Preparation
1, installation tools: Phillips screwdriver
2, Note: Before installation, the first to remove the body of static electricity, such as touching the water pipes and other ground equipment;
Carefully and gently put the components, do not collide, especially the hard disk; the installation of the motherboard should be firm, and at the same time
prevent the deformation of the motherboard, or else it will damage the motherboard electronic circuitry.
3, adequate space for activities
Start loading and assembling the computer as follows:
1, the first step: is to open all the accessories and chassis.
2. The second step: is to install the CPU and CPU fan and place the memory modules in the appropriate slots.
3, Step 3 : Install the motherboard foot nuts first, then put the motherboard into the stable chassis to fix it.
4, the fourth step : is to lay out the cables according to the instructions.
5. Step 5 : It is to connect the power supply and complete the mainframe assembly.
6, Step 6 : Start to connect the main unit and monitor. First connect the VGA cable to the monitor and then fix the two screws on the back.
7, Step 7 : After fixing, connect the other end of the VGA cable to the computer host.
8, Step 8 : Connect the power cable to the monitor, the computer assembly process is basically complete.