What is the assembly principle of connector assembly?

Connector is a common component in electronic equipment, which is used to connect electrical signals or power sources between two electronic devices or circuit boards. The principle of assembling connectors mainly includes the following steps:

1. Prepare tools and materials: Before assembling the connector, you need to prepare necessary tools and materials, including manual or electric punching machine, copper tape, solder, etc.

2. Punching: Place the connector on the circuit board and punch holes on the circuit board according to the size and position of the connector.

3. Assemble the connector: Insert the connector into the hole on the circuit board and fix it with screws.

4. Connecting wire: Connect the input and output terminals of the connector to the circuit on the circuit board. Copper tape or solder is usually used to connect wires.

5. Test the connector: Finally, it is necessary to test whether the function of the connector is normal to ensure the normal work of the electronic equipment.

Note: When assembling the connector, care should be taken to avoid damaging the circuit board or connector to ensure safety.