Here is a brief introduction of various easy-to-use cleaning props, which will make you get twice the result with half the effort and make things easier!
Because information products are taboo to humidity and scratches, people should not directly wipe computers and peripheral products with wet rags when cleaning, so as to avoid water droplets falling into the machine and causing short circuits; Generally wipe with a dry cloth. When you encounter dirt that is difficult to clean, you can use a water sprayer to spray a little water on the wiping cloth to deal with it.
Small steps make you more labor-saving:
Nowadays, the popular dust-removing paper used on paper mops, combined with gadgets in life, can make it easier for you to clean the computer and its surroundings. Sometimes the home space is small, the computer is too close to the adjacent items, or the gap between the upper and lower compartments is not easy to move and clean. As long as you take a ruler of more than 30 centimeters and tear a piece of dust-removing paper to wrap it, you can go deep into the gap and wipe it back and forth to remove dust.
If it is like the thin seam of the object itself, such as the computer connection port hole and the small gap on the Xbox shell of the TV game instrument, people can easily remove dust by taking toothpicks or chopsticks, wrapping the dust removal paper on it and rubbing it in one direction. Now, you can get ready to start!
1. Computer screen
The screens of desktop computers and notebook computers are most afraid of scratching. You can use a special dust blower to clean the camera lens, blow off the dust on the screen first, and then wipe it with superfine fiber wiping cloth. When wiping the surface of the screen, it is suggested that people push it away from the middle of the screen to both sides instead of wiping it back and forth to make the screen cleaner.
When people clean different types of screens, don't be lazy to "cloth" to the end, otherwise they may bring the last cleaned dust particles to another screen and even scratch the surface of another screen.
When cleaning this superfine fiber cloth, you can wash it by hand or throw it in the washing machine. Do not use soft essence, so as not to affect the fiber descaling ability. If you use it for a long time, you feel that the cleaning ability of the cloth is not as good as before. You can soak it in hot water for about ten minutes to restore the elasticity of the fiber.
2. Keyboard and mouse
Usually, manufacturers advise not to eat or drink near the computer, but when people play computer games or catch up on homework in front of the computer at night, they can't help eating a lot, which often leads to crumbs such as biscuits and hair leaving stains on the keyboard or mouse.
People can use workshop dusting paper to gently sweep away the big hair and dust on the keyboard in one direction, and then patiently use a dust blower or a small vacuum cleaner specially designed for fine seams to blow or suck away the dust between the keys.
Water stains or dirt on the keyboard or mouse can be lightly sprayed on the cloth once or twice with a water sprayer, or directly wiped off with a cotton swab. Don't let the cloth or cotton swab get too wet. As for the roller mouse, after one year of use, the roller ball at the bottom often absorbs hair and dust. According to the manufacturer's instructions, take out the ball and wipe it, and gently remove the tiny debris stuck to the mouse with a cotton swab.
3. Computer and peripheral shell
Information products are prohibited from getting wet and scratching. Clean the shells of computers, printers, scanners, hard disk boxes, network connectors, etc. As long as you wipe it in one direction with a dry cloth, you can remove the dust on the surface. Dust often collects in the jack connected to various computer interface devices on the back of the shell. Because some places are relatively small, you can use a dust blower or mini vacuum cleaner to remove dust.
4. Inside the computer
If you have the concept of a built-in desktop computer, you can consider an annual cleaning of the personal assembled computer.
Because the computer has a fan to dissipate heat, it often introduces dust and accumulates in it for a long time. After people unplug the power supply and disassemble the shell, they can label the adapter card and take it off, so that it can be restored according to the numbered position after cleaning. Dust on the motherboard and interface can be cleaned with a dry old toothbrush. If there are oxidation spots on the contact of the adapter card, you can remove them with an eraser.