How to extend the service life of large washing machinery and equipment?

Lubricants in the process of use, due to internal and external factors, physical and chemical changes will occur and deterioration. If you continue to use the equipment will cause corrosion or wear. Therefore, to timely replace the unqualified lubricant. 1. regular oil change according to the equipment lubrication icon required by the cycle of oil change is called regular oil change. Regular oil change is generally based on the actual running time of the oil change cycle, a variety of vehicles is to determine the mileage of the oil change cycle. Regular oil changes are convenient, but will undoubtedly change some of the still usable lubricants in advance. Regular oil change is generally used in equipment with high operating rate and small equipment with oil tank capacity below 25KG.2. Oil change according to quality is called oil change according to quality after identifying the state of oil quality of the equipment. According to the quality of oil change generally for more than 100L of large oil pool. First of all, the lubricating oil is regularly sampled and inspected, and the actual state of the oil is determined to change the oil immediately or deferred use. (10) sampling period generally according to the equipment developed by the oil change cycle 50-100h in advance to arrange for sampling. (2) oil quality inspection 1) conventional lubricant quality index test, should be checked, the project is the viscosity of the lubricant, moisture, acid value, mechanical impurities and water-soluble acid or alkali. 2) the use of oil quality rapid analysis instruments. (3) oil change standard (4) extended use lubricant extended use time is generally 300-500h. extend the period of application of lubricants, and then sampling time should be appropriate in advance. 3. equipment oil change of the division of labor lubrication centralized management of the enterprise's equipment oil change by the lubrication station is responsible for. Generally according to the plan to send oil to the machine, in the equipment operators to cooperate with the equipment cleaning, oil change. Lubrication hierarchical management of the enterprise's equipment oil change, generally by the equipment department to prepare the oil change plan, lubrication substation is responsible for the preparation of new oil and recycling of waste oil containers, equipment operators to cooperate with the equipment for cleaning and oil change. Large oil pool by the lubrication station personnel are responsible for sampling and inspection according to the plan, lubrication engineers in charge of the state of the oil quality according to the decision to change the oil or deferred use. Equipment cleaning and oil change is completed, the lubrication substation is responsible for filling out the "oil change operation completion acceptance form", in duplicate, a unit of self-storage, reported to the equipment management department.