The quality inspector's personal work summary of 5
Recall that in this year both busy and rewarding, as a quality inspector, feel both happy and sad. In order to review the work experience, write a summary. The following is my personal summary of the work of the quality inspector for you, I hope to help you.
The quality inspector's personal work summary selected 1
20__ year is about to say goodbye, recalled that in this year both busy and gained, so I feel happy and worried. I have been in the injection molding workshop for more than 3 years of quality control work, the position does have a certain work pressure, but for me there is no pressure is equal to no power. As a quality inspector I, in order to make their own growth faster, work to get a greater improvement, do the following work summary:
First, the quality of the work in the gatekeeper
As a quality inspector, not only to master the professional knowledge of the test, but also need to be serious and careful, in order to find the problem, find out the problem, solve the problem. So this year's field of quality work has benefited me greatly. Before the inspection, learn to read the product drawings, with the product trial assembly. According to the requirements of the quality process, do a good job in the process of supervision, to find and correct problems in the inspection process. Cooperate with the operator of the product quality for a comprehensive inspection of the product problems arising in a timely manner, corrective. Special products to be processed in the whole process of tracking and inspection to ensure that each process is qualified. Strictly put the quality of the products into the warehouse, summarize and analyze the results after the incident, in order to facilitate the continuous improvement of the work. Every day before the end of work, the quality of the inspection process to do a good job on the shift handover. Documentation of the inspection process in the future is prone to the problem of desirable, and constantly improve the level of personal professional inspection; will be the existence of quality problems and the need for the company to coordinate the solution to the problem seriously reflected.
Second, the work of the shortcomings and problems
1, the quality of the product there is a gap in the requirements, resulting in a small number of returns. On the one hand, due to personal inspection is not meticulous enough, not enough professional knowledge, on the one hand, the workload is more, and when the time is longer, the work efficiency is not high.
2, in the discovery of quality problems in the dare not clearly determine whether, decisiveness is not strong, in dealing with some of the things need to lead the help.
3, due to the current shortage of quality control staff, long working hours, increased workload, such as a person on vacation no one to replace.
Third, next year's work intention and improvement
1, I will further carry forward the advantages, improve the shortcomings, and do a good job. To maintain a good state of mind, carry forward the spirit of hard work and endurance, know the difficulties, excellence, rigorous and meticulous, learning and enterprising, dare to fight. Clear thinking, improve efficiency.
2, before the inspection, I first need to understand the products to be inspected, and before the inspection should be well prepared beforehand, the inspection is carefully monitored.
Finally, my company for the humanized management, focusing on the training of staff skills, and the team spirit, as well as the enthusiasm to go to work actively, I believe that I will be in the development of your faction of this big family, **** growth, we will grow!
To everyone a lot of help, I also learned a lot of knowledge in everyone's body. A year since the biggest feeling in my heart is to do a qualified quality inspector is not difficult, but to do a good quality inspector is not so simple. I think: a good quality inspector should not only be modest and upright, to the cause of the work seriously and conscientiously. And in the ideological and political, work skills should be more specialized. I, as a young quality inspector need to learn a lot of things are still a lot.
As a quality inspector, I always have to not feel the great responsibility on their shoulders. Therefore, I am in the actual work, when strict requirements for their own, to do small and careful. First of all, we must always have a quality policy as an indicator, clear product quality responsibility.
In the work, I seriously invested, and in my spare time to learn other products, see more product drawings, can understand the product drawings, the principle of the construction of the performance of a certain understanding. And listen carefully to the experience, carefully recorded. In the future work, I will redouble my efforts to learn professional knowledge, master a variety of skills, to achieve a multi-functional, to make up for the lack of manpower when the workload is large defects, to ensure the normal operation of the department's work.
"People are not sages, who can not fault" I also had some mistakes in the work, but I dare to face. Through the leadership, colleagues' criticism, help and their own efforts to correct, never allow themselves to fall twice in the same place. It is because I am not proud in the face of victory and do not bow down in the face of failure, I will grow and improve rapidly in the struggle. In addition, the train runs fast also depends on the locomotive, whether from the ability to work, or from the idea that there are many shortcomings. In these aspects I have been the departmental leadership and the staff of the department of the correct guidance and help, so that I can improve my working ability, clear direction, and a correct attitude. Thus, I laid a good foundation for my development.
