Center Positioning
Guizhou Engineering and Technology Research Center for Comprehensive Utilization of Industrial Solid Waste, with the principle of "reduction, reuse and resource utilization" and the basic characteristics of low consumption, low emission and high efficiency, is a model of economic growth in line with the concept of sustainable development, which is a response to the "mass production, mass consumption and mass waste", and is the first step towards the "mass production, mass consumption and mass waste". Circular economy, in line with the concept of sustainable development economic growth model, is the "mass production, mass consumption, mass waste" of the traditional growth model of change, an effective way to radically reduce environmental pollution, is to improve economic efficiency is an important measure, is people-oriented, to achieve the essence of sustainable development requirements. To this end, the main task of the Engineering and Technology Research Center is to study the comprehensive utilization of industrial solid waste, all kinds of waste accumulation of industrial solid waste through the "Technology Research Center" research, testing, development, transformation of results, to provide enterprises with the comprehensive utilization of waste resources to carry out the technical support.
Composition structure
The "Technology Research Center" consists of management expert committee, technical expert committee, comprehensive office, research and development department, results transformation department, testing and experiment center and information exchange center. (1) Comprehensive Office: responsible for dealing with the daily affairs of the center. (2) R&D Department: R&D team for comprehensive utilization of industrial wastes and energy-saving technologies and equipment for building materials. (3) Detection and Experiment Center: 6 professional laboratories. (4) Results Transformation Department: Pilot test and results transformation and engineering of industrial waste. There are 7 pilot test production lines in the R&D base. (5) Information Exchange Center: (Guizhou Solid Waste Network).
Method of formation of the center
Based on Guizhou Building Materials Science Research and Design Institute, the center takes advantage of the existing scientific research conditions, talents and other comprehensive advantages and basic conditions, and makes use of the unit to provide administrative support and logistical services and other convenient conditions. The Management Expert Committee is responsible for formulating the development plan and strategy of the Technical Research Center, guiding the construction of institutions, the introduction of talents, and the cooperation and development between industries and enterprises. The main duties of the technical expert committee are to consider the scientific research and development work plan of the engineering and technology research center, evaluate the engineering test program, and provide technical and economic consultation and market information. The "Technology Research Center" is a second-level legal entity, implementing the director's responsibility system, establishing a special account, and implementing independent accounting and self-financing. It has one director and three deputy directors. Its main responsibilities are: to be fully responsible for the "center" of the day-to-day affairs and operational management.
Overview of the undertaking unit
Guizhou Building Materials Research and Design Institute was founded in 1958, is a set of building materials and industrial waste utilization of scientific research, product development, engineering consulting and design, civil construction engineering design, urban planning, product quality supervision and inspection of the industry, the industry's information network and technical services for the integration of state-owned research and design units. Now under the leadership of the Guizhou Provincial Economic and Information Technology Commission, in 2009 the industry product quality supervision and inspection functions assigned to the provincial quality supervision bureau. Guizhou Building Materials Science Research and Design Institute is located in Nanming District, Guiyang City, Shachong South Road, No. 13, covers an area of 26 acres, with offices, scientific research and production of nearly 10,000 square meters, assets of 12 million yuan. Guizhou Industrial Waste Comprehensive Utilization R & D and Testing Center, consulting and design branch, R & D base (pilot plant), the party office, the Office of the hospital, the General Engineering Office, and service centers and other institutions and departments. The total number of registered employees in the hospital is now 112 people, including: 4 applied researchers in engineering and technology, 14 people in various senior positions, 25 people in intermediate positions, 38 people in junior positions, accounting for 72.3% of the total number of registered employees; with the national registered construction, structural, consulting, supervision engineers **** 15 people. Guizhou Building Materials Science Research and Design Institute now holds Class A Building Materials Industry (New Building Materials) issued by the Ministry of Construction, Class B Engineering Design Certificate of Building Materials Industry (Civil Buildings, Industrial Buildings and Structures) issued by Guizhou Provincial Department of Construction, Qualified Certificate of Comprehensive Quality Management of Engineering Survey and Design Units; and Qualified Certificate of Class A Engineering Consultation issued by the National Development and Reform Commission. Over the years, Guizhou Building Materials Science Research and Design Institute has made important contributions to the development of building materials industry and comprehensive utilization of industrial waste in Guizhou Province. The institute has completed 120 scientific research projects, of which more than 20 have won the Provincial Science and Technology Progress Award. Many scientific and technological achievements have been carefully designed to enter the market promotion into productive forces, creating good economic benefits for enterprises, especially the roller machine and many other machinery and equipment research and development results have been adopted by more than 100 domestic enterprises and applied to the production of the 90's after the completion of the various types of engineering consulting and design projects more than 300, of which: won the first prize of excellent engineering design in Guizhou Province 2, the second prize of 2. 3 third prize, won the Guizhou Provincial Excellent Engineering Design Award, the third prize, Three third prize, won the third prize of Guizhou Province excellent engineering consulting achievements 2, there are several 1000 t / d, 1500 t / d, 2000 t / d, 2500 t / d, such as new dry kiln cement production line; dozens of annual output of 4000, 6000, 12,000,000 standard bricks, such as the new wall material production line has been built to meet the standards, production, in the domestic industry enjoys a higher visibility. In recent years, Guizhou Building Materials Research and Design Institute has put forward the development strategy of "taking technological innovation and product development as the leader, joint development with enterprises to broaden the market, and talent training and talent introduction as the backing, so as to stimulate the Guizhou Building Materials Research and Design Institute of scientific research, design and quality inspection work". The core content of this strategy is: adhere to the road of technological innovation and product development, especially increase the research and development of products, equipment and technology with independent intellectual property rights and core technology, so as to make our scientific research and design work on a new level; at the same time, give full play to the strengths of Guizhou Provincial Building Materials Scientific Research and Design Institute in the traditional fields and industries, take the strategy of market development and infrastructure, so that scientific research, design and quality inspection work to achieve a new level. The research, design and quality inspection work will realize a new breakthrough. After the improvement of scientific research infrastructure, Guizhou Provincial Building Materials Research and Design Institute and timely adjustment of policies to strengthen the construction of scientific research team, technical backbone drawn from various departments to form a specialized research team, while the new 7 master's degree students to supplement, while sending 3 on-the-job scientific research backbone to study for a master's degree in engineering, by the hospital to assume the salary and provide supporting scientific research funds. 2009 Guizhou Provincial Building Materials Research and Design Institute, after the 2008 56% in the province and the industry's advantages. Research and Design Institute in 2008 in the province's 56 provincial research institutes to declare the second place in the competition to obtain the Provincial Science and Technology Department 4 million yuan innovation capacity building (platform construction) support, 2009 and won the Provincial Science and Technology Department of the innovation capacity of the team construction of special funds to support the construction of construction for the construction of building materials research and design institute of Guizhou Province to realize the rapid development of the whole institute's economic strategy to product development as a leading drive and a step forward again. The strategy has taken a step forward and laid a solid foundation.
