How to adjust the satellite antenna for home communication?

First, if it is only a short-distance transfer (need to relocate), generally try to keep the elevation angle and the direction of the lid antenna unchanged; But it is difficult to do it in practice; Therefore, it is suggested that residents can move directly when connecting satellite TV, regardless of other factors, and the antennas of the satellite pot cover can be rearranged and adjusted after moving; Generally, two basic principles are followed, namely, the received signal is strong, and the received signal is stable and undisturbed; The method is as follows:

1, the cover of the satellite TV should be located in high and empty places, such as balconies and roofs, to avoid the signal being blocked by surrounding buildings; In addition, the antenna of the satellite TV cover must be aimed at the satellite direction (the antenna elevation angle of 45 degrees can be aimed at the southeast direction). When you turn on the TV, you can turn the antenna slowly to determine the direction and see if the picture is clear and stable.

2, satellite TV pot cover should try to avoid the interference of other signals, affecting signal transmission; If you should keep a distance from the nearby satellite TV pot cover, if there is a signal interference source from the ground, you should enclose a signal shielding wall with barbed wire or iron to isolate the interference source from the antenna of the satellite TV pot cover; But be careful not to block the antenna of the satellite TV pot cover to receive satellite signals.

Second, if it is a long-distance move (such as moving, etc. ), generally need to bring the relevant documents and service agreement of the head of household, and go through the address change formalities at the local account service business center; Because of the built-in GPS positioning module, the paging receiver can only be used normally at the initial installation place, and it can't be watched outside the initial installation place.