How to use Fish Leap Oxygen Concentrator

RUNNING USE: When the red light of the power supply is on, pour pure water up to the designated line of the humidification cup and install it at the outlet of the oxygenator. When the oxygen delivery tube is adjusted with other equipment parts, if you see the green light also lights up, then it means that your Fish Leap Oxygen Concentrator has been successfully run up.

According to the instructions of the submersible oxygen generator, its main operation is as follows: Place the main unit on the floor or hang it on the wall outside and install the gas-producing filter. Nail the oxygen supply grommet to the wall or bracket as required, and then hang the oxygen supply.

Question 1: How to operate Fish Leap Oxygen ConcentratorConnect the humidification bottle (please fill in the right amount of pure water according to the instruction manual) and oxygen absorbing tube, turn on the power supply, and you can get the pure oxygen with high purity in 1-2 minutes. If needed, this oxygen concentrator can supply high purity oxygen continuously for a long time.

Push the handle forward to loosen the airtight seal on the top lid, then open the lid. Fill the filter humidification chamber on the left side of the inner barrel and the reaction chamber on the right side with water to the water level line. Add the oxygen generating agent to the reaction chamber on the right side of the inner barrel, first with Reagent A and then with Reagent B.