I hope my Jane can help you and wish you success! Happy ~ ~
Question 2: How to install the home monitoring system? Step 1: decide whether PC+ acquisition card or DVR is your host;
Advantages of using PC+ acquisition card: you can make full use of the original home computers in the factory (the configuration meets the requirements of the board), and each monitoring card has the same requirements for the PC system, so it is best to use INTEL.
P4 CPU and chipset, this computer can also be used for general purpose. The disadvantage is that video files need a lot of hard disk space. If you need long-term application, you need to use professional digital hard disk video recorder.
Digital hard disk video recorder: Compared with the traditional analog video recorder, hard disk video recorder has great advantages, which are as follows: the recording time is long, and the longest recording time depends on the capacity of the connected storage device, which can generally reach hundreds of hours; There are many video and audio channels supported, and several, dozens or even dozens of channels can be recorded at the same time; The quality of recorded images will not decrease with the passage of time; It has more functions, unlike traditional analog video recorders. Different application fields have different functional requirements for hard disk video recorders. For example, the hard disk video recorder used in the monitoring industry should have the following functions: compression function, video recording function, playback function, backup function, network function, pan/tilt and lens control function, alarm input and output. Hard disk video recorders designed and produced by different manufacturers may not have all the above functions.
Step 2: Decide how many cameras are needed and determine the image quality of the cameras.
According to the specific situation of each monitoring point, determine the quality requirements of each monitoring camera and determine the number of cameras in the home monitoring system.
Step 3: Do you want to have night vision? There are many kinds of cameras for monitoring, which are dazzling. Determine the illuminance (brightness) of the monitoring site and whether it is necessary to monitor at night. If the environmental brightness of a monitoring point is low, or it needs to be monitored at night, it is necessary to identify the camera of this monitoring point as an infrared camera. If you don't need night vision, please choose a normal camera. If special functions (such as rotation) are required.
Please select other cameras that you approve for pan/tilt and zoom lenses. )
Step 4: Wired or wireless?
In addition to the high price, wireless network does save the trouble and ugliness of camera cable, but we need to pay attention to the problems of distance and obstacles. In principle, cement building materials will shorten the wireless transmission distance, while metal materials will completely shield wireless signals. The transmitter (on the camera side) and receiver (on the host side) should be separated from other electrical appliances to avoid interference. If you want to use the wireless network, but you are not sure, you can also contact the engineering company.
It should be noted that you must accurately measure the distance between each camera and the host.
Step 5: The function and price of the camera
If you still have doubts and can't decide, then you need to know your own needs, such as the desired image quality, night light, shooting distance, etc., so you can choose the right camera according to these factors.
Question 3: How to install and use remote monitoring? There is an online person, you can try.
Question 4: How to install the monitoring equipment list by yourself:
1, front-end equipment
Infrared camera (or infrared hemisphere), bracket, camera power supply
2. Video storage devices
Hard disk video recorder (DVR), hard disk (5.3G per channel in CIF format and 2 1G per channel in D 1 format).
3. Monitor
Display or monitor
4. Transmission equipment
Video cable, BNC connector, power cord, PVC pipe, etc.
5. If you need remote monitoring.
A computer and a router.
6. Schematic diagram
I hope this helps.
Please accept it if you are satisfied, thank you!
Question 5: What is needed for computer installation monitoring and how to do it? , a graphics card
camera
Video line
And the video software on the computer.
Question 6: How to install outdoor monitoring? Then you need to look at the structure of the monitoring.
Just display it, install the camera and wire it, including two power cables (DC 12V) and two video cables, and then go to your computer room. Power supply takes electricity (generally requires a small power supply), and the video cable can be connected to the display.
If you want to store it, it is video cable +DVR, that is, hard disk video recorder (which can be sized according to the number of cameras), and then connect the display.
If you want to connect a computer, you need to buy a video capture card (a bit like a network card). After installation, the computer will have a video head interface, plug in the video connector, install the software corresponding to the video capture card on the computer, and then display it.
Question 7: How to install the monitoring system of mobile phone monitoring system on mobile phone? Can't be installed on a mobile phone. That's the website of mobile phone login monitoring settings, mobile phone remote login.
Installation inspection
Turn on the cameras one by one for detection and coarse adjustment, and then install them after the cameras are in normal working condition;
Check the horizontal and vertical rotation angles of the tripod head, and aim at the rotation starting point direction of the tripod head according to the design requirements;
Check the fastening of the camera in the protective sleeve;
Check the installation dimensions of camera base and bracket or translation/tilt.
Do not open the lens cover while moving and erecting the camera.
The installation of the camera device should be firm and stable.
The cable from the camera should have a margin of 1m, which should not affect the rotation of the camera. The cable and power cord of the camera should be fixed, and the plug cannot bear the weight of the cable.
First of all, the camera is initially installed. After power-on and fine-tuning, check all functions and observe the coverage and image quality of the monitoring area. It can only be repaired if it meets the requirements.
Line laying
Cable laying shall meet the following requirements:
The bending radius of the cable shall be greater than 15 times of the cable diameter;
The power line shall be laid separately from the signal line and the control line;
Avoid cable connection when selecting cables;
When connecting cables, special connectors should be used.
Laying pipes and cables shall meet the following requirements:
Coat the cable with butter or talcum powder;
Lead skin should be padded between the nozzle and the cable, and the lead skin should be wrapped on the nozzle;
The cable entering the pipe hole should be kept straight, and measures should be taken to prevent moisture, corrosion and rats.
Question 8: How to install the monitoring driver? Obviously, the 4-channel video capture card is not driven, and then the monitoring software is installed. After entering the software, add the protocol and video strategy, and it will be OK. Ask me if you don't understand: 736720963.
Question 9: How to install monitoring at home? Let's talk about the monitor first:
1, if you have a computer, buy 1 video capture card, and ask for 4 or 8 cards according to your actual needs (at least the market is about 200).
2. If you don't have a computer and want to save money, buy a hard disk video recorder, which is also divided into 4 and 8 channels (the lowest market is about 600 without a hard disk)
Materials and equipment required for the project:
According to the specific requirements of construction, investment is divided into high and low levels.
Wire: 75-5 (slightly higher price) and 75-3 (slightly lower price); (Minimum 2 yuan/m);
Connector: BNC connector (minimum 1 yuan);
Cameras: ordinary cameras, infrared cameras, infrared high-definition cameras, infrared high-definition integrated machines, etc. (The minimum price increase is about 100 yuan);
Camera power supply: 12V camera power supply and central control power supply; (12V minimum about 20)
(The lowest price refers to the price when the quality is barely acceptable. If you buy at the lowest price, it is easy to have problems, especially wires and cameras. )
Accessories:
According to the specific requirements of construction,
Camera bracket, PVC conduit, PVC trunking, etc.
Architecture:
Pre-stage: wiring, monitoring point to the computer room, take the open wire? Or is it a dark line? Think about it first. Do you use PVC pipes for wiring? Do you use PVC trunking to enter the computer room? After wiring is completed, install the camera, camera power supply, weld BNC connector and connect all the equipment needed in the computer room.
Later: debug the angle and scope of the camera, and finally improve and beautify the computer room.