Recently a domestic fluorinated foam manufacturers in some areas of the country to spread false statements, denigrate our products, and ultra-low prices to promote its poor quality products; please customers in the consultation of product information must understand the following two issues, do not momentarily by some bad manufacturers of deception, suffered unnecessary losses, and even cause serious adverse consequences! First of all, when lobbied by the sales staff of certain fluorinated foam brands, please be sure to understand the bottle material used in their products and let the other party issue the relevant test report of the bottle material. This is because according to expert opinion and common chemical knowledge, fluorinated foams are acidic, and when they come into contact with metal, they will react with it and produce harmful substances, so fluorinated foams should not be used in metal containers.Germiphene's fluorinated foam bottles use high-quality, high-strength PET sol, and the test report shows that this material can be used to contain acidic fluoride. For other brands, a similar test report could not be issued because the material used for their bottles has not been tested and is unsafe. According to the regulatory requirements of the NIDA, when registering a product the testing center will only test the quality indicators of the fluorinated foam solution itself and will not pay attention to its bottle material! Considering the special use object of fluorinated foam (children), we should pay more attention to this. Secondly, there are salespersons from domestic manufacturers claiming that they are also selling imported fluorinated foams, so please ask for their medical device registration certificates and check them carefully. According to the State Drug Administration (SDA), the registration number of the imported product is in the format of: State Food and Drug Administration Measures (into) word **** No. ******, which is directly issued by the SDA. If the registration number is (quasi) ******, then the product must be domestically produced and is usually issued by a local drug administration bureau (e.g. Beijing Municipal Drug Administration). If the use of imported liquid and filling in the country, it should also be in its instructions and the outer box labeled with its country of origin, otherwise it is the authentic national brand. Finally, there are some salespersons who say that the fluorine concentration (1.23%) of our fluorinated foam products exceeds the standard, claiming that the products with fluorine concentration of 0.6% are safe. In fact, this is a complete lack of understanding of international standards as well as Germiphene products, and even an intentional attempt to confuse and discredit them. At present, the fluoride concentration of fluoride foam is 1.23%, which is common in the international market, and it needs to be operated 2 times a year for children, and it is only necessary to do a simple query on the Internet to understand this point, and claiming that the fluoride concentration of 1.23% exceeds the standard is without the common sense of stomatology or out of their own prejudice for their own narrow interests. In the Chinese market, in addition to the concentration of 1.23%, there is also a concentration of 0.6%. This is actually the domestic manufacturers in order to achieve differentiation of marketing and "created", according to the oral medicine experts showed that, if the use of 0.6% fluoride foam, it is best to operate 3-4 times a year in order to achieve the best anti-caries effect. It is because of this special situation in the Chinese market that Germiphene has developed fluoride foam with 0.6% fluoride concentration especially for Chinese children. Therefore, we provide our customers with two choices of concentration: 1.23% and 0.6%, and we will let them choose the suitable concentration according to their needs. However, the real safe fluorinated foam is not the fluorine concentration of 1.23% or 0.6%, both of which are absolutely safe.
The safety of fluorinated foam products depends only on the product formulation, manufacturing process and procedures, product packaging, and the quality of production and quality assurance personnel. Germiphene has been manufacturing oral products for about 60 years since its establishment (in comparison, domestic manufacturers have only a few years of production history), has the qualification of manufacturing pharmaceuticals, medical devices and natural health products, adopts strict GMP workflow, and undergoes Health Canada's inspections every year, so the safety of its products is absolutely higher than that of domestic manufacturers.
We hereby solemnly appeal to our customers to be aware of the above issues when consulting on product information, so as not to be deceived by some unscrupulous manufacturers and suffer unnecessary losses, or even cause serious adverse consequences!