The Alfa Laval Alfie series of compact high-speed centrifuges for cutting fluid wastewater treatment equipment can quickly separate out the dirty oil, sludge and solid particles mixed into the cutting fluid to improve the cleanliness of the cutting fluid and ensure machining quality; and at the same time, prevent the wear and tear of the tools, reduce the amount of cutting fluid consumed, and lower the treatment cost. Reducing cutting fluid consumption and waste liquid generation from front-end management, recycling cutting fluid, significantly reducing disposal costs, and reducing the impact of waste liquid on the environment. Whether it is water-based cutting fluid or oil-based cutting fluid, there are corresponding solutions.
1. Cutting fluid wastewater treatment equipment water-based cutting fluid purification system
Alfie centrifuge system quickly separates multi-phase media by using centrifugal force 5,000 times stronger than gravity in conventional settling tanks, removes impurities from the separated cutting fluid, prevents tooling wear and tear, reduces consumption of cutting fluid replacements, and lowers disposal costs.
Alfie can be installed as a bypass while the machine is running, without interrupting the machining process, and without any modifications to the existing equipment prior to use.
Alfie All functions are controlled by a PLC-based control system. The system is fully automated and can be used by simply operating buttons according to the manual, in a simple and clear control interface.
Alfie 500 Cutting Fluid Purification Experiment
2. Cutting Fluid Wastewater Treatment Equipment Oil-Based Cutting Fluid Purification System
Alfa Laval's Emmie series of centrifuges is a mobile, hydraulic, oil-contaminated purging system that removes all free water and 99% of the 2-5μm particles from the oil, resulting in longer service life and system reliability.
Principle of operation
The oily water separation unit Emmie consists of a stainless steel trolley and a centrifugal separator with two towers, one for purification and the other for clarification. All components are built into the unit and can be easily moved around the workshop.
The clarifier model is ideally suited for applications where the oil is heavily contaminated with water, as it continuously removes water. Centrifugal force separates solids from the oil and conveys them outward for easy removal. Water is continuously discharged from the bottom of the unit. If there is only a trace amount of water in the oil, the clarifier mode will block the outlet. You can switch modes in minutes.