Why does it appear that the camera is not detected when videoing?

1. video when the camera is not detected this is how

You can try the following methods.

1. In the Control Panel - Device Manager - Image Device to see if there is a camera, if not reset the BIOS and then enter the system to see if there is a camera (BIOS reset method: boot F2 to enter the BIOS, F9 to restore the default settings, F10 to save the exit) If there is still no, you can bring the whole machine, invoices, warranty card to the local service center to let the engineer If you still don't have it, you can bring the whole machine, invoice, and warranty card to the local service center to let the engineer test it.

2. If there is a webcam under Control Panel - Device Manager - Image Devices, you can refer to the following method:

3. If you install the 360 security software, you can uninstall 360 security and restart to see if the webcam is normal.

4. If you have installed the camera driver using other software, right-click on My Computer - select Manage - select Device Manager - select Image Devices - right-click on Camera, select Uninstall, check Uninstall or OK to uninstall, reboot, and see if it is normal.

2. My computer can not detect the camera how to do

Solution steps: The first step: If your operating system is Windows 95, please upgrade to Windows 98 or above, because Windows 95 does not support USB interface. Step 2: Check the BIOS Setup to make the USB device valid.

If the settings are correct, or can not connect the camera, try to connect the camera to the second USB port. If it is still invalid, you may have installed the wrong driver or selected the wrong device, please check the system device and install the correct driver again, the operation steps are as follows (to Windows xp for example): In the "Control Panel" - "Administrative Tools "- "Computer Management" - "Device Manager", double-click "Other Devices" to view the contents.

Select Unknown Device and click the Remove button, then click Refresh. Refresh), the system will find a new device, follow the installation steps to reinstall the camera driver. Note: This is a complex issue that requires multiple attempts.

3. What to do if the camera is not detected

Dear ASUS users!

1. First, press the key combination Fn+V to turn on the camera, and then open QQ or Lifeframe software to view the video image.

2. Check the device manager to see if there is an image device or USB camera, if not, it is usually a system problem that does not recognize and load the device properly.

You can try to right-click on any device in the Device Manager, select Scan to detect hardware changes, restart the computer, and if there is still no such device, it is recommended that you back up your important data to a USB flash drive or removable hard disk, and then restore or reinstall the system to solve the problem.

I hope the above information can help you, thank you. If the above response still does not help you solve your problem, you are welcome to continue to ask questions, you can also log in to ASUS Online Instant Service: /support/ to further consult with engineers, thank you for your support and attention to ASUS, and wish you a happy life!

4. Why does the laptop always show that the webcam is not detected

This is a driver problem, download the webcam driver, go to the Lenovo official website to find the driver download, corresponding to the laptop model

The webcam driver is not installed correctly, at present, the operating system of Windows XP/Vista, Windows 7 has built-in most of the webcam drivers, but due to the lack of a driver for the laptop model, the driver is not installed correctly. Most of the camera drivers, but due to the ever-changing product technology, some of the new camera may have to re-install the included drivers in order to work properly, so it is recommended to install the driver that comes with the purchased camera package, download a driver, and auto-detect the driver installation.

If there is no problem with the driver, the camera may be faulty, and it is recommended to send it for repair or replacement.

Adoption of yo

5. camera not detected

A. Please right-click on "Computer" (or "My Computer") - Management - System Tools, open the "Device Manager". "Device Manager", see if there is "image device", hp webcam camera device or u *** device (if the camera driver is not installed, usually appear this prompt).

1. If there is no device with these names or the webcam device is not displaying properly, we recommend you to refer to the following actions:

(1) This situation is most likely caused by the webcam driver not being installed properly, please reinstall the webcam driver and try it. For more information on how to download the driver for your product from HP's official website, please refer to the following official document: /portal/site/hpsc/public/kb/docDisplay/?docId=emr_na-c02903029

2. If you don't have a webcam device, please click on "Universal Serial Bus" on your device's device manager. Click the triangle in front of "Universal Serial Bus Controller" to uninstall the USB Root Hub device under "Universal Serial Bus Controller", and then click "Scan for Hardware Changes" at the top of Device Manager to reinstall the USB driver. Then you can click "Scan for hardware changes" at the top of Device Manager to reinstall the USB driver. You can also right-click on these USB Root Hub - Properties - Power Management, and remove the checkmark in front of "Allow the computer to shut down this device to save power" to try.

3. If you see hp webcam under "Image Devices", please use the following method to assign the webcam device to a microsoft USB video device to try:

(1) Open Device Manager - Image Devices - HP WEBCAM

(2) Select "Browse your computer for driver software" next.

(3) Select "Choose from your computer's list of device drivers", next.

(4) Uncheck the "Show compatible hardware" box, select "Microsoft" for "Manufacturer", "Model" for "Compatible Hardware", and "Microsoft" for "Compatible Hardware". In "Model", select "USB Video Device", next.

(5) Display "WINDOWS has successfully updated the driver file" and close.

Second, if the above method can not be resolved, please check your computer to see if you have installed optimization software (such as Kingsoft AntiVirus or QQ Butler and other software), if so, please check the software protection settings to see if the camera is disabled, if so, please turn it on to try.

Third, if you confirm that the device manager to see the normal display of the camera device, please use the camera can open the software such as QQ software to test, in addition, I provide you with a Cyberlink YouCam camera call software, you can install this software to test whether you can open the camera:

ftp:ftp. hp/pub/softpaq/sp59501-60000/sp59986.exe

Fourth, if it is not effective, we recommend that you save the data to restore the BIOS defaults to try, the method is as follows:

When you turn on your computer, continuously click F10 to enter the BIOS, select the Exit option, select loadsetup Then select Exit--exit saving changes-yes, then you can save and exit.