Comparison of the performance of various liposuction machines
Liposuction has a large market share and safer procedures than other plastic surgery procedures. Higher profits and greater returns. It accounts for the main item of the whole industry. Liposuction equipment varieties are complicated, so that shoppers do not know how to choose. According to the characteristics of various liposuction equipment for the following comparison, for the reference of buyers
1. ordinary negative pressure liposuction
Ordinary negative pressure liposuction, through the strong suction (high negative pressure), the fat will be sucked into the suction head, and then rely on the doctor's hand to reciprocate the pumping, will be pulled off the fat sucked out. Due to the high negative pressure, the nerves and blood vessels are sucked into the suction head and sucked out, so there is a lot of bleeding and damage. The doctor's operation is very laborious, and it is easy to cause incomplete liposuction. The doctor's back and forth pumping is tunneling, and it is very easy to cause unevenness in the operation area. Therefore, the liposuction effect is not good and there are many disputes. Due to the damage of blood vessels, fat soybean grain size, easy to cause tethering, poor safety. It is already an obsolete product.
2. Ultrasonic electronic liposuction
Liposuction equipment following the ordinary negative pressure, entered the era of ultrasound (in vivo and in vitro ultrasound). However, due to its handle heat production, liposuction requires two-step action, the first ultrasound emulsification, and then negative pressure to pump, the whole process is cumbersome and slow. The whole process is cumbersome and slow. After the Italian electronic liposuction into our country, it relies on two electrodes to produce a magnetic field, the fat cells will be broken, and then pumped out of the body with a 3mm suction tube. This equipment is basically not recognized due to its high price and slow speed.
The characteristics of ultrasound and electronic are mainly flat after surgery, but the speed is too slow. As a result, the clinic has reverted to the use of ordinary negative pressure, ultrasound and electronic as concepts used in advertising hype.
3. Imported **** vibration
Imported **** vibration is the fourth generation of liposuction equipment, which relies on the vibration of the vibration motor vibration will be broken fat, greatly reducing the physical labor of doctors. Low negative pressure suction trauma light, less bleeding. However, due to its built-in vibration motor, the handle is hot, the failure rate is high, and the whole handle cannot be sterilized by high temperature and high pressure; and there is electromagnetic radiation. In the process of liposuction, the speed is extremely slow, and has been basically eliminated in recent years. As the equipment was the only liposuction machine with import license at that time, and the price was high; therefore, the purchasing power was mostly concentrated in public hospitals; however, many hospitals purchased it because the speed was too slow, and the failure rate was high; the doctors were reluctant to use it, and they still used the ordinary negative pressure. Caused a great waste.
*** vibration liposuction weaknesses, due to its specific configuration, high vibration frequency, unidirectional vibration, crushing fat power is poor, although labor-saving but slow (slower than the ordinary negative pressure), many hospitals purchased, clinicians are reluctant to use, still use ordinary negative pressure.
4. Polymerized vibration wave liposuction
Polymerized vibration wave liposuction is the fifth generation of liposuction following the launch of *** vibration liposuction. It combines the strengths of *** vibration liposuction and avoids the shortcomings. In the negative pressure configuration, the imported oil-free negative pressure pump with international advanced level is adopted, which needs no refueling, low noise, small volume, high power and low failure rate. Five to ten years without maintenance.
Poly energy vibration wave in the vibration handle using pneumatic rather than electric, vibration frequency changed to low-frequency bidirectional. After expert research found that the vibration frequency in 600 times / min, amplitude 6mm vibration mode, the suction head crushing fat the strongest power. Because of its unique vibration (cyclotron pneumatic channel) way, the suction head in the body both forward and backward movement, and left and right movement, its movement in the body is not a reciprocating tunnel-type pumping, and the formation of a parallel movement trajectory. The fat is broken up quickly and evenly. Therefore, the postoperative area is very flat, no unevenness. The power of poly energy vibration wave to break the fat is strong, the purity of liposuction is high, the non-fat tissues such as nerves and blood vessels are effectively preserved, and the fat is in the form of surfeit, which is not easy to cause tethering. It is not easy to cause tethering.
Doctors in the operation with poly energy vibration wave and ordinary negative pressure at the same time surgery found that the same time, the amount of poly energy vibration wave suction than ordinary negative pressure more than 1/3, purity is higher than 1/3. 1000mm suction mixture with ordinary negative pressure liposuction, the water and fat is basically half of the water, half of the fat. Poly energy vibration wave liposuction water accounted for 1/3, pure fat accounted for 2/3.
International production of poly energy vibration wave liposuction machine only two, Belgium and sunshine in the sky medical equipment limited company, and the products in the performance, configuration are better than the Belgian products. And three certificates are complete. Belgium poly energy vibration wave, using the Korean oil negative pressure system, low configuration, short service life, high failure rate. Easy to oil leakage leakage phenomenon. And no access to China's registration. Now basically out of the Chinese market.
Autologous fat grafting system series
Autologous fat grafting filling surgery is a plastic and cosmetic medical professional organizations often use a surgical method, trauma is small, recovery is fast, the autologous fat plasticity is good, the postoperative period can be long-term retention of the body without sequelae, so the patient is psychologically easy to accept.
