Easy xt headlight bulb exploded to remove, unplug the bulb's power socket, unplug the power connector, remove the waterproof cover at the back of the bulb, remove the bulb from the reflector. Place the new bulb into the reflector, align the fixed snap of the bulb, pinch the two sides of the steel wire card spring and push inward to fix the new bulb in the reflector. Close the waterproof cover and plug the bulb into the power supply.
Elite headlight replacement bulb notes
1, before replacing the headlight bulb, in order to avoid being burned by the engine compartment components when replacing the bulb, make sure the vehicle has been turned off and is in a cool state, open the hood. Gloves should be worn during replacement to protect your hands and to facilitate the operation. Unplug the bulb from the power socket. After unplugging the power socket, remove the waterproof cover from the back of the bulb. Remove the bulb from the reflector.
2. Regarding the replacement of headlight bulbs, when picking a new bulb, owners should choose the right product based on the model of their original bulb. The Escape uses a dual-light lens, the far and near light is a light issued by the H7 interface 55W, the far light auxiliary H8 interface 35W, the indicator light T10 interface.
3, when installing the bulb, fingers do not directly touch the bulb glass body. This is because there is gas inside the bulb, even a tiny bit of finger oil stains adhering to the glass body, will shorten the life of the bulb, long-term use may be the risk of bursting.