For help, is there anyone who assembles a fiber laser marking machine themselves

In fact, you can find tutorials on the Internet, you can refer to the following suggestions: fiber laser marking machine using a fiber laser to produce laser marking machine, beam quality is good, widely used in integrated circuit chips, computer parts, industrial bearings, clocks and watches, electronic and communication products, aerospace devices, various automotive parts and so on. So what do you need to pay attention to when assembled?1, the mechanical part of the installation of the main considerations are mainly sheet metal and machined parts, machined parts of the connection between the firmness, of course, it is necessary to increase the spring spacers and shims of two things, to ensure that a certain degree of vibration under the screws will not be loose phenomenon occurs.

2, the installation of the electrical control section, the main considerations for the design of the control circuit to be reasonable, the electrical components of the box to have a certain degree of dust and moisture-proof function, pay attention to increase the sudden power outage after the automatic re-call, the equipment does not start the function. The shell of the machine is also completely connected to the earth.

3, the optical part of the installation of the main notes include the following items, the calibration of the red light must be completely accurate, the height of the module and the height of the optical axis must be the same, the red light focusing point must be adjusted to the position of the oscillation chamber of the two-fold the most appropriate, of course, the red light out of the light hole should be a little smaller for the better, when the adjustment of the first half-reflective mirror, the half-reflective mirror mirror frame should be locked can not be moved.