Scientific research platform construction
Guizhou Academy of Building Materials Science Research and Design in the past few years due to the importance of scientific research platform construction, is the provincial research institutes in the scientific research funding investment in one of the largest institutions. In 2006, the development of "scientific and technological innovation capacity building development plan", according to "planning" building materials put forward the construction of "Guizhou Province, the comprehensive utilization of industrial waste R & D testing platform project", plans to build six professional research and testing laboratories, a research and development base, an information exchange center. 2007 March Guizhou Building Materials Institute officially Guizhou Provincial Building Materials Institute was formally established in March 2007, the comprehensive utilization of industrial waste R & D testing center in Guizhou Province. It focuses on solving the scale comprehensive utilization of industrial wastes such as fly ash, coal gangue, phosphorus slag, phosphogypsum, sulfur gypsum, gold tailings, calcium carbide slag, red mud and manganese slag, etc., which are urgently needed for the economic and social development of Guizhou Province, to improve the comprehensive utilization of wastes and the level of utilization, to improve the environment, and to promote the development of the recycling economy in our province and the development of the sustainable strategy. With the strong support of the provincial Economic and Information Commission, the provincial Development and Reform Commission and the provincial Department of Science and Technology, and an investment of eight million yuan, after nearly four years of hard work, Guizhou Provincial Building Materials Institute has now basically built six professional laboratories, such as the building energy saving research and testing room, material radioactivity research and testing laboratories, material petrographic analysis and research laboratory, physical and chemical performance research and testing room, concrete and products testing and research room, and milling laboratories. In June 2011, the seven pilot lines of the R&D base, i.e., fly ash ceramic granule test line, vibration molding block test line, static pressure molding brick test line, wet plastic molding sintered brick test line, frying powder test line, annual output of 2,000 tons of compounding pilot test line and annual output of 2,000 tons of cement grinding aids pilot test line, were all completed. Guizhou Building Materials Institute built Guizhou bulk solid waste network exchange service platform (Guizhou Solid Waste Network) for the Provincial Economic and Information Commission to publicize, publish, relevant policies, exchange various information, strengthen close contact with associations and relevant websites inside and outside the province, provide various services for the society, enterprises and scientific research units, and at the same time, set up a database of bulk industrial solid waste. In August 2010, Guizhou Province Building Materials Institute 2600 square meters of R & D building groundbreaking, scheduled for completion in April 2011, the laboratory will be completed after the completion of all the scientific and technological innovation will greatly enhance the Guizhou Province Building Materials Institute and the comprehensive utilization of industrial waste development capacity.
Research Direction
To carry out research on Guizhou Province bulk solid waste fly ash, phosphogypsum, desulfurization gypsum, phosphorus slag, red mud, calcium carbide slag, coal gangue, ferroalloy slag, manganese slag, sulfuric acid slag, barium slag, magnesium slag, gold tailings, and other research, the production of energy-saving, heat preservation, low-carbon new building materials products and production process technology research and promotion. Focus on: 1, the use of red mud production of ceramic granules, road turn, square bricks and other research; 2, the use of electrolytic manganese slag and sintered manganese slag research lightweight, energy saving, heat preservation wall materials; 3, the use of phosphorus slag, phosphorus gypsum, desulfurization gypsum preparation of self-insulating blocks composite wall research; 4, is the use of heavy slag from the blast furnace production of new building materials and industrialization of the key technology research; 5, the use of gold tailings to develop the production of new building energy-saving wall materials and industrialization of key technology research; 5, the use of gold tailings development and production of new building energy-saving wall materials. Materials and industrialization of key technology research; 6, the use of mercury slag development and production of new building energy-saving wall materials and industrialization of key technology research; 7, the use of lead-zinc slag development and production of new building energy-saving wall materials and industrialization of key technology research; 8, the use of municipal garbage and sludge development and production of new building energy-saving wall materials and industrialization of key technology research.