Bacterial contamination is a real problem and it is important to take every precaution!
If there is no ultrasonic cleaner, the stained equipment can not be sterilized accordingly. If only the stained machine is cleaned and put into the sterilizer without first cleaning the ultrasonic cleaner, the potential risk is still there, because the soil on the surface of the equipment can shield it from bacteria and viruses. The sterilizer does not clean the equipment directly, but only sterilizes it.
Applying an ultrasonic cleaner to carry out a better sterilization process is an easy and effective way to accomplish this goal.
What is the role of ultrasonic cleaning?
Metal, ceramics, plastics, rubber, and glass surfaces in medical machinery and equipment are all suitable for ultrasonic cleaning. From surgical and dental tools to manicure and pedicure tools, a wide variety of equipment will also be affected by microbial impurities residue, rust and even dust generated.
What solvents are used in ultrasonic cleaning?
Use a neutral pH ultrasonic cleaner solvent in your equipment for best results. Low pH solvents can also cause corrosion. Always remember that this process is cleaning, not sanitizing.
Tip: You can also hand wash your tools to remove any significant debris before putting them in the ultrasonic cleaner to ensure a thorough cleaning.
Does an ultrasonic cleaner count as autoclave sterilization equipment?
Yes! After the entire process of ultrasonic cleaning is completed, the equipment is placed in a sterilizer and subsequently sterilized for the entire process. Ultrasonic cleaning is a special process that prepares your equipment for the sterilization process to ensure that all surfaces are free of contamination. There is generally no need to dismantle tools when using this sterilization process.
How can I be sure that my ultrasonic cleaner is working properly?
A simple test using a piece of aluminum foil will tell you if the cleaner is compliant.
Cut a piece of aluminum foil the size of the ultrasonic tank and place the foil in the liquid, but don't touch the bottom
After about 30 seconds of duration, a highly consistent pattern of perforations should appear on the foil.
Perform this test first thing before the start-up of the ultrasonic cleaner equipment begins and make sure that the liquid is changed regularly, as the aluminum foil can leave contaminants behind.
Web Link