Through this year's work, I am lucky to have learned a lot of things. But it is still far from enough, especially in terms of diversified skills are still tender. At the same time, with the increase of the company's business, the development of new products, it can be expected that our work will be more heavy, the requirements are higher, need to master the knowledge of higher and wider. To this end, I will be a new state of mind into the work, will work more diligently, study hard, and strive to improve all kinds of work skills, work efficiency. Do a good job and make due contribution.
The quality control officer's personal work summary of the selection of 2Time passes, turn to the company almost four months. This is a precious experience in my life. During this period of time, leaders at all levels in the work has given me great help, in life has given me great concern, so that I fully feel the leaders of the "Hai Nai Chuan" broad-minded, feel the five "letter-based, to and for the noble" unique corporate culture. culture. At the same time, I was proud to have the opportunity to become a member of the Five Bureau. In these four months, in the leadership and colleagues in the care and guidance, through their own efforts, all aspects have made some progress, now my work is reported as follows.
First, through the training and learning and daily work accumulated so that I have a deeper understanding of the quality inspector.
As a quality inspector, not only do we need to master professional testing knowledge, but also need to be serious and careful in order to find problems, identify problems and solve problems. So these four months of quality work on the scene has benefited me greatly. In the inspection before, to learn to read the building structure drawings, familiar with the specification atlas, do a good job in the matter of supervision, to find and correct the problems in the inspection process. Cooperate with the constructor to make a comprehensive inspection of product quality, and put forward and correct any problems in the product in time. The special process of processing technology for the whole process of tracking and inspection to ensure that each process is qualified. Each process of the incoming products to strictly control the quality of each process, the results of the aftermath of the summary analysis, in order to facilitate the continuous improvement of the work. Every day after work on the inspection process to find out the past
After the problem prone to desirable, and constantly improve the level of personal professional inspection; the quality of the scene and the need to coordinate the leadership to solve the problem seriously reflected.
Second, to comply with the rules and regulations, work seriously, so that their quality is constantly improved.
The quality of professional ethics and dedication is the guarantee for the smooth implementation and ultimate success of each job. In this four-month period, I can comply with the company's rules and regulations, conscientious to do the work of the profession, four months never late and early retirement, with enthusiasm, actively and conscientiously complete each task, seriously fulfill the duties of the post, the usual life of solidarity with colleagues, and continue to enhance their own spirit of teamwork. A book "details determine success or failure" let me feel proud, a positive and open-minded mindset, a good habit, a plan and completed on time is so important, and ultimately determine the success or failure of a person. This book allows me to have a further understanding of their own lives, the desire to have a breakthrough I will be in the future work and life when to remind themselves, so that their future life path more and more wonderful.
Third, seriously study the functions of the post, the ability to work has been improved.
According to the current division of labor, my main tasks are:
(1) responsible for the site of the inspection of the various processes;
(2) participate in the development of technical programs, technical delivery, construction organization plan;
(3) construction progress report and other temporary work.
Through the completion of the above work, I realize that a competent manager should have good language skills, strong organizational leadership, flexibility to deal with problems, effective external contacts.
In these four months of work, I also y appreciate my personal shortcomings: insufficient on-site inspection techniques, the inspection process is not very careful. The first two months of the mind can not be adjusted, think do quality inspector can not learn things, began to lose confidence in the work, the use can not work well. Later I realized that I was wrong, it is difficult to find a satisfactory job outside, we must do a line of work to respect a line of work, for the current work is responsible, but also for the enterprise is responsible for. For this reason, in the future work, I will continue to work seriously, learn with an open mind, improve the level of inspection, master deeper knowledge. I am a good at facing difficulties, accept the challenge of people, I also hope that the company can provide a variety of challenges, so that I get different exercises.
The company's humanized management, focusing on the development of staff skills, and team spirit, as well as the enthusiasm to work actively. I believe that I will grow up as soon as possible in the development of the company family!
