1, all large-scale construction machinery and equipment to the field audit, audit its number, performance to meet the requirements of the project progress plan, verification of qualified to be signed. Large construction machinery withdrawal must be recognized by the supervision unit before withdrawal. 2, large construction machinery construction site must be strictly enforced a machine and a full-time protection, to achieve "five a" that is a person (full-time protection), a (mechanical construction log), a card (equipment identification plate), a certificate (mechanical operation certificate). 3, large construction machinery Installation and dismantling of large construction machinery, must be undertaken by the appropriate qualification units, the construction unit responsible for the safety and quality of the minister, the safety (equipment) engineer in charge must be present to check. 4, large construction machinery transfer, there should be a "special program, special testing, special witnesses, special inspection". The foundation bearing requirements must be site leveling, foundation bearing capacity to meet the requirements before proceeding. Large construction machinery at night shall not be arranged to transfer, move the machine. 5, all construction equipment and machinery must be used by a full-time staff responsible for inspection and maintenance to ensure that the condition is good. 6, large-scale construction machinery operators must be trained to pass the examination, and obtain the corresponding operation of the equipment operated by the operating license before going on duty to operate to put an end to the operation of unlicensed and unauthorized operation. 7, large-scale construction machinery, such as insurance, limit devices, protective indicators must be complete. Insurance, limiting device, protection indicator, etc. of large construction machinery must be complete and reliable. Driving, command staff must be licensed, must be required to operate according to safety regulations, and make a good record of the operation. 8, gantry crane, railcars and other special equipment, safety valves, pressure gauges, water tables, pressure regulators and other safety accessories must be sensitive and reliable, of which: safety valves calibrated at least once a year, the pressure gauge calibrated at least once every six months. 9, before the installation of gantry cranes must be installed in Ningbo City Quality and Technical Supervision for the installation of informational procedures; after installation, must be qualified by the Ningbo City, special equipment inspection agency; before use, must be Ningbo City, Quality and Technical Supervision for the use of the registration certificate before being put into use; put into use must be in the specified test cycle to the local special equipment inspection unit to apply for periodic inspection, more than the test cycle of the special equipment can not be used. 10, large-scale construction machinery, Before the use of special equipment, must be prepared to operate safely, posted in the obvious parts of the equipment, the construction unit should be regularly organized operators to learn the test. 11, large-scale construction machinery safety precautions (1) all kinds of safety (including braking) devices such as guards, covers, etc. to be complete and reliable. (2) machinery and transmission lines (vertical, horizontal) shall be in accordance with the provisions of the distance. (3) During operation, the machinery should be parked firmly, and the arm amplitude indicator should be sensitive and reliable. (4) The cable is well insulated, there shall be no joints, and it shall not be dragged and pulled indiscriminately. (5) Various types of machinery with technical performance plate and on-the-job operator list plate. (6) must be strict regular maintenance system, do a good job before, during and after the operation of equipment cleaning and lubrication, fastening, adjustment and corrosion. Strictly prohibit the use of mechanical equipment overload, with sick operation and maintenance in the operation of the operation. (7) All assembling and erecting operations focus on the insulation of electrical equipment, lifting and hoisting operations, and safety precautions for work at height. (8) Mechanical equipment night operations must have adequate lighting, night construction site to have good lighting equipment. The above is the content of the Zhongda Consulting collated
More about the engineering/service/procurement category of the tender writing production, to enhance the winning rate, you can click on the bottom of the official website customer service free consultation:/#/?source=bdzd