What is ultrasonic cleaning equipment?

Ultrasonic cleaning (ultrasonic cleaning) is the use of ultrasonic waves in the liquid cavitation, acceleration and straight into the role of the flow of liquid and dirt directly, indirectly, so that the dirt layer is dispersed, emulsification, stripping and achieve the purpose of cleaning. The current use of ultrasonic cleaning machine, cavitation and direct flow into the role of more applications.

Ultrasonic cleaning machine consists of the following parts:

1) ultrasonic system: including transducer and ultrasonic generator.

(1) transducer: transducer using special high-temperature, vibration-resistant, high-viscosity resin adhesive supplemented by a special method to be fixed, never fall off, and can withstand 100 ℃ ~ 150 ℃ high temperature.

(2) ultrasonic generator: high-power ultrasonic generator can be ultra-audio IGBT power electronics for the main components of the composition of the ultrasonic generator circuit is advanced, the structure is complete, supplemented by sensitive and reliable integrated control system. Various ultrasonic generator can work independently, can also be used in parallel to complete the large-scale cleaning project.

2) heating and temperature control system. Heater is usually made of stainless steel tubing, acid and alkali resistance. The purpose of heating is to heat the detergent to increase the washing effect of the washing machine. Temperature automatic control, can be adjusted within the appropriate range.

3) cleaning tank: cleaning tank is generally made of stainless steel by argon arc welding and become, the tank body is set up with slagging access port, insulation layer, etc., to ensure that the water level should be at least 200 mm above the transducer box.

4) tank liquid circulation filtering system. In the system has a filter, dynamic filtration of the tank liquid to maintain the cleanliness of the tank liquid. When the workpiece out of the tank, after filtering the liquid flow through the tank body of the upper part of the spray link on the workpiece for a rinse, in order to wash off the workpiece out of the tank when the surface of the adhering oil, in order to avoid its next channel tank liquid pollution.

5)Conveyor system: according to the shape of the workpiece being cleaned, volume, batch, etc. to determine the ultrasonic cleaner conveyor and control mode.

6) spray rinsing system: according to the surface condition of the workpiece to be cleaned, some cleaners are equipped with spray rinsing process, ultrasonic cleaning and spray cleaning organically combined.

7) drying system: according to the condition of the cleaned workpiece, some cleaners are equipped with drying system, drying system is mainly composed of heaters, fans, blowing nozzles and other components of the temperature automatic control.