Difference:
1, shell
Industrial LCD monitor shell design is generally used in the all-steel design, the panel is divided into ordinary iron, stainless steel, stainless steel, aluminum panels, and other different materials, dustproof, shockproof special design.
Ordinary monitor shell material is generally used is a plastic shell, and the plastic shell of the radiation suppression is not strong, anti-interference ability is weak, the signal is not stable, will be interrupted.
2, temperature
The use of industrial-grade LCD, in the case of high environmental requirements, consider using a wide temperature (-40 to 85 degrees) LCD.
3, contrast
For industrial-grade displays, users may not be viewing at the optimal distance or under ideal lighting conditions, so a higher contrast display is the best choice. For 10.4-inch, 12.1-inch, or 15-inch monitors used in most industrial applications, a contrast ratio of 450:1 is ideal.
4, brightness
Since most ordinary monitors are used in indoor environments, the brightness is about 250 to 300 cd/m2 (nits), the diagonal size of 15-inch LCD is the most commonly used, however, this brightness level of the monitor used in industrial environments can not meet the requirements, this is due to the ambient light will be much stronger, and its brightness easily exceed the brightness of the LCD backlight.
Additionally, touchscreens are often used in industrial environments, which also reduces the brightness of the display and makes it appear darker. In typical medical, industrial, and payphone booth applications, the required brightness should be at least 450 cd/m2. response time In the past, passive display technologies, including LCDs, have had very poor response times compared to active light emitting display technologies.
Expanded Information
Industrial display classification:
Industrial LCD installation can be divided into top shelf, flip-flop, embedded, open and module.
Shelf type industrial display used in industrial control cabinets, chassis and other equipment, chassis is generally in units of U, 1U is equivalent to 44CM. commonly used 4U, 6U, 8U and so on.
Flip-flop industrial monitors are installed upside down from the back of the cabinet, and the front of the cabinet only shows the LCD display area.
Embedded industrial monitors are embedded directly from the front of the cabinet and fixed with hooks on the side.
Reference: