How to layout a poster in ps? How to make a poster in ps

How to make a poster in psWhether it is a poster or any other form of graphic work, its resolution can be changed in PS through settings. To make a poster, the most basic thing is the composition. First think of the layout, the size. The average poster to be printed requires a resolution of 300 pixels per inch. If only on the computer only 72. To print the color mode to CMYK, the computer displays the A with RGB mode. Size set to 800X600 to start drawing, of course, depending on the situation can change the canvas size. Do complex posters remember to save often. Because a poster PSD file size is often dozens of M, temporary files will consume a lot of memory. Conceptualize and then go online to find materials. Unless the professionals will draw their own (images are also copyrighted), according to personal preferences to create their own poster. Posters are usually saved as JPG images. If it's for commercial use, you need to know how high of a printing resolution you need for the poster that's going to be printed. For example, sometimes some **** airbrushes only need a resolution of around 50. While some printing requires a resolution of 300 or more, the higher the resolution will cause the file to take up more space in terms of volume. Of course, it all depends on the situation. If you are doing a poster on regular same class paper. I suggest that your resolution is 300. in addition, the resolution of the material picture should not be too low, otherwise it will be blurred and unclear after stretching. The way to set the specific settings is to create a new - file and then change on the resolution column. You can also change the file has been opened by right-clicking on the top of the file frame, select the resolution column, enter the corresponding resolution figures. (First of all, in the drawing size, the length and width values are set to the actual length and width of your poster, for example, you want to type A1 size poster, then set the length and width of 841 × 594mm (can be slightly larger). Then, in the resolution is set to 100dpi if your computer speed, memory and video memory, set 120dpi is better, if not fast enough, and you have to change the picture many times to fix the picture, set 80dpi is fine, try to use some vector graphics, vector lace, etc., the effect is very good. Then add the design part, try the color gradient and embossed effect, and then try the font of the poster, such as the seal font, or your own design. In addition, the poster must highlight the "point" of consciousness, so that people feel eye-catching and attractive. How to use PS to create a poster tutorial

Now do e-commerce often have to do a poster to promote the goods, the following is a simple example to give you a reference to teach you how to use PS to make their own posters.

Tools/Materials

PScs6

First of all, open the PS software, click the File menu, click the New command. In the pop-up New dialog box, enter the width and height of the poster, and then click OK.

Built a good file, the first thing you need to design a background, you can use the Sogou browser to search for some beautiful background image to put in. Or their own color with the color of a color background image. For example, click on the gradient tool, select a gradient color at the top, click on the linear gradient, pull out from left to right in the document.

After the background is done, then find the image of the item you want to include and pull it into the document. As shown.

After the image is pulled in, pull against the control point to change the size, and then double-click the center to make sure.

Then click on the Quick Selection Tool, the goods such as the model in the picture selected, and then press Ctrl + Shift + I to inverse the background next to the model.

Press Delete to delete the extra background, and use the Move tool to move the model to where you want to place it, such as the left side. In the same way make a second model or item and place it on the right side.

Next, click on the Horizontal Text Tool or the Vertical Text Tool and click in the middle of the document to enter the text you want to promote. Then click on the right side of the character panel, adjusted to the preferred font, and size such as 60, line spacing such as 30, color, etc.. This is a simple poster is done, you can use your imagination, and then add other materials and text.

Finally click on the file menu, store as, format at the choice of JPEG, enter the file name, click save on it.

How to make a poster with ps

Photoshop referred to as PS, is a powerful, extremely widely used image processing software. It is not only the production of graphics, the creation of artistic characters, but also can be restored to the picture, poster and advertising design, production of a variety of brilliant and fantastic artistic effects. The following tutorial is to use ps to do a poster, but also a photo to poster yo. Follow me to understand it!

PS to create a photo to poster effect

Final effect

Tools/Materials

Computer

photoshop software

Subject

Steps/Methods

One, open the effect of a poster needs to be converted into a photo material, the implementation of the CTRL + ALT + ~! highlight selection, and then the implementation of the inverse selection, and the implementation of CTRL + J to copy the content of the selection, the copy of the layer's blending mode is set to Filtered Color.

Two, in order to further brighten the material photo, we then copy the previous step to copy the layer.

three, a new layer, the implementation of CTRL + ALT + SHIFT + E stamp visible layer, and then add a mask to the stamped layer, and then the layer 1 and the copy of the layer to hide, and then use the black brush tool in the layer mask state of the characters and the sky to paint

four, click on the layer board below the "Create New Click on the layer panel below the "Create a new fill or adjustment layer" button, select the creation of color balance adjustment layer, in the middle of the tone under the color gradient is set to -29, 0, -19; and then use the Black Brush tool in the mask of the characters stand on the ground painted out

fifth, and then create a hue / saturation adjustment layer, in the blue state of the parameters are set to -28, -23, 0. Used to change the color of the sky, because the color of the sky, because of the color of the sky, and then use the Black Brush tool in the state of the characters to paint out the sky. sky color, because the sky color saturation is high

fifth, to create a curve adjustment layer, brighten the picture of the photo, and then use the black brush tool in the mask to the characters and the photo of the surrounding painted out, the formation of dark corners of the effect.

seven, a new and stamped layer, the implementation of Filter - Render - Light Effects, and then Wang Cusu layer mask, using the black brush tool to paint the area does not need to carry out the lighting effect.

eight, create a new layer, set the mode of the layer as a positive film overlay, and then pull out a radial gradient, and then add a mask, use the black brush tool to paint out the places that do not need to be clear.

nine, the eighth step in the creation of that layer to make a copy of the dark corners of the effect of enhancement

ten, to create a brightness/contrast adjustment layer, brightness for -14, contrast for +5.

eleven, a new and stamped layer, the use of external filter TOPAZ to sharpen the image, and then use the blurring tool to make the sky blurred a little. To lighten the picture highlights and lighten the sky noise

twelve, new and stamped layer, the implementation of Image - Adjustments - Auto Color, and then the implementation of Edit - Gradient Processing

thirteen, to create a color level adjustment layer to further enhance the contrast, enter the color level for the 25, 1.25, 250. to continue to enhance the contrast effect of the picture

Find business services on the piggyback.com Delivery is guaranteed acceptance before payment