Simple cad drawing beginner steps
Simple cad drawing beginner steps, CAD drawing many industries are in use, there are decorative design, furniture design and other industries are also in use, of course, the most widely used is the mechanical industry and the construction industry, the following share simple cad drawing beginner steps.
Simple cad drawing beginner steps 1
As a beginner, we first need to do is to recognize the CAD software, understand the function of the software, interface, operating tools in which
After recognizing these, we can first carry out some simple drawings, learning CAD first from the beginning of the drawing of a straight line, we enter the shortcut keys "L" press enter, you can see in the command line prompts to specify the first point
We next click on the canvas as the first point, move the mouse you can see a line appeared, but this line is not straight, right,
We look at the bottom of the orthogonality, click on it to turn on the orthogonality, then move the mouse you can see that the line can only appear in a straight line style, click on another as the end point, and then found that the line is not broken, press space to break the straight line
Then we learn to draw a circle, in the command line enter the shortcut key "C" and then you can see the prompts, is the three-point circle or highlights to draw a circle, or we are direct in the Click on it will appear a can be zoomed in or out of the circle, then we enter the diameter of the command line "200" press enter you can see a diameter of 200 circle
Click on each draw icon will be in the command line to appear in the corresponding prompts, we can practice more, learn to draw, some of the Simple. Edit also want to learn, such as "mirror" offset, array, these are more commonly used,
Simple cad drawing novice beginner step 2
Step 1
Familiarize yourself with the function of each icon, hover the mouse over the icon, the interval of one second will show the prompts.
Step 2
Consult an experienced person, or buy a book or study a web tutorial.
Step 3
Familiarize yourself with the drawing functions; use the different drawing tools by selecting the icons.
Step 4
Learn about the modification function; use the different modification tools by selecting the icons.
Step 5
When you are satisfied with the modification of the drawing, you can save it.
Step 6
The personalization can be modified with the "options" command.
Step 7
Summary.
Simple cad drawing novice step 3
CAD drawing beginner tutorials CAD drawings converted into pictures
Specific methods of operation are as follows:
1, open the software on the computer, enter the software home page, click on the software on the left side of the "CAD to picture! " option, enter the editing page.
2, click on the page in the upper right corner of the "Add Files" button, pop-up folder browsing window, batch import CAD files need to be converted, you can also drag and drop the CAD file to the specified location to import.
3, click the upper-right corner of the "Browse" button, will pop-up window to select the folder, and then select an easy to find the location as the output path of the file.
4, the file save the location of the completion of the modification, you can set the software below the output image color, page size, background color, output format, according to the actual needs of the settings.
5, after the completion of the settings, click the "Batch Conversion" button, and then wait for the conversion progress bar to reach 100%, you can find the converted images in the file save location.
The above is the CAD drawings into pictures of all the steps, you learned? Did not learn this method of partners, you can follow the steps in the article more than a few times. Learned partners, according to the need to try other conversion functions, I hope this article can help you, if you like this article, do not forget to collect and forward Oh!
How to get started with CAD mapping?CAD drawing from the following points to start: select the object mode, relative coordinates, layer mode, modification of the graphic object, drawing tools.
Specifically as follows:
One, select the object mode
There are two kinds, one is from the upper left to the lower right to select, one is from the lower right to the upper left to select, the two ways to select the results are different, the first can only be selected to be pulled out of the box, completely surrounded by the object; the second, where all the objects intersected by the virtual box, including surrounded by the object, as long as the touch! can be selected.
Second, relative coordinates
1, first you have to select a point as the initial position, and then move the mouse in a direction to draw a ray. If you want to draw a square with a side length of 200mm, then you need to first select the command, take any point, type "@200,200", and then enter to get a square.
2, "@" on behalf of the relative coordinates, if you want to draw a 100mm long, and the horizontal direction of the angle of 30 degrees of the line, then you choose the line command, and then arbitrarily select a point, type "@100<30", press enter. and press enter.
Three, layer mode
Layers of drawings, like the cover of a book outside the layer of transparent film, in order to better manage all the objects, each of which is drawn above the different categories of objects. In order to avoid complex graphics in the drawing process, the wrong choice, you can temporarily do not need to use the first off, the same can also be locked, frozen, etc., played the PS people should understand it.
Four, graphic object modification
Learn CAD drawing seriously, do not need to master too many drawing commands, but modify the command is used very often. Commonly used:
1, delete: shortcut key: Del. Windows universal operation, the most convenient.
2, copy: shortcut key: CP. is to copy one or more objects to a specified location, you can also copy an object continuously.
3, move: shortcut key: M. Move changes the position of the object.
4, Trim: shortcut key: TR. can be specified by the boundary cut unwanted parts.
5. Extend:Shortcut:EX. Used to extend the extension object exactly to the target boundary.
Five, mapping tools
beginning of CAD, has been the use of swift CAD editor, there are two versions of the standard version and the professional version, if you are still a beginner in CAD, it is recommended to use the standard version of the operation is relatively simple, the most suitable for novices to use. Also supports the opening of DWG, DXF and other file formats drawings, but also editing features.
How to insert pictures in CAD1, first of all, open the CAD software on the computer, and then in the CAD software in the upper toolbar, select "Insert" - "raster image reference".
2, then select the picture you need to insert.
3, next to confirm the need to insert the picture, there is no problem, click "OK" can be.
4, next in CAD with the left mouse button click, there will be a box, and then move the cross cursor, the box will become larger or smaller, choose a good size and then click the left mouse button.
5, then you will see the picture inserted.