Cutting fluid filtration equipment situation

Cutting fluid filtration equipment, vacuum negative pressure filter Negative pressure filter consists of negative pressure working chamber, dirty liquid chamber, liquid storage tank, scraper drive system, waste paper winding mechanism, filter paper scraping mechanism, electric control system and so on. Under the continuous suction of vacuum pump, the cutting fluid quickly passes through the filter layer and enters the negative pressure working chamber, the vacuum filter pump pumps the net liquid in the negative pressure working chamber to the upper storage tank, the impurities in the cutting fluid are intercepted by the filter paper and form the filter cake, when the thickness of the cake reaches a certain thickness, resulting in a significant drop in the filtration volume, the pressure in the negative pressure working chamber decreases, and the water replenishment system starts to replenish the water in the negative pressure chamber when the value of the negative pressure reaches the preset value to eliminate the negative pressure, to wait for the negative pressure value to be reduced, the water replenishment system starts to replenish the negative pressure chamber to eliminate the negative pressure. Eliminate the negative pressure, when the negative pressure value is eliminated, the scraper transmission system starts, driving the filter paper covering impurities to walk forward for a period of time, and then enter the next cycle. Negative pressure filter can fully improve the utilization rate of filter paper, filtration precision up to 15 microns. Application areas: grinding processing, casting mold rinsing, parts cleaning, wire drawing Main features: ● Uninterrupted liquid supply, unattended, PLC automatic control, automatic fault alarm ● Small footprint, more economical than the same flow gravity flat screen filter footprint, to adapt to the needs of the modern industrial development of the inch ● High filtration precision, the use of impurity accumulation of the formation of the filter cake as a precision filtration layer, a very good improvement of filtration precision ● High utilization rate of consumables. High utilization rate of consumables, the pumping of water increases the speed of liquid passing through, which saves more filter paper than the same flow rate of gravity type flat screen filter ● Optional addition of refrigeration unit to keep the temperature of liquid supply stable ● Optional addition of magnetic separator to do the first stage of removing the impurities to reduce the consumption of filter paper. ● Stand-alone flow rate from 200 liters/min to 10,000 liters/min