But the original surgical method is cumbersome and complex, fat cell purification and separation is more difficult, the operation of the exposure operation easy to cause fat contamination, artificial rinse purification, resulting in the separation of fat is not clean, the transplantation of fat into the body of the purity and effectiveness of the poor, so that the fat transplantation surgery has a low viability, the fat is easy to liquefy.
During the transplantation process, when the fat is transferred from the large syringe to the small syringe, the conversion back and forth causes the fat's secondary death and damage, and also results in the decrease of fat survival rate.
The pressure, flow rate and the method of selecting and purifying the fat when pumping the fat, the pressure, level and uniformity of pushing and transplanting the fat into the body have all become important factors in determining the fat grafting survival rate.
In view of the many disadvantages of the original fat grafting and the large milliliter syringe in the suction, push fat laborious, uneven and other problems. Based on the characteristics of fat grafting, our company has developed and produced the autologous fat grafting system after a large number of clinical experiments and expert argumentation and research. The system from suction, purification, to push injection, transplantation and other links, minimize the damage to the fat and damage, so that the whole process is more simple, convenient, greatly improve the survival rate of fat transplantation, shorten the operation time, will be injected into the liquid, fat suction, purification, injection as a whole, to fill the gaps in the technology of fat transplantation, but also in the international field of fat transplantation also has a leading level.
Autologous fat transplantation system, from fat suction, purification, injection and transplantation into the body of the whole process, completely in the sealed 20 ~ 60 ml conventional syringe to complete the operation, convenient for the operation of the doctor, simplify the surgical process, to ensure that the whole process of fat transplantation in a sealed and sterile environment, to avoid secondary pollution in the operation; suction of the fat through the centrifugal purification of the separation, effective After centrifugal purification and separation, the suctioned fat is effectively separated from water, bloody material and dead fat, which ensures the effective and pure fat grafting into the body, greatly improves the survival rate of fat grafting, reduces fat liquefaction and absorption, and avoids the drawbacks of repeated grafting and grafting failures in the original fat grafting surgery, which greatly improves the success rate of one-time fat grafting surgery.
The system adopts conventional syringes, and simulates the way doctors use syringes to pump manually in the body when pumping, with segmented pumping, even and stable, and precise control of the pumping pressure to ensure the activity of the fat; when injecting the fat into the body, the system can be set up for precise, slow, and large-dose pumping, etc. Using the precise injecting function, the required dose can be accurately and quantitatively controlled in the filler area; using the slow injecting function, the required dose can be accurately and quantitatively controlled in the filler area. With the precise injection function, it can accurately control the required dosage of the filled area; with the slow injection function, it helps the doctor to inject the fat into the transplanted area evenly and dispersedly when injecting the transplanted area backwards, which saves the effort of injection, fills in evenly, avoids the damage and death of the fat, and is more conducive to the survival of the fat, ensures the sufficient blood supply of the fat, and greatly improves the survival rate of the fat.
Multi-function fat transplantation system has all the functions of poly energy shock wave liposuction machine and fat transplantation machine, one machine can be used for multiple purposes, not only can be a large area of liposuction but also can do any part of the transplantation, full-featured, technologically advanced, and is the first choice for large-scale plastic surgery medical institutions and public hospitals.
Multifunctional fat and PRP stem cell purification centrifuge
I. Performance and principle
DT5-2 type multifunctional fat and PRP stem cell purification centrifuge can be used for fat purification and PRP purification; using 10ml, 20ml, 50ml, 60ml, 100ml. conventional syringes. Rapidly separating and purifying fat and PRP without heating and damaging fat and stem cells, it greatly guarantees the survival rate of fat transplantation and PRP transplantation, reduces the complicated process of transplantation surgery, and ensures the effective fat and fat survival rate in fat transplantation. After a lot of clinical research and tests, the machine has done a lot of research on centrifugal speed, time, centrifugal force, diameter, etc. to improve the survival rate of fat, and developed a multifunctional purification centrifuge specialized in fat transplantation and PRP transplantation, which improves the efficiency of the surgery, shortens the time of the surgery, and maximally improves the survival rate of fat and PRP in the surgery, and makes transplantation simple and convenient, and it is the preferred choice of the plastic surgeon It is the best assistant for plastic surgeons.
2. Function
1. Microcomputer control, high degree of automation, DC brushless motor, no carbon brush dust pollution.
2. Touch panel, digital display; foolproof design, easy and convenient operation.
3. Equipped with frequency conversion motor drive, smooth running, low noise, power saving, good purification effect.
4. Imbalance door cover self-locking protection function, can achieve a variety of alarms, early warning, safe and reliable.
5. A variety of models of sleeve configuration, capacity from 10ml-400ml optional, wide range of adaptability, easy to use, easy to use, dosage control.
6. According to the purification needs, can be displayed separately time, revolutions and the remaining time and rotational speed, timely grasp of the time to deposit the number of revolutions and other parameters. Flexible control.
7. Suitable for all specifications of conventional syringes, low cost of consumables, economical and convenient, can use conventional 10ml, 20ml, 30ml, 50ml, 60ml, 100ml syringes.