As a cleaning instrument, ultrasonic cleaning machine in use, need to pay attention to the aspects of very much, which is also a lot of machine a *** with the same characteristics, we can not decide which cleaning function, or which power cleaning effect is the best, but we can decide which maintenance method is the machine needs.
Ultrasonic cleaning machine daily attention
1. Use the power supply and power cord in line with the specifications of the equipment, the user side of the power supply circuit must be installed in the cleaning machine dedicated to the air switch in order to cut off the power supply of the cleaning machine in case of need.
The Division's production of cleaning machine body and generator will be equipped with a special power lead on the grounding wire, and there is a clear distinction between the characteristics of other wires, because the equipment and water, corrosive (swelling) liquid contact, easy to cause leakage, please connect the grounding wire according to safety requirements.
2. equipment using non-flammable detergent, do not use flammable and explosive substances as detergent, the use of equipment in the need to ensure that there are flammable and explosive substances away from the occasion, the user special circumstances necessitate the use of certain substances, you must contact the Division to confirm the safety, and make the appropriate safety measures;
3. no liquid or insufficient liquid in the cleaning tank will cause irreversible damage to the equipment, the use of the tank must ensure that the level is irreversible. The use of the tank must be sure to inject a sufficient amount of cleaning liquid, otherwise the related electric heaters, pumps, ultrasonic vibrators may be damaged and may lead to fire and personal injury;
4. Electrical control box and related electrical components, etc., pay attention not to splash into the water, and away from water vapor, corrosive gases, dust, etc.;
5. Equipment abnormalities, please contact us or stop the power supply in a timely manner. After the inspection by an experienced professional electrician;
6. To clean the workpiece, please use the legs of the wash basket or hanging device mounted hanging, placed in the tank to wash, prohibit the workpiece directly into the bottom of the tank to wash, otherwise it may cause damage to the workpiece and the bottom of the cylinder;
7. Equipment operation, there may be a high temperature, high pressure in the body of the electrical components, electrical components, electrical components, the surface of the transmission mechanism of the movement, Pressure sudden movement and other factors that may cause personal injury, work, please do not open the casing, so as not to operate under unprotected conditions;
8. equipment is not used for a long time, please put out the cleaning fluid, drying the inner groove and the surface of the film to protect the equipment in order to prevent corrosion and aging of the equipment to speed up;
Ultrasonic cleaner routine maintenance and maintenance
1. Keep the equipment workplace ventilation, dry, clean, conducive to the long-term efficient operation of the equipment and optimize the conditions of the working environment;
2. Cleaning fluid is too dirty should be dealt with in a timely manner, regularly clean the cleaning tank, the storage tank dirt, to keep the cleaning tank and the appearance of the clean tank can improve the durability of the cleaning tank;
3. Electrical control box and equipment vents away from water vapor, Corrosive gases, dust, regularly use compressed air to clean up the dust attached;
4. Regularly test the insulation of the equipment, for easy aging of the electrical components of the regular inspection, check the grounding wire, to ensure that the equipment is well grounded this project must be carried out by a professionally experienced electrician;
5. Regularly test the power supply to confirm that meets the equipment's power supply voltage requirements, to avoid excessive high or low unstable power supply under long-term work;
6. Stable power supply under long-term work;
6. With the filter device equipment, regular replacement of the filter cartridge;
7. With the transmission mechanism, should be required to regularly fill the grease, oil and other lubricants, regular replacement of gear oil reducer, to ensure that the movement of mechanical parts in a good lubrication conditions of work.