Paper photos can be converted to electronic versions by scanning.
1, first of all, put the paper photo that needs to be scanned into the scanner with the front of the photo facing down.
2, then click the computer start button, open the "devices and printers".
3, in the open page, select the option of the current scanner model.
4. Click on the "Scanner Operation" option.
5, you can open the scanner, select the need to save the type of paper photos, such as selecting Save as "JPEG".
6, and then in the right side of the image to select the "color mode", and click Scan, wait for the scanner to start scanning can be completed after the conversion of paper photos to electronic files.
Configuration of three-color soft light (cold light source, color temperature of 5600K), two lamps, two lamps, matching lamps 12, supporting cable (6 m × 2) and 2 sets of plugs. The lamps are set up at the same height as the shoulder of the person being photographed, at an angle of 45 degrees to the left and right, facing the head of the person being photographed, and at a distance of 1.5-2 meters from the person being photographed.
Pixel not less than 4 million, the highest resolution (dpi): 2048, standard storage capacity (MB): 16MB, optical zoom: 4. Aperture F8; shutter 125 / sec, the imaging area above and below the requirements of the head of the head of the empty 1/10, the head of the head accounts for 7/10, the shoulders accounted for 1/5; left and right of the empty 1/10.