1, install the device and confirm that the power supply, control panel and probe connection status is good.
2, open the device and enter the menu settings, select the parameters and modes that need to be adjusted. For example, you can adjust the output power, frequency, electronic welding point, focus depth, probe and other parameters.
3, insert the probe into the sink or elastic material, use the test tool to test the output energy of the probe, and adjust the position and angle of the probe to ensure that you can get the best detection results.
4, adjust the output power and frequency until the best ultrasound signal can be obtained, such as a clear echo signal and the appropriate amplitude size.
5. Adjusting the depth of focus and the focal position of the probe in order to obtain clear ultrasound detection images from different depths.
6. Test and prove standard samples to ensure that the detection sensitivity and accuracy of the device can meet the requirements. USMGO is an ultrasonic device commonly used in the medical, industrial and scientific fields.