Ti-nspire cx cas how to exit button mode ah!

One: If you have another normal machine at hand, the steps are as follows:

1, using a USB cable with small ports on both ends (the cable comes standard in the box), dock this keystroke test machine with another normal machine, both machines are in the power-on state;

2, "keystroke test "In the machine, open any document;

3. Press the document key, 9: key test, and then press 1: exit the quiz mode. At this time, make sure that both machines are on, both have power.

4, at this time automatically exit the key test mode, the machine automatically will restart.

2. If you have a computer with TI-Nspire software on hand, you can unlock it by transmitting a file through your computer. Steps are as follows:

1. With a small port at one end and an ordinary USB cable (the cable is also standard in the box), the key test machine and the computer connected;

2. In the computer to open any of TI-Nspire's software, create a new document, the file name is: Exit Test Mode.tns;

3. Press File-Save to Handheld in TI-Nspire's software on your computer, find the Press-to-Test folder in this device, and save it to this folder;

4. The machine in Test Mode will automatically reboot and exit Test Mode.