In hospitals, there is a lot of medical equipment that needs to be installed scientifically. Although there are many ways to install these medical equipment, but some of them are not practical at all, they are only suitable for some places to install. Some friends want to know what is the correct method that can be used by everyone, it can be convenient so the doctors and patients to use. Here is the problem, I can provide a method for those who need it.
Hospital Wall Equipment Strip Interface
In order to extend the life of the hospital equipment strip, the beginning of the installation needs to be careful. Let's take a look at how equipment straps are installed.
Tools / raw materials: hospital equipment
Methods and steps to install the equipment:
1, the hospital equipment band is made of special materials, the quality must be very good, this can be assured. Must distinguish between strong electricity, weak electricity and gas pipe slots for internal needs.
2, ? In general, new or newly renovated hospitals first bury the pipe into the wall, and then install the equipment tape after the wall is finished putty; concrete or ordinary brick walls can be fixed by expansion bolts or steel nails.
Hospital wall equipment tape interface
3, ? Lightweight foam bricks are usually fixed with multiple expansion pins with higher density. When used, additional rooms can also be fixed more firmly. Walls are made of lightweight steel paste. Expansion of bolts for keel fixing or airplane. Back to back can also be dressed arrangement.
4. The belt width of hospital equipment is usually 180 to 230 mm. Regardless of the type of equipment belt, the lower edge of the installation height is about 1300?mm.
Hospital wall equipment belt interface
5, the matching function of the equipment installed in different rooms is different. According to the actual situation, there are other configurations in the operation and installation of the room.
6, each equipment strip is equipped with an oxygen regulator, a set of bedside light switches, a set of pagers and other functional equipment.
Hospital wall equipment strip interface
Above we briefly introduced the installation of medical equipment in hospitals now, you understand? If there is no scientific method of installation is not practical. Team hospitals are not only inconvenient and practical, but also cause great losses.