I. General provisions of Article 1 operators should understand the use of paint spraying equipment performance, principles and common knowledge of paint mixing. Article 2 paint spraying place should be well ventilated, the surrounding 5 meters are not allowed to use fire. Article 3 The operator must be able to use fire extinguishing equipment. Article 4 the use of tools and mechanical equipment, should be frequently checked to maintain good condition. Second, the operation of the preparation of Article 5 to check the air compressor pressure gauge, safety valve is sensitive and reliable, unqualified persons are prohibited from use. Article 6 prepare all kinds of tools and materials. Third, the operation of Article 7 when handling paint and solvent, should be gently held and put, no impact, to prevent accidents. Article 8 in the pouring barrel of gasoline, banana water, paint and other materials, must be isolated from the flame, after pouring, the container must be tightly covered in a timely manner. Article 9 When removing the rust, sludge and other dirt on the surface of the equipment, it is strictly prohibited to knock and shovel to prevent injuries to personnel and fingers. Article 10 in the spray paint, smoking is strictly prohibited, welding, gas cutting and open flame is not allowed. Article 11 equipment painting. The operator must wear a good mask, if long hair must wear a helmet. Fourth, finishing work Article 12 of the spray paint equipment should be placed in accordance with the provisions of the staff shall not affect the walking. Article 13 work is completed, sweep the workplace debris, maintain cleanliness and hygiene, confirm that the site is no hidden danger before leaving the work site.
More about the engineering/service/procurement category of the tender writing production, to enhance the winning rate, you can click on the bottom of the official website customer service free consultation:/#/?source=bdzd