a semi-stereoscopic carving presentation, in the surface of the jade material carving raised patterns or shapes to show the pattern of three-dimensionality and spatiality, usually just compressed thickness, for the length and width of the bearing to maintain the original proportionality of the relationship to the performance of the artistic image.
2, relief. The spatial structure of relief can be three-dimensional three-dimensional form, can also have some kind of plane form; can be attached to some kind of carrier, but also relatively independent of the existence. Relief and round carving of the difference, is that it is relatively flat and three-dimensional.
3,, carving jade tools are mainly carving machine, drill, polishing machine and wax pot. 2, the basic process is the first jadeite with a chainsaw to cut out the embryo, square or garden. 3, the carver and then with the look of jade carving needs to draw lines, and then put into the carving machine.
4, the perspective carving is concerned about carving, hollowing, hollowing, deliberately remove the image of the virtual body outside the part, so that the formation of the object transparent, dynamic sense of space. Translucent carving process, so that the carving image is clear, and the combination of emerald, more exquisite, translucent effect.