Anti-static floors are not very common in daily life. As we all know, their main uses are computer rooms or other communication rooms, radio control rooms, etc. Since these places have high environmental requirements, anti-static floors are Specifications and prices need to be strictly controlled. So everyone knows what the price of anti-static flooring is? Let's take a look at the price of anti-static flooring and how to choose anti-static flooring?
What is the price of anti-static flooring?
The price of anti-static flooring ranges from 100 to more than 300 yuan per square meter. It depends on the quality and grade you want. Generally, the quality of anti-static flooring that costs more than 200 yuan is already good. Anti-static self-leveling floors also cost tens to hundreds of dollars. Static floor is anti-static floor, also called dissipative static floor. Is a floor that enables charge to dissipate when it is grounded or connected to any lower potential point, characterized by a resistance between 1.0x105-109.
How to purchase anti-static floor
1. First of all, it is necessary to accurately determine the total area (or number of pieces) of anti-static floor and various accessories (standard proportions) required for computer room construction. 1:3.5, 1:5.5) quantity, and leave a margin to avoid waste or shortage.
2. Fully understand the varieties and quality of anti-static flooring produced by manufacturers, as well as various technical performance indicators. The technical performance of anti-static flooring mainly refers to its mechanical properties and electrical properties. Mechanical properties mainly consider its load-bearing capacity and wear resistance. Install the entire anti-static floor on the overlapping trusses. After the anti-static floor is leveled, its load-bearing capacity should reach a uniform load greater than 1000kg/m2. The concentrated load on any part of the anti-static floor should be greater than 300kg. The diameter of the anti-static floor should be greater than 300kg. When bearing a load of 300kg on a 6cm loading point, the deflection should be less than 2mm and there should be no permanent deformation.
3. The load of the anti-static floor should be determined based on the weight of the heaviest equipment among all the equipment in the computer room. This can prevent some equipment from being overweight and causing permanent deformation or damage to the floor.
4. Anti-static flooring is less affected by external environmental conditions. That is to say, there will be no obvious expansion or contraction due to excessively high or low external ambient temperature. That is, when the temperature of the computer room is slightly higher, the anti-static floor stretches and expands and cannot be removed and replaced; when the temperature is low, the anti-static floor shrinks, causing a loose feeling. The shrinkage amount of anti-static flooring affected by the environment should be less than 0.5mm, and the deflection amount of the board surface should be less than 0.25mm.
Anti-static flooring is the most common type. When choosing, everyone needs to know how to choose. The above is the price of anti-static flooring and the purchase method of anti-static flooring introduced by the editor today. This ends here.