The personal work summary of the quality control officer selected article 320__ year in the intense and orderly work towards the history. Review 20__ in the leadership of the care and help, to the leadership of the minister and departmental plans as the center, more successful completion of the work. And actively and effectively complete the minister and other work assigned by the leadership.
First, the completion of the work
1, test work
The principle of seeking truth from facts, and actively work hard to do a good job in the test. 20__ annual **** counted 170 batches of completed tests, the timely issuance of the experimental report in a timely manner to summarize the report.
① Completion of the production department to send inspection of the semi-finished rubber test 109 batches, there are abnormalities 3 times.
② completion of the cover seal involved in the cover seal burst test 850 pieces (42 batches).
③ Muzzle top break test 13 batches.
④ muzzle plug pull-out test 6 batches.
⑤ Participated in other tests assigned by the leadership 3 times.
2, inspection work
work in the interests of the company as a prerequisite for the purpose of identifying problems and solving problems. Timely feedback on the problems found to report, and strive to solve the problem as soon as possible to reduce waste.
① completed 20 batches of outsourcing parts inspection throughout the year, of which 5 batches do not meet the acceptance specification requirements, timely feedback information, concessions to receive. Completion of new product measurements 24 kinds of 2 kinds do not meet the requirements of the drawings. Materials into the factory inspection records" completed 74.
② January-September according to the departmental plan 0.5 hours a day for the production site inspection and record. after September, according to the requirements of the day shift production site production of products for the first mold inspection and record 1-1.5 hours a day.
③ Participate in the inspection of products such as muzzle covers, cartridges, wrap-around shells, sealing cover pieces, three-proof plugs, muzzle plugs, armaments seals and other products with large batches.
3, raw materials warehouse
20__ years in strict accordance with the company's requirements to tighten the control of raw materials, auxiliary materials and supplies, and seriously do a good job in the warehouse management, to do a timely report. The year involved 122 kinds of raw materials and production materials in and out of the warehouse, an increase of 61 kinds compared to the previous year.
4, other work
work, and strive to improve efficiency, obedience to the allocation, follow the instructions. Where major decisions about, must first consult the departmental leadership, after approval before implementation.
① annual completion of the bar code printing 210,000, an increase of 110% over the previous year, and in the printing speed and quality has made greater progress, such as: small bar code in the premise of quality assurance improved by about 20%.
② preparation of non-military products large certificate of conformity and material reports 382.
③ Completed the work of 20 __ military inspection products delivered to the single batch of the work of organizing; finished product inspection records.
④ 74 records of material incoming inspection were completed.
⑤ Other auxiliary work: cutting wrapping paper, preparing packing bags, statistics of materials needed for each order, and listing procurement plans.
⑥ Participate in the whole process of preparing information for the safety standardization audit.
Second, loyal to their duties
1, proactive participation in various activities organized by the company. Loyalty to duty, care for company property, carry forward the spirit of ownership, starting from the self pay attention to environmental details, saving resources, and can do to take the initiative to remind others.
2, work, strengthen the technical documents, and combined with the actual situation, 5 times found that the technical documents require the issue of inconsistency, contradictory, practical operation does not apply. The abnormal problems found in a timely manner, take the initiative to report to the Minister and put forward feasible proposals (such as: "Styrofoam sheet into the factory acceptance specifications" and the actual product requirements of film thickness contradictory, "acceptance of raw materials specifications" of the applicability of the revised proposal, "reinforcing plate operating instructions" and the drawing requirements are not uniform, etc.).
Third, the work is not enough and
1, enthusiasm is more than enough patience.
2, more than serious, lack of persistence.
3, more than positive, not enough learning.
Fourth, the direction of the work in 20 ___
1, play the subjective initiative, seriously treat every job, strengthen the study of business knowledge.
2, improve the flexibility of the work program. Obey the management and follow the arrangement.
4, persevere to overcome their shortcomings and make up for their shortcomings.
5, to love the company, love the work, do a good job of information communication and proactive reporting.
6, the daily inspection notes and work records, seriously summarize the work experience, to promote work improvement. In short, in the future work to continue to learn, and strive to improve work skills. I believe our company will be better and better.
