Two, load more line type
Three, as shown in the figure to add layers, colors, names, line type
Four, adjust the wall line width of 0.3
Five, and then set the text style
Six, start drawing, select the axis layer, turn on the orthogonal mode, select the straight line tool, drawing 48000 axis
seven, if you can not see the whole picture, to use the zoom all graphic button display, in order to see
eight, down as shown in the figure offset out of the other five horizontal axes, and then draw the vertical connection line, and then offset to the right of the 4000
nine, as shown below, all the axes to complete the drawing of the line
ten, set up a multi-line style, ready to draw 24 of the walls
XI, under the wall layer to enable the multi-line command, set the alignment style for the next, scale 1, along the perimeter of the wall
XII, and then adjust the alignment style to none, draw the interior of the two sides of the wall
Thirteen, set the multi-line interface styles, the wall interface to open up the wall
Fourteen, and then use the distance tool to draw the columns
< p>fifteen, the pattern fill command to the columns filled with solid blacksixteen, with the copy and array command to copy all the columns
seventeen, hide the other layers, draw vertical lines on the wall to locate the window point, and then use the trim command to trim the window
eighteen, using the vertical lines to trim a window, and then copy the vertical lines to the other windows to be opened on the wall
nineteen, in the window and door layer to draw four blue connecting lines when the window top view
twenty, and then open the door to draw the door
twenty-one, the following is a demonstration of the direction of the arc of the door, look at the coordinates, on the right for the value of the positive angle, down the left side of the direction of the negative angle value
twenty-two, and then draw the sliding door of the elevator entrance
twenty-third, copy another piece of Sliding door to complete
twenty-four, and then use the method in the drawing of the stairs
twenty-five, drawing the stairs method is to draw the first horizontal line, and then array all the steps, and then draw the middle handrail
twenty-six, and then draw the steps on the fold, indicating that there is a staircase above
twenty-seven, and finally, to give the staircase height, up and down directional arrows, the staircase of the several
twenty-seven, and finally, to give the staircase height, up and down directional arrows, a few staircase
twenty-seven. p>
twenty-eight, drawing the stairs up and down the direction of the arrow is a quick way to use the lead labeling
twenty-nine, drawing the elevation method as follows
thirty, and then draw the distance from the shape and the small quadrilateral to form the elevator floor plan
thirty-one, and finally draw out the axis number and the name of the map
thirty-two, the method of drawing the axis number is to define the value of the block attribute, the import of the value of the modifier Text can be