Zaozhuang City license fifteen years want to scrap to understand the vehicle scrapping process

Tools/materials

National vehicle scrapping standards latest adjustments

1, 9 (including 9) non-operating passenger cars (including sedans, including off-road type) used for 15 years. After reaching the end-of-life standards require continued use. Does not require approval, after passing the inspection can extend the life of the regular inspection 2 times a year, more than 20 years, from the 21st year 4 times a year from the regular inspection.

2, tourist passenger cars and non-operating passenger cars with more than 9 seats for 10 years. After reaching the end of the standard requires continued use of the current provisions of the procedure, but can extend the use of up to 10 years. Deferred scrapping of tourist passenger cars 4 times a year; deferred scrapping of non-operating passenger cars with more than 9 seats 2 times a year, more than 15 years, from the 16th year onwards, 4 times a year regular inspection.

3, the use of operating buses is adjusted to 10 years, after reaching the end of the standard requirements for continued use of the current provisions of the program. Deferred scrapping use no more than 4 years: extend the use of the period of regular inspection 4 times a year.

4, the above regular inspection of vehicles, an inspection cycle for three consecutive inspections. Inspection are not in line with national standards, "motor vehicle operational safety and technical conditions (GB7258-1997), the provisions of the recovery of the number plate and license plate, notify the owner of the motor vehicle for deregistration. After reaching the end of the standard, shall not be registered and transfer registration.

5, operating vehicles into non-operating vehicles and non-operating vehicles into operating vehicles are operating vehicles in accordance with the specified life (8 years) scrapped.

6, there is no adjustment of the content and other types of cars, still in accordance with the State Economic and Trade Commission and other departments "on the issuance of notice" (State Economic and Trade Commission [1997] No. 456) and "on the adjustment of light-duty trucks and cars on the notice of the end-of-life standards" (State Economic and Trade Commission [1998] No. 07) implementation (Note: light-duty trucks and cars refers to the factory set the total mass of more than 1.8 tons less than or equal to 6 tons of cargo). Automobile). Right steering wheel car scrapping management, in accordance with the Ministry of Public Security "on strengthening the management of the right steering wheel car notice" (bus management [2000] No. 183) implementation.

7, in accordance with the provisions of the delayed scrapping vehicles need to go through the approval procedures, still in accordance with the current provisions of the procedure; the original has been delayed scrapping procedures, but did not meet the new scrapping standards, according to the ordinary management of normal vehicles, re-printing of the license plate, and according to the provisions of the annual inspection of the seal, no longer stamped ting delayed scrapping inspection seal; in accordance with the original scrapping standards should be scrapped but did not complete the cancellation of the vehicle Registration of vehicles, in accordance with the new provisions of the implementation of the annual limit can continue to use motor vehicles.

Methods/Steps

Vehicle scrapping process

Mandatory scrapping standards for end-of-life vehicles

In the Ministry of Commerce's newly released "mandatory scrapping standards for motor vehicles (draft)," the mandatory scrapping of motor vehicles required: registered motor vehicles should be mandatory for one of the following circumstances, and the owner should be the motor vehicle sold to the End-of-life motor vehicle recycling and dismantling enterprises, by the end-of-life motor vehicle recycling and dismantling enterprises in accordance with the provisions of the registration, dismantling, destruction and other processing, and will be scrapped motor vehicle registration certificates, license plates, driving licenses to the public security organs of the traffic management department to be canceled:

(a) to reach the various types of motor vehicle serviceable life;

(b) the repair and adjustment still does not meet the national standards for motor vehicle safety and technology in the Use of the relevant requirements of the vehicle;

(C) after repair and adjustment or the use of control technology, the emission of pollutants into the atmosphere or noise still does not meet national standards on the requirements of the vehicle;

(D) in the expiration of the inspection period of three consecutive cycles of motor vehicle safety and technical inspection did not obtain the motor vehicle inspection mark.

Scrap car scrapping process

To reach the national mandatory scrapping standards of scrap car scrapping process is as follows:

1. motor vehicle owner with proof of identity, motor vehicle registration certificate, motor vehicle license, motor vehicle license plate to the motor vehicle dismantling plant operations to fill in the "motor vehicle stop, re-drive / deregistration application form," 2, to the license plate management post waiting for notification of the fee, collect License plate;

2, registration acceptance post application, the vehicle has reached the end-of-life issued a "notice of automobile scrapping". Motor vehicles that have not reached the end of life, the motor vehicle inspection post identified, in line with the automobile scrapping standards, the issuance of "automobile scrapping notice".

3. The owner of the vehicle will choose a recycling enterprise that meets the regulations to send the vehicle for dismantling.

4. The recycling enterprise will dismantle the vehicle and take photos after checking the Notification. Requirements for engine and vehicle separation, the engine block should be broken, the frame (chassis) to be cut.

5, the car hosts the "change table", "XX province update automobile technical appraisal form" and "end-of-life automobile recycling certificate" and the vehicle disintegration photographs, the motor vehicle inspection post check and sign, recycling license plate, according to the provisions of the approval of the report for the end-of-life registration.

The owner of the vehicle scrapping procedures need to prepare materials are as follows: 1, motor vehicle license; 2, motor vehicle registration certificate; 3, vehicle license plate; 4, unit vehicles stamped with the official seal of the organization code certificate (copy); 5, personal vehicle owners with their own identity cards; 6, accident vehicles to prove the material; 7, unit vehicles in the "motor vehicle cancellation Registration application form" and "scrapped car certificate" on the official seal (consistent with the license name), personal vehicle owner signature.

END

Precautions

Some drivers are reluctant to let their cars be scrapped when they reach the end of their useful life. This thinking is not correct. Vehicle scrapping not only maintains good road traffic safety order, but also for the owner's own safety considerations. All drivers should consciously abide by the relevant state laws and regulations, the vehicle scrapped on schedule.