Selected personal work summary of the quality control officer 4With the end of the first quarter, we are about to usher in a new journey. New breath, new goals, under the correct leadership of the company at all levels, I believe we will achieve good results in the second quarter. Review of the first quarter of the work I summarize as follows:
First, down-to-earth work, one step at a time
As a veteran employee, I am well aware of compliance with the company's rules and regulations is my personal treatment of the work of the bottom line, three years, I do not be late, do not leave early, no absenteeism, something in advance to ask for leave. Remember the instructions and criticism of the leadership and actively improve.
Three years of work experience, so that I know as an inspector, I shoulder the responsibility, if because of my negligence will bring the company a serious impact, so I actively and seriously in the work of each inspection work, of course, I can not be separated from the achievements of the leadership of the support and cultivation of the future in the work, I will continue to work hard and improve the work of the task, and actively communicate with the leadership of the colleagues, to improve the quality of work, and continue to learn to adapt to the work of the company, and to improve the quality of the work of the company. In the future, I will continue to work hard and perfect the work task, and actively communicate with the leadership colleagues to improve the quality of work, continuous learning to adapt to the development of the company.
Second, life satisfaction, a strong sense of belonging to the enterprise
The company organizes paid trips every year to carry out many collective activities, reflecting the company's humanistic care for the majority of employees. I think that working in a successful enterprise is not only to solve the problem of subsistence in life, but more importantly, a reflection of the values of life, is to realize the value of life stage, the company will provide each employee with a stage for development and the opportunity to achieve career". Thank you for the company to give me this opportunity to show their own, such an enterprise, so that I have a strong sense of belonging to it, I am bound to cherish, I will follow the "exploration, innovation, unity, improve" the spirit of enterprise, and constantly improve themselves, with the progress of Dongda ****.
Third, the future intention
A year's plan is in the spring, the spring is the beginning of a new, is to work hard is the season. I will always set up a sense of urgency not wait for me to spur their own continuous efforts to broaden their knowledge, improve their professional skills and overall quality, so that learning can be put to use, to play their maximum potential for the development of the company's contribution to their own strength.
The personal work summary of the quality control officer selected article 5Thank you for the company to bring us a platform for growth, so that I continue to learn in the work, and constantly improve, slowly improve their own quality and talent. Looking back, the company accompanied me through a very important stage of life, so that I know a lot. I here to the company's leadership most heartfelt gratitude, your assistance in order to make me more at ease in the work, but also because of your help, in order to make me in the company's development to a higher level.
In the past year, my main work is responsible for all incoming materials for environmental testing, followed by assisting the incoming inspection inspector for material inspection. In the work, closely around the company's central work, against the relevant standards, strict self-discipline, better completion of the work tasks. In the style of discipline, solidarity with colleagues, pragmatic, optimistic, always continue to rigorous and serious work attitude and meticulous work style, diligence, hard work and do a good job of every job.
In the incoming ROHS test and to assist the feed inspector work seriously, attitude, thunder and wind, the courage to take on the heavy burden, dare to be responsible, regardless of personal gain or loss, conscientious and hard work, to complete each job. At the same time to help feed the work, I insist on working while studying, but also from learning a lot of knowledge, so that their overall quality level continues to improve. Always adhere to the strict requirements of self, diligence, always bear in mind the company system, wholeheartedly for the company's service purposes. In my ordinary and ordinary jobs, I strive to do my own work and leadership arrangements for each task.
In general, a year, the strict implementation of the company's rules and regulations, better fulfillment as a ROHS tester's professional and technical duties, but also better to complete the work of the year.
With the implementation of the company's systems, it can be expected that our work will be more onerous, the requirements are higher, the need to master the knowledge is also higher and wider. To this end, I will work more diligently, study hard, and strive to improve the quality of culture and a variety of work skills, for the company to make due contributions. Fully aware of people's strengths, use people's strengths, gather people's strengths, show people's strengths to give full play to their subjectivity and work with the heart to improve the overall quality of self, so that the potential for self-strengthened work more and more perfect. I fully realize that I am not only a ROHS tester, but also an executor of ROHS directives. In the subsequent work I will work for the new goals set by the self and strive, that is, to step up learning, better enrichment of self, to meet the challenges of the new period with a full